• Elastomers and Composites
• /
• 제53권1호
• /
• pp.6-12
• /
• 2018

Styrene-butadiene Rubber (SBR) Latex composites, incorporated with cellulose/starch-silica hybrids synthesized by gel-adsorption method, were filled into rubber by the latex compounding method. The structure morphology, mechanical properties, and thermodynamic properties of gel-silica hybrids were characterized. The states of hybrids which used as fillers were also characterized by SEM. As the fillers ratio increased, the difference for storage modulus of samples had been morphology by rubber process analyzer (RPA). Then, as more fillers ratio was filled into the matrix, the best tensile strength result, and the largest modulus value were also proved by UTM and RPA. As for thermal stability, increase in the ratio of fillers led to higher initial decomposition temperature, which was also proved by TGA. The swelling ratio of samples has also been characterized. From the results of all the tests, cellulose-silica hybrid showed the best results as a filler, and the best filling ratio of this hybrid is about 10 phr, which has the best storage modulus and great tensile strength.

• 공업화학
• /
• 제28권6호
• /
• pp.691-695
• /
• 2017

본 연구에서는 알카라인 연료전지 환원극 가스확산층에 내열화학성이 우수한 초발수 성능을 부여하기 위하여 PDMS 코팅 공정을 최적화하였다. 성격이 상이한 두 개의 상용 가스확산층을 선택하였으며, 소재의 열적 안정성을 검토하여 코팅 온도를 최적화하고, PDMS 점도를 제어하여 코팅 균일성을 확보하고자 하였다. PDMS 전구체의 점도와 관계없이 $200^{\circ}C$ 부근에서 코팅하게 되면 모든 확산층 표면에서 높은 초발수 성능을 나타내었다. 가혹실험 조건에서 초발수 성능변화를 측정한 결과 1000 CS PDMS를 이용하여 28BC 가스확산층에 코팅한 경우가 가장 높은 내구성을 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.909-911
• /
• 1999

Metalization technology of the fine patterns by electroless plating is required in place of electrodeposition as high-density printed circuit boards (PCB) become indispensable with the miniaturization of electronic components. Electroless nickel plating is a suitable diffusion barrier between conductor metals, such as Al and Cu, and solder is essetional in electronic packaging in order to sustain a long period of service. Moreover, Electroless nickel has particular characteristics including non-magnetic property, amorphous structure, wear resistance, corrosion protection and thermal stability. In this study fundamental aspects of electroless nickel deposition were studied with effect of complexeing agents of different kinds. Then, the property of electroless deposit are controlled by the composition of the deposition solution, the deposition condition such as temperature and pH value and so on. the characteristics of the deposits has been carried out.

• 한국강구조학회 논문집
• /
• 제19권1호
• /
• pp.87-98
• /
• 2007

일반적으로 가교량은 주형와 강재교각이 강결 연결된 강재 라멘구조를 형성하고 있다. 강재 라멘구조의 경우, 작용하는 하중에 의해 축력 및 휨을 받는 부재/축력 및 휨을 동시에 받는 부재가 발생한다. 본 연구에서는 이러한 부재에 대해서 시스템 좌굴해석을 통하여 가교량 주요부재의 유효길이를 산정하고 이를 이용하여 안정성 해석을 수행한다. 이를 위하여 실제 설계/시공될 수 있는 가교의 6가지 유형을 선택하고, 고정하중, 온도하중 그리고, 활하중조합에 대한 3차원 좌굴설계를 실시한다. 결과적으로 6가지 가교에 대한 사례연구를 통하여 주형 및 교각부의 유효길이 산정법, 3차원 좌굴모드에 대한 고찰, 그리고 2차해석의 효용을 조사한다.

• 한국진공학회지
• /
• 제14권3호
• /
• pp.159-164
• /
• 2005

Indium tin oxide (ITO) films were deposited on a glass slide at a thickness of 280 nm by radio frequency(rf) magnetron sputtering from a ceramic target composed of $In_2O_3\;(90\%)\;+\;SnO_2\;(10\%)$. We investigated the effects of the annealing temperature (Ta) between 200 and 350'E for 30 min in air on such properties as thermal stability, surface morphology, and crystal structure of the films. X-ray diffraction spectra revealed that all the films were oriented preferably with [222] direction and [440] direction and the peak intensity increased with increasing annealing temperature. X-ray photoelectron spectroscopy (XPS) showed that the sodium was out-diffused from the glass substrate at the annealing temperature of $350^{\circ}C$. The sodium composition of the ITO film amlealed at $350^{\circ}C\;for\;30\;min\;was\;2.5\%$ at the surface. Also the sodium peak almost disappeared after 3 keV $Ar^+$sputtering for 6 min. The visible transmittance of all ITO films was over $77\%$.

