• 한국정보통신학회논문지
• /
• 제21권1호
• /
• pp.157-164
• /
• 2017

본 연구는 균일한 조명을 얻기 위해 중첩 조명 모델(overlapped illumination model)을 사용하여 자유 형상 렌즈(freeform lens)를 제작하였으며, 제작한 LED 렌즈들의 특성을 비교 분석하였다. 제작한 렌즈는 LED 광원의 위치변화, 두께 및 기울임을 이용해 성능을 평가하였다. 아울러 조명영역은 평균 조도 (average illuminance)와 조도 균일도 (illuminance uniformity) 변화 값으로 측정하였다. 광도 분포의 Z축 방향변화에 대해서는 중첩 모델과 발산 모델이 대체로 비슷한 공차 특성을 보였으나, 렌즈두께 변화에 대해서는 중첩모델이 발산모델에 비해 조도 균일도 공차 특성은 현저히 개선됨을 확인하였다. 또한, 발산 조명 모델로 설계된 렌즈가 전반적으로 좋은 성능을 나타냈으나, LED 방출에 대한 성능은 중첩 모델에서 그 편차의 폭이 상대적으로 적게 나타났다.

• 한국패션뷰티학회지
• /
• 제1권1호
• /
• pp.133-142
• /
• 2003

As you see, there's no difference of the hair's before and after Magic straight permanent on the example A's hair's thickness, the rate of the tense and the C's rate of the tense, but we can find that there are a lot of difference of the A's strength of the hair, the B's hair's thickness, the strength of the hair, the rate of the tense, the C's hair's thickness, and the strength of the hair on the before and after the Magic straight permanent. That is to say, there are more damage on the condition of normal hair than the one after the Magic straight permanent. On the change of the hair's physical character, before the permanent, the hair's schedule was regular and had the healthy head skin of clear mutual boundary But after the Magic straight permanent wave, the hair's schedule changed to unregural, had unclear mutual boundary of the head skin and the schedule was taken off so the cortex showed up and so on, every condition of the damage was very heavy. On the effect of the treatment, even though it gaves the worth condition of the hair, after the Magic straight permanent formally the change of the hair gives the beautiful straight.

• 한국의류학회지
• /
• 제19권1호
• /
• pp.142-148
• /
• 1995

In this study, FVM (Finite Volume Method) which is one of the 2-dimensional numerical approach has been conducted to anticipate the temperature distribution between skin and clothes by the change of air temperature and fabric characteristics including fabric thickness. Several experimental works have been done to understand the thermal insulation effect (If fabrics on a human body by measuring the averaged temperature in the air layer between skin and clothes or by measuring the thermal resistance of fabrics. However, the formal method is inconvenient to measure the temperature distribution in the air layer to evaluate the insulation rate of the clothes on the skin because the real size of the clearance between skin and the clothes is too small to place the temperature sensor, and in the Tatter method the relationship between human body and the fabrics are ignored. However, the numerical method will be very effective and economical way to evaluate the insulation efficiency of clothes when the computational result is in the reliable range. As the result of this study, the temperature change in the sir layer between skin and clothes was linear to the fabric thickness and this result coincides with many previous experimental results. Moreover, it is possible to predict the optimum fabric thickness for the best thermal insulation in the air layer between skin and clothes.

• Journal of Forest and Environmental Science
• /
• 제30권2호
• /
• pp.226-232
• /
• 2014

To understand transition characteristics from wood to charcoal the dimensional changes of carbonized woods at low temperature from $300^{\circ}C$ to $350^{\circ}C$ at the intervals of $10^{\circ}C$ were investigated. Three species of hardwoods and two species of softwoods were used in this study. Measurements of dimensional changes of cells were observed by stereoscopic microscope and an image analyzer. The apparent volume of each specimen decreased greatly with increasing temperature. Severe cracks and collapse were observed frequently in hardwoods and hardly in softwoods. Vessel diameter and tracheid cell wall thickness of the wood samples were decreased with increasing carbonization temperature. Contraction of vessel diameter in tangential direction was greater than that in radial direction. Cell wall thickness of tracheids decreased with increasing carbonization temperature. Consequently, even though it was small range of carbonization temperature, dimensions of wood components were changed considerably.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.2963-2971
• /
• 2000

In order to obtain more realistic fracture resistance curve, research is currently underway to introduce new parameter and to quantify the constraint effect. The objective of this study is to investigate the relationship between the constraint effect of a size(plane size and thickness) and the fracture resistance curve. In this paper fracture toughness tests were performed with various plane size and various thickness of specimens in two materials. The test results showed that the effects of plane size in th4 J-R curve were significant and the curve was risen with an increase in plane size. However, relatively weak influence was observed form the change of the specimen thickness and size. The stress fields near the crack tip of th specimen is close to the HRR field according to increasing the plane size and Q stress appears different value according to material properties and the plane size.

