• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.954-962
• /
• 1996

Four kind of polysilanes which had side chains of methyl, phenyl, and mixed structures, were synthesized and modified by doping with iodine. The structural, thermal, and electric characteristics of obtained polymers were systematically observed with iodine, The structural, thermal, and electric characteristics of obtained polymers were systematically observed with FT-IR, UV/VIS, TGA/DTG, DSC, and measurement of electric conductivity. From FT-IR spectra, it was confirmed that the synthesized polysilanes had side chains of methyl, phenyl, and mixed structures. The thermal stabilities of the polymers were found to increase with phenyl substituents. The polysilanes with phenyl side groups showed ${\sigma}-{\sigma}*$ transition absorption at wavelengths longer than 350 nm. The bathochromic shift of polysilanes with phenyl substituents relates probably to the narrowed band gap caused by delocalization of ${\pi}$-electron. The polymers doped with iodine showed multi-step pyrolysis behavior and higher residue compared with that of the undoped polymers. The electric conductivities of the undoped and doped polysilanes were $10^{-5}S/cm$ and $10^{-4}S/cm$, respectively.

• Food Science and Preservation
• /
• v.21 no.3
• /
• pp.427-433
• /
• 2014

Ethanol and hot water extracts were prepared from Lindera obtusiloba Blume (LO) and Zanthoxylum piperitum DC (ZP) and used to evaluate their antimicrobial activities and thermal stability against six foodborne pathogens (3 gram-positive and 3 gram-negative bacteria). The antimicrobial activities were assessed using the agar diffusion method, and the thermal stabilities of extracts were examined after heat treatment at 60, 70, 80, and $100^{\circ}C$ for 10 min. The zones of inhibition by the LO extract or the ZP extract of the tested microorganisms were in the range of 21-30 mm and 19-25 mm, respectively, at 100 mg/mL concentrations. The 60% ethanol extract and the hot water extracts from LO showed the strongest antimicrobial effects against MRSA and Staphylococcus aurues, respectively. For the extract from ZP, the strongest antimicrobial effect was shown against S. aurues by 60% ethanol, and the weakest antimicrobial effect was shown against E. coli by the hot water extracts. The ZP extracts showed that the gram-positive bacteria were more sensitive than gram-negative bacteria. For the thermal stability of the extracts, the antimicrobial effects stabilized after heat treatment. Overall, the data suggest that the extracts have a potential for application in various food products for which a natural antimicrobial additive is desired.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.83-90
• /
• 1998

Stage transformation characteristics of Li, K and Na-graphite deintercalation compounds (GDICs) were studied under consideration of a deintercalation mechanism of the intercalants between carbon layers. Li-graphite intercalation compounds (GICs) synthesized by a controlling temperatures and pressures have been spontaneously decomposed in the atmosphere. By X-ray differaction analysis the $d_{001}$-values of stage 1 and 2 were identified to be 3.71 and 7.06 $\AA$, respectively. After 6 weeks, the deintercalation reaction of the Li-GICs ceased and only residual compounds could be observed. K-GICs were synthesized by the modified two-bulb method resulting in structural stabilities and stage transitions. By X-ray diffraction analysis the very stable K-graphite residue compounds were observed after 10 weeks. Na-GICs with stage 1 and 2 were synthesized using the high temperature and pressure technique. The temperature dependence of a deintercalation reaction and a thermal stability of Na-GICs were discussed. The structure changes of the Na-GDICs depending on heating rates were identified by X-ray diffraction. According to the deintercalation process, the stage transformations could be attributed to irregular deintercalations of the GDICs with disordered stage.

• BMB Reports
• /
• v.40 no.4
• /
• pp.539-546
• /
• 2007

The lysozymes encoded by bacteriophage T7 and K11 are both bifunctional enzymes sharing an extensive sequence homology (75%). The constructions of chimeric lysozymes were carried out by swapping the N-terminal and C-terminal domains between phage T7 and K11 lysozymes. This technique generated two chimeras, T7K11-lysozyme (N-terminal T7 domain and C-terminal K11 domain) and K11T7-lysozyme (N-terminal K11 domain and C-terminal T7 domain), which are both enzymatically active. The amidase activity of T7K11-lysozyme is comparable with the parental enzymes while K11T7-lysozyme exhibits an activity that is approximately 45% greater than the wild-type lysozymes. Moreover, these chimeric constructs have optimum pH of 7.2-7.4 similar to the parental lysozymes but exhibit greater thermal stabilities. On the other hand, the chimeras inhibit transcription comparable with the parental lysozymes depending on the source of their N-terminals. Taken together, our results indicated that domain swapping technique localizes the N-terminal region as the domain responsible for the transcription inhibition specificity of the wild type T7 and K11 lysozymes. Furthermore, we were able to develop a simple and rapid purification scheme in purifying both the wild-type and chimeric lysozymes.