• 한국재료학회지
• /
• 제27권3호
• /
• pp.155-160
• /
• 2017

Doped-$LaCrO_3$ perovskites, because of their good electrical conductivity and thermal stability in oxidizing and/or reducing environments, are used in high temperature solid oxide fuel cells as a gas-tight and electrically conductive interconnection layer. In this study, perovskite $(La_{0.8}Ca_{0.2})(Cr_{0.9}Co_{0.1})O_3$ (LCCC) coatings manufactured by atmospheric plasma spraying followed by heat treatment at $1200^{\circ}C$ have been investigated in terms of microstructural defects, gas tightness and electrical conductivity. The plasma-sprayed LCCC coating formed an inhomogeneous layered structure after the successive deposition of fully-melted liquid droplets and/or partially-melted droplets. Micro-sized defects including unfilled pores, intersplat pores and micro-cracks in the plasma-sprayed LCCC coating were connected together and allowed substantial amounts gas to pass through the coating. Subsequent heat treatment at $1200^{\circ}C$ formed a homogeneous granule microstructure with a small number of isolated pores, providing a substantial improvement in the gas-tightness of the LCCC coating. The electrical conductivity of the LCCC coating was consequently enhanced due to the complete elimination of inter-splat pores and micro-cracks, and reached 53 S/cm at $900^{\circ}C$.

• 한국항공우주학회지
• /
• 제30권1호
• /
• pp.56-64
• /
• 2002

본 논문에서는 복합재료 얇은 벽보의 열진동 응답에 대해 연구하였다. 복합재료 얇은 벽보로 모델링한 위성체 유연 구조물은 회전관성과 1차, 2차 와핑. 전단변형의 비고전적 요소를 포함한다. CUS구조물로 모델링한 복합재료 얇은 벽보의 열진동 특성은 적층순서와 섬유강화복합재료의 방향특성인자로부터 기인된 종방향 굽힘과 횡방향 굽힘이 연성과 관련하여 연구되었다. 열에 의한 구조물의 변형과 온도 구배가 연성된 열 진동에 대한 해석이 수행되었다.

• Macromolecular Research
• /
• 제14권1호
• /
• pp.1-33
• /
• 2006

Polyimides (PIs) exhibit excellent thermal stability, mechanical, dielectric, and chemical resistance properties due to their heterocyclic imide rings and aromatic rings on the backbone. Due to these advantageous properties, PIs have found diverse applications in industry. Most PIs are insoluble because of the nature of the high chemical resistance. Thus, they are generally used as a soluble precursor polymer, which forms complexes with solvent molecules, and then finally converts to the corresponding polyimides via imidization reaction. This complexation with solvent has caused severe difficulty in the characterization of the precursor polymers. However, significant progress has recently been made on the detailed characterization of PI precursors and their imidization reaction. On the other hand, much research effort has been exerted to reduce the dielectric constant of PIs, as demanded in the microelectronics industry, through chemical modifications, as well as to develop high performance, light-emitting PIs and liquid crystal (LC) alignment layer PIs with both rubbing and rubbing-free processibility, which are desired in the flat-panel display industry. This article reviews this recent research progresses in characterizing PIs and their precursors and in developing low dielectric constant, light-emitting, and LC alignment layer PIs.

• 폴리머
• /
• 제31권5호
• /
• pp.436-441
• /
• 2007

In this work, the multiwalled carbon nanotubes(MWNTs) were functionalized with sodium dodecylbenzene sulfonate(SDBS) and then MWNTs/Lyocell composite fibers were prepared. The properties of MWNTs, the functionlization on the surface of MWNTs and their dispersion in the cellulose matrix were characterized by TEM, SEM, WAXD and FT-IR. The results showed that SDBS has been coated successfully onto the surface of the MWNTs by functionlization. This can improve effectively the dispersion uniformity of MWNTs in NMMO aqueous solution and is helpful to prepare a spinnable spinning dope. Moreover, the resultant MWNTs/Lyocell composite fibers still have cellulose II crystal structure, and their tensile strength and initial modulus increased with the increasing draw ratio and reached the optimal value with adding 1 wt% MWNTs. The thermal stability of the composite fiber was also improved by the addition of the MWNTs.

• Macromolecular Research
• /
• 제17권9호
• /
• pp.638-645
• /
• 2009

We report the effect of the amount of the mesoporous material, SBA-15, on the basic traits of fully aliphatic polyimides (API). For this purpose, water soluble, fully aliphatic poly(amic acid) triethyl amine salts ($PAA_{(s)}$) were prepared and mixed with various amounts of SBA-15. Fully aliphatic polyimide hybrid composites containing the SBA 15-type mesoporous silica were synthesized successfully from bicyclo [2.2.2] oct-7-ene-2,3,5,6-tetracarboxylic dianhydride and alicyclic diamine, 4,4'-methylene bis(2-methylcyclohexylamine). The structure of the hybrid composites was confirmed by IR spectroscopic analysis. Scanning electron microscopy revealed the morphology of the compounds. The hybrid composites exhibited good thermal stability, reasonable transparency, and a low dielectric constant.