• Food Science and Preservation
• /
• v.13 no.5
• /
• pp.538-542
• /
• 2006

Physicochemical properties and positional distribution of Hallabong Tangor (Citrus Kiyomi ${\times}$ ponkan) cultivated in heated greenhouse were investigated. About 90% of Hallabong produce fruit within the range of $250{\sim}400g$ fruit weight on a tree, larger fruits were mainly consisted of $400{\sim}450g$ in M16A, a variant species of Hallabong, due to younger tree and fruit thinning. Nevertheless fruit sizes of M16A were larger than Hallabong, and peel thickness of M16A (3.29 mm) was thinner than that of Hallabong (3.51 mm). Hardness of m6h was 994.69g-force, compared to 832.8 g-force of Hallabong on the average. Soluble solids and acid content of Hallabong were $12.20{\sim}12.98^{\circ}Brix$ and $1.08{\sim}1.14%$, while those of M16A were $1.48{\sim}12.63^{\circ}Brix$ and $0.92{\sim}1.00%$, respectively. Vitamin C content of Hallabong was $71.30{\sim}78.77 mg/100 g$, compared to $64.40{\sim}68.01mg/100g$ in M16A. Soluble solid in the part of stem was lower than that of end part among the same segment. Fruit size in the upper part of the tree was larger, the peel was thicket and flesh ratio was lower than the middle or lower part. However, soluble solids and acid content were high, due to cumulative sunshine during cultivation.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.4
• /
• pp.37-44
• /
• 2008

To design the cockpit of Korean helicopter, anthropometric data for Korean helicopter pilots as a target population is necessary. The present study measured the body sizes of Korean helicopter pilots to design the cockpit of Korean helicopter, and compared the measurements with those of Korean civilian and the US Army. The sample size was 100 which determined by a statistical analysis. Anthropometric measurements were collected for 100 samples (male = 94, female = 6; age group = 20~40) of Korean helicopter pilots by applying standard measurement protocol. To compare three anthropometric data, Korean civilian and US Army data were controlled by considering age group (20~40) and gender ratio (male: female = 9:1) of Korean helicopter pilots. The average body sizes of Korean helicopter pilots were mostly similar to those of Korean civilian, however, lower limb related variables (hip breadth, popliteal height and thigh clearance) and shoulder-to-elbow length were significantly greater (1~7%) at α=0.05. Furthermore, the average body sizes for Korean helicopter pilots regarding lower limb length and thickness were significantly smaller than those of the US Army (1~12%); however, the average body sizes for Korean helicopter pilots regarding upper body related variables (sitting height, sitting eye height, and acromial height) and hip breadth were significantly greater (0.7~1.9%). Lastly, size variability for Korean helicopter pilots was significantly smaller than those of Korean civilian and the US Army. Anthropometric data for Korean helicopter pilots of the present study was applied to design and evaluate a Korean helicopter cockpit.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.216-222
• /
• 2012

We synthesized microcapsule absorbent with crosslinked poly(styrene-$alt$-maleic anhydride) (PSMA) as a core and PSMA as a shell by a precipitation polymerization method for the delayed absorption of excess water in cement mortar. cPSMA-PSMAs with core-shell structure were synthesized with ratios of 1/1, 1/2 and 1/3 as core monomer mass to shell monomer mass to control shell thickness. We observed the hydrolysis of PSMA in cement-saturated aqueous solution by a FTIR spectrometer. We observed good core-shell structure microcapsules for 1/2(cPSMA #3), but observed incomplete core-shell structure for 1/1(cPSMA #2) and 1/3(cPSMA #4) of core/shell monomer ratios. The swelling ratio of cPSMA #3 in cement-saturated aqueous solution was increased until 20 min. After that it was decreased until 2 hrs swelling time, and they started to increase again. The viscosities of cement paste with cPSMA #3 microcapsules were very slowly increased until 1 hr and increased fast after 1.5 hrs. Cement mortar with 0.5 wt% cPSMA #1 having only core part showed about 5% increase in compressive strength compared to that of plain cement mortar. cPSMA #3 added cement mortar showed the highest compressive strength with 7% increase.