• 콘크리트학회지
• /
• 제9권3호
• /
• pp.157-166
• /
• 1997

본 연구에서는 대기 습도변화에 의한 콘크리트 보수체(기층 콘크리트/보수 모르터)의 파괴현상을 조사하기 위해서 보수체내의 비정상적인 습도분포 및 습도응력을 계산하였다. 이러한 계산은 시멘트 모르터로 보수된 접촉면이 없는 보수체에서 보수층 두께(Do=05-2.5cm)와 보수 작업전 기층 콘크리트 표면의 습윤처리 시간(tc=1-5days) 및 대기습도(Ho=50~80%)를 주요변수로 하여 수행되었다. 계산 및 조사 결과에 의하면 접합면의 응력이 압축상태를 유지하기 위해서는 각 대기 습도마다 일정값 이상의 보수층 두께와 습윤처리 시간이 필요함을 알 수 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.67-71
• /
• 2008

The study analyzed on fire resistance of high strength concrete followed by thickness of fireproof plaster board and change of adhesive method. In spalling characteristics after fire resistance test, all four-side covering concretes were left out of testing screens. Thus, serious spalling was happened by exposing their internal reinforcing rods. in partial testing screens, spalling was happened till the internal concrete of main reinforcing rod. Only, temperature history didn't have special differences among changes of adhesive method. However, thickness of fireproof plaster board is very important. Namely, mock member reinforcing 25mm general adhesive + Bending was 583℃ in the highest temperature of surface part and 479℃ in the highest temperature of the main reinforcing rod, which was relatively good temperature history.

• 센서학회지
• /
• 제24권3호
• /
• pp.208-213
• /
• 2015

The purpose of this study is to optimize the design of a capacitive pressure sensor element using the simulation of electrical characteristics. The simulation of the ceramic sensor diaphragm ($Al_2O_3$) was performed by permitting pressure to change the curvature of the diaphragm. The pressure capacitance ($C_P$) was increased from 19.63 pF to 15.26 pF by applying pressure because the distance between the electrodes has been changed from $30{\mu}m$ to $15{\mu}m$. When the thickness of the diaphragm was changed to 0.46~0.52 mm, a larger capacitance change showed in accordance with the reduced thickness, which means an increase of sensitivity. However, considering the viewpoint of the signal linearity, it was selected for the optimum thickness of the diaphragm to 0.50 mm. The designed sensor element based on simulated results was tested to measure the output characteristics. Comparing of simulated and measured results, there was a margin of error of approximately 2%.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.151-157
• /
• 1995

Frequency-dependent electrical properties of $C_{22}$-Quinolinium(TCNQ) LB films were investigated in a frequency range of 10[Hz]-13[MHz] along a perpendicular direction. The films were heat-treated to understand an electrodynamic response in a temperature range of 20-240[.deg. C]. Frequencydependent dielectric constants show that there are two characteristic dispersions; one is a dispersion occuring near 1[MHz] coming from the orientational polarization of the molecules and the other one is an interfacial polarization effect below 1[kHz] or so when the annealing temperature is above 80 [.deg. C]. The overall frequency-dependent dielectric constant is higher near 80[.deg. C]. It may be due to a softness of the alkyl chains. Several other methods were employed to identify the internal structure change of the films. DSC(differential scanning calorimetry) data of the $C_{22}$-Quinolinium(TCNQ) molecules shows that there is an endothermic process near 110[.deg. C] and a weak exothermic process near 180[.deg. C]. While the endothermic process is related to a disordering of the alkyl chains, the exothermic process seems to be due to a chemical structure change of the TCNQ molecules. Thickness measurement by ellipsometry shows that there is a thickness drop near 100[.deg. C], and the thickness above 120[.deg. C] becomes around 20[%] of the room-temperature value.lue.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.176-179
• /
• 2009

Injection molding is one of the most general manufacturing processes of polymers. The deformation of final molded parts occurs because of the change of temperature and pressure during injection molding process. The deformation of injection molded parts depends on many operational conditions, such as, melt temperature, injection speed, mold temperature, packing pressure, and the structure of mold. In the present paper, injection molding experiments were performed to find the process conditions to affect the average shrinkage in thickness direction and the replication ratio of fine patterns on the surface for the final injection-molded LGP samples. As a results, in the cases of PC(Polycarbonate), when the melt temperature was under $285^{\circ}C$, both average shrinkage and replication ratios were mainly influenced by packing pressure. However, the replication ratio was more influenced by melt temperature than packing pressure for the cases of higher melt temperature.