• Journal of the Korean Vacuum Society
• /
• v.15 no.5
• /
• pp.499-505
• /
• 2006

Field emission of GaN and GaP nanowires, synthesized by thermal chemical vapor deposition, and their emission stabilities under oxygen and argon environments were investigated. The field emission current of GaN nanowires was seriously deteriorated under oxygen environment, while that of GaP was not. Both wires did not show any noticeable change under argon environment. The existence of oxide outer shell layers in the GaP nanowires was proposed to be a main reason for this emission stability behavior. Field emission energy distributions of electrons from these nanowires revealed that field emission mechanism of the semiconductor nanowires were different from that of carbon nanotubes.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1777-1783
• /
• 2014

Four $Cd^{II}$ MOFs, $[Cd_2({\mu}-succinate)_2(H_2O)_2]{\cdot}H_2O$ (1A), $[Cd_2({\mu}-succinate)_2({\mu}-4,4^{\prime}-bpy)_2]{\cdot}H_2O$ (1B), $[\{Cd_2({\mu}-succinate)_2\}({\mu}-bpa)_2\{Cd(H_2O)_2\}(NO_3)_2]{\cdot}H_2O$ (2), and $[Cd({\mu}-succinate)({\mu}-bpp)_2]{\cdot}2H_2O$ (3), with various bipyridyl ligands (4,4'-bipyridine (4,4'-bpy), 1,2-bis(4-pyridyl)ethane (bpa), and 1,3-bis(4-pyridyl)propane (bpp)) were prepared, and their structures were determined using X-ray crystallography. The structures and dimensionalities of $Cd^{II}$-(succinate) compounds varied depending on the auxiliary ligands. Heterogeneous catalytic activity for transesterification reactions, photoluminescence and the thermal stabilities of these compounds were also examined.

• Journal of the Korean Chemical Society
• /
• v.38 no.4
• /
• pp.276-282
• /
• 1994

Perovskite-type mixed oxides LaBO$_3$(B = Mn, Fe, Co) were prepared by citrate sol-gel method in $air(850^{\circ}C$, 24h). The oxygen stoichiometries and structures of these oxides were determined by XRD and TPR results as followings; LaMnO$_{3.16}$(a = 5.507, c = 13.329 $\AA$, hexagonal), LaFeO$_{3.17}$(a = 5.554, b = 5.555, c = 7.863 $\AA$, orthorhomibic), LaCoO$_{3.0}$(a = 5.436, c = 13.095 $\AA$, hexagonal). The temperature programmed reduction(TPR) experiments in static 300 torr H$_2$ atmosphere shows that the reduction reaction of LaBO$_3$(B = Mn, Fe, Co) proceeds into two stages, and thermal stabilities of these oxides decreased in the order of LaMnO$_3$ > LaFeO$_3$ > LaCoO$_3$. According to the kinetic analysis the lowest activation energy was obtained for LaCoO$_3$.

• Applied Chemistry for Engineering
• /
• v.20 no.1
• /
• pp.40-45
• /
• 2009

N-Alkylcarbazole-3-vinylene-2-methyl-4-dicyanomethylene-4H-pyran derivatives were synthesized by dehydration, $S_N2$, Vilsmeier, and Knoevenagel condensation. They are red-emitting materials for organic light emitting device (OLED) composed of electron donor of N-alkylcabazole-3-vinylene groups and electron acceptor of 2-methyl-4-dicyanomethylene-4H-pyran groups by a conjugated structure. The structural properties of reaction products were analyzed FT-IR and $^1H-NMR$ spectroscopy. The thermal stabilities and reactivities were measured by melting points and yields. The UV-visibles and PL properties can be determined by exitation spectra and emission spectra, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.281-281
• /
• 2014

The field emission properties of GaN are reported in the present study. To be a good field emitter, it requires a low work function, high aspect ratio, and strong mechanical stability. In the case of GaN, it has a quite low work function (4.1eV) and strong chemical/mechanical/thermal stabilities. However, so far, it was difficult to fabricate vertical GaN nanostructures with a high aspect ratio. In this study, we successfully achieved vertically well aligned GaN nanostructures with chemical vapor-phase etching methods [1] (Fig. 1). In this method, we chemically etched the GaN film using hydrogen chloride and ammonia gases at high temperature around $900^{\circ}C$. This process effectively forms vertical nanostructures without patterning procedure. This favorable shape of GaN nanostructures for electron emitting results in excellent field emission properties such as a low turn-on field and long term stability. In addition, we observed a uniform fluorescence image from a phosphor film attached at the anode part. The turn-on field for the GaN nanostructures is found to be about $0.8V/{\mu}m$ at current density of $20{\mu}A$/cm^2. This value is even lower than that of typical carbon nanotubes ($1V/{\mu}m$). Moreover, threshold field is $1.8V/{\mu}m$ at current density of $1mA$/cm^2. The GaN nanostructures achieved a high current density within a small applied field range. We believe that our chemically etched vertical nanostructures are the promising structures for various field emitting devices.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.429-435
• /
• 2003

Vinyl addition copolymerizations of norbornene (NB) and 5-vinyl-2-norbomene (VNB) were carried out using a cationic η$^3$-allyl palladium catalyst in the various mole ratio of comonomers. The copolymers could be obtained in good yield (65∼85%) with high weight-average molecular weights (M$_{w}$ > 760,000). Depending on increasing VNB contents, the molecular weight and yield of the copolymers decreased. FT-IR analysis confirmed that actual contents of VNB in polymer were proportional to the feeding content of VNB. From $^1$H-NMR spectroscopy, we found that both exo and endo VNB isomer were copolymerized with NB. Thermal stabilities of NB-VNB copolymers were independent on the VNB content and their initial decomposition temperatures were about 300 C. The NB-VNB copolymers were followed by epoxidation by using m-CPBA and hydroxylation by 9-BBN, respectively, and these post-polymers were characterized by FT-IR spectroscopy and $^1$H-NMR analysis..