• Elastomers and Composites
• /
• v.41 no.3
• /
• pp.147-156
• /
• 2006

To investigate the influence of the foaming temperature and carbon black content on the cure behaviors and foaming characteristics of the foams. natural rubber (NR) was foamed at five temperature zones (145, 150, 155, 160 and $165^{\circ}C$) and different feeding ratios of the carbon black. A decreasing trend of the scorch time, $t_{s2}$ and cure time, $t_{90}$ was observed upon increasing foaming temperature and carbon black content. The optimal temperature for vulcanization and foaming of NRs in this study was considered to be $165^{\circ}C$ where density of the loomed NRs is lower than those at other four temperature regions. The rule rate index of the NRs foamed at $145^{\circ}C$ is smaller than those at 150, 155, 160 and $165^{\circ}C$. The results of the expansion ratio and micrographs of the foamed NRs were founded to support the density characteristics. The thickness of each of the struts formed inside the rubber matrix decreases with increasing the foaming temperature, while it increases with increasing the carbon black content.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.299-308
• /
• 2002

We have derived an analytical expression for the sensitivity of the frequency domain small-loop electromagnetic (EM) surveys over a two-layer earth in order to estimate the depth of investigation with an instrument having the source-receiver separation of about 2 m. We analyzed the sensitivities to the lower layer normalized by those to the upper half-space and estimated the depth of investigation from the sensitivity analyses and the mutual impedance ratio. The computational results showed that the in-phase components of the sensitivity to the lower layer dominates those to the upper layer when the thickness of the upper layer is less than 20 m, while the quadrature components are not sensitive to the lower layer over the entire frequency range. Hence we confirmed that the accurate measurement of the in-phase component is essential to increase the depth of investigation in the multi-frequency small-loop EM survey. When conductive basement of 10 ohm-m underlies the upper layer of 100 ohm-m, an accurate measurement of the in-phase components ensures the depth of the investigation more than 10 m even accounting a noise effect, from which we conclude that the small-loop EM survey is quite effective in imaging the conductive plume down to a considerable depth. On the other hand, in the presence of the resistive basement of 1,000 ohm-m, the depth of investigation may not exceed 5 m considering the instrumental accuracy, which implies that the application of the small-loop EM survey is not recommended over the resistive environment other than detecting the buried conductor.

• Journal of the Korean Vacuum Society
• /
• v.20 no.2
• /
• pp.77-85
• /
• 2011

The silicon-germanium (SiGe) alloy, which is compatible with silicon semiconductor technology and has a smaller band gap and a lower thermal conductivity than silicon, has been used to fabricate electronic devices such as transistors, photodetectors, solar cells, and thermoelectric devices. This paper reviews the application of SiGe alloys to electronic devices and related technical issues. Since the SiGe alloy comprises germanium whose band gap is smaller than silicon, its band gap is also smaller than that of silicon irrespective of the ratio of silicon to germanium. This narrow band gap of SiGe enables the base thickness of bipolar transistors to decrease without a loss in current gain so that it is possible to improve the speed of bipolar transistors by adopting the SiGe-base. In addition, the conversion efficiency of solar cells is enhanced by the absorption of long-wavelength light in the SiGe absorption layer. Phonon scattering caused by the irregular distribution of alloying elements induces the lower thermal conductivity of SiGe than those of pure silicon and germanium. Because a thin film layer with a low thermal conductivity suppresses thermal conduction through a thermal sink, the SiGe alloy is considered to be a promising material for silicon-based thermoelectric systems.

• Food Science and Preservation
• /
• v.10 no.2
• /
• pp.125-130
• /
• 2003

This study was carried out to investigate the thermo-physical properties and design Freezing time prediction model from data of freezing test of Kimchi. Density of Kimchi were measured as 1001.9 ${\pm}$0.03 kg/㎥ at unfrozen state, 987.0 ${\pm}$0.07 kg/㎥ at frozen state and volume of the Kimchi expanded 4.67% at -l5$^{\circ}C$. Initial freezing point of Kimchi and seasoning were -4.0$^{\circ}C$ and -2.5$^{\circ}C$, respectively. Freezing ratio of Kimchi were estimated more than 50％ at -5.0$^{\circ}C$, more than 75% at -l0$^{\circ}C$ and approximately 90% at -25$^{\circ}C$. To obtain equation for freezing time prediction of Kimchi, freezing time(Y) was regressed against the reciprocal( $X_3$) of difference of initial freezing point and freezing medium temperature, reciprocal( $X_4$) of surface heat transfer coefficient, the initial temperature( $X_1$) and thickness( $X_2$) of samples. As results of the multiple regression analysis, equations were obtained as follows. Y$_{kimchi}$=3.856 $X_1$+13982.8 $X_2$+8305.166 $X_3$+ 3559.181 $X_4$-639.189( $R^2$=0.9632). These equations shown better results than previous models, and the accuracy of its was very high as average absolute difference of about 10% in the difference between the fitted and experimental results.

• Food Science and Preservation
• /
• v.16 no.5
• /
• pp.699-704
• /
• 2009

Commercially produced 'baby leaves' of Brassica campestris var. narinosa (Chinese cabbage) were used in the present study. Baby leaf vegetables were sown on 128 cell plug trays and harvested 30 days after sowing. For mechanical stress experiments, seedlings were thinned to three per cell, selected for uniformity, and watered at the base. Trays were treated with mechanical stress by stroking back and forth 50 times, using a sheet of A4 paper folded to double thickness. Plants were treated between 12:00 and 14:00 daily for 15-20 days. Harvested baby leaf vegetables were packed in MAP salad bags made of P-plus film, $50{\mu}m$ polypropylene (PP) film, and polyethylene terephthalate (PET) boxes. Fresh weight was well-maintained under P-plus and PP film on storage at $8^{\circ}C$. However, loss of fresh weight occurred quickly in PET boxes, and vegetable quality deteriorated rapidly. Stressed leaves were smaller but thicker, with an increased dry weight ratio. We thus suggest that P-plus or PP film is most appropriate packing for marketing of baby leaf vegetables, which should be stored at $8^{\circ}C$. Our data on baby leaf vegetables also make a significant new contribution in that we demonstrate a positive effect of stress touching on baby leaf processability.

• Journal of Life Science
• /
• v.17 no.11
• /
• pp.1505-1510
• /
• 2007

We found 8 single nucleotide polymorphisms (SNPs) in adipocyte fatty acid bonding protein (FABP4) gene as candidate gene of FAT1 locus on pig chromosome 4. With over 800 heads of major commercial pig breeds including Duroc, Landrace, Berkshire and Yorkshire, we analyzed SNPs of FABP4 gene to determine possible effects of FABP4 genotype to economically important traits. $400{\sim}800\;bp$ amplicons in FABP4 gene were used PCR-RFLP for each SNPs and we found that the frequency of some SNPs of this gene was different among the breeds. According to the statistical analyses to determine possible associations of each genotype with economic traits, it was found that subgroup with different genotypes showed significant differences in daily gain, backfat thickness, lean percentage and feed conversion ratio (P<0.05). Thus, as a Part of enhancing the selection competence related to swine growth rate and lean percentage, it is expected that FABP4 gene markers verified in this study will be useful to use for Korean commercial pig industry.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.145-151
• /
• 2016

In response to the cavitation caused by the partial vacuum caused by the fluid flow, a paint was developed by dispersing the lamella-shaped glass-flake in resin for anti-cavitation. This composite paint was developed by using the inorganic filler (lamella shaped glass-flake) and the NBR (Acrylonitrile-butadiene rubber) which was modified epoxy resin. Especially, the glass-flake was a thin film with a thickness of about 100~200 nm and length of about $20{\sim}30{\mu}m$, the aspect ratio was about 200 to 300 times that of the plate-shaped. So the paint for anti-cavitation have shown excellent performance in corrosion resistance. The results of evaluating anti-cavitation performance was below, tensile strength $4.8{\sim}6N/mm^2$ or more, rupture elongation 30% or higher, abrasive speed $10mm^2/h$ or less. In particular, it showed more than twice the superior performance compared to existing advanced foreign products in anti-cavitation performance evaluation.