• 마이크로전자및패키징학회지
• /
• 제28권2호
• /
• pp.51-57
• /
• 2021

이 연구에서는 에폭시 수지에 포함된 나노 실리카 입자의 농도가 재료의 열/기계적 물성에 미치는 영향에 대해 알아보았다. 약 12 nm 크기의 나노 입자를 에폭시 수지에 다섯가지 무게비로 섞은 나노복합소재를 제작하였다. DMA와 TMA 방법을 이용하여 유리전이온도, 응력이완, 열팽창 거동을 측정하였다. 이를 통해 나노입자가 재료의 점탄성 거동에 어떠한 영향을 미치는지 보였다. 실리카 입자의 함량이 증가할수록 순수 에폭시 재료 대비 탄성 물성은 증가하였고, 유리전이온도는 감소하였다. FTIR 결과는 분자구조의 관점에서 충진제 함량에 따른 물성변화의 원인을 찾고 나노입자가 에폭시 분자 구조에 어떠한 영향을 미치는지를 규명하는데 중요한 역할을 하였다.

• 공업화학
• /
• 제22권2호
• /
• pp.149-154
• /
• 2011

연료전지 스택 작동환경에서의 열노화 특성을 살펴보기 위하여 다양한 고무 compound의 내열 및 압축 영구 줄음률의 평가를 실시하고, 스택의 장시간 운전을 통해 접합할 수 있는 대상액인 $H_2SO_4$, $H_2O$, LLC (Ethylene glycol : $H_2O=50:50$)에 대하여 장시간 평가를 실시하였다. NBR과 EPDM은 시간이 경과할수록 침적액의 변색하는 것을 알 수 있었으며, VMQ는 $H_2SO_4$ 분위기에서 시간에 따라 고무가 노화되는 것을 TGA, SEM, EDS 분석을 통하여 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제15권5호
• /
• pp.341-346
• /
• 1994

The frameworks of $(Cu(NH_3)_3OH^+)_x(NH_4^+)_{12-x}-A{\cdot} zH_2O$ which were prepared by the ion-exchange of zeolite A with ammoniac cupric nitrate solution are more stable than those of $Cu_xNa_{12-2x} -A$ obtained by the ion exchange with aqueous cupric nitrate solution are more stable than those of $Cu_xNa_{12-2x} -A$ obtained by the ion exchange with aqueous cupric nitrate solution. An energetic calculation was made on the relatively stable $(CuOH^+)_2(NH_4^+)_{10}-A{\cdot} 2H_2O$ prepared by the partial evacuation of $(Cu(NH_3)_3OH^+)_2(NH_4^+)_{10}-A{\cdot} zH_2O$. The mean stabilization energies of water, OH-, and $NH_4^+$ ions are -30.23 kcal/mol, -60.24 kcal/mol, and -16.65 kcal/mol, respectively. The results of calculation were discussed in terms of framework stability. The $(Cu(NH_3)_3OH^+)_2(NH_4^+)_{10}-A{\cdot} zH_2O$ zeolite shows two step deammoniation reactions. The first deammoniation around 210 $^{\circ}$C (third DSC peak) was attributed to the decomposition of $[Cu(NH_3)_3OH^+]$ ion and the second one around 380 $^{\circ}$C (fourth DSC peak) was ascribed to the decomposition of $NH_4^+$ ion. The activation energies of the first and second deammoniation reactions were 99.75 kJ/mol and 176.57 kJ/mol, respectively.

• 대한금속재료학회지
• /
• 제48권2호
• /
• pp.133-140
• /
• 2010

10 nm thick Ni layers were deposited on 200 nm $SiO_2/Si$ substrates using an e-beam evaporator. Then, 60 nm or 20 nm thick ${\alpha}$-Si:H layers were grown at low temperature (<$200^{\circ}C$) by a Catalytic-CVD. NiSi layers were already formed instantaneously during Cat-CVD process regardless of the thickness of the $\alpha$-Si. The resulting changes in sheet resistance, microstructure, phase, chemical composition, and surface roughness with the additional rapid thermal annealing up to $500^{\circ}C$ were examined using a four point probe, HRXRD, FE-SEM, TEM, AES, and SPM, respectively. The sheet resistance of the NiSi layer was 12${\Omega}$/□ regardless of the thickness of the ${\alpha}$-Si and kept stable even after the additional annealing process. The thickness of the NiSi layer was 30 nm with excellent uniformity and the surface roughness was maintained under 2 nm after the annealing. Accordingly, our result implies that the low temperature Cat-CVD process with proposed films stack sequence may have more advantages than the conventional CVD process for nano scale NiSi applications.

• 대한금속재료학회지
• /
• 제50권9호
• /
• pp.697-702
• /
• 2012

In this study, unidirectional and plain woven carbon fiber reinforced magnesium matrix composite laminates were fabricated by the liquid pressing infiltration process, and evolutions of the microstructure and compressive strength of the composite laminates under corrosion were investigated by static immersion tests. In the case of the unidirectional composite laminate, the main microstructural damage during immersion appeared as a form of corrosion induced cracks, which were formed at both CF/Mg interfaces and the interfaces between layers. On the otherhand, wrap/fill interface cracks were mainly formed in the plain woven composite laminate, without any cracks at the CF/Mg interface. The formation of these cracks was considered to be associated with internal thermal residual stress, which was generated during cooling after the fabrication process of these materials. As a consequence of the corrosion induced cracks, the thickness of both laminates increased in directions vertical to the fibers with increasing immersion time. With increasing immersion time, the compressive strengths of both composite laminates also decreased continuously. It was found that the plain woven composite laminates have superior corrosion resistance and stability under a corrosive condition than unidirectional laminates.

• Composites Research
• /
• 제35권4호
• /
• pp.255-260
• /
• 2022

소화전 탱크의 경량화는 소방차가 수용할 수 있는 물의 양을 증가시켜 초기 소방 과정에서 물 분무 시간을 늘려 화재로 인한 재산과 인명 피해를 크게 줄일 수 있다. 본 연구에서는 탄소섬유강화폴리머(CFRP) 복합재료를 경량 소화전 탱크의 재료로 적용하는 것을 조사하였다. CFRP 소화전 탱크 제조를 위해 사용되는 수지는 우수한 기계적 물성, 성형성, 치수안정성 등 여러 조건들을 만족시켜야 한다. 위의 조건들을 만족시키는 수지를 찾기 위해 KFR-120V, G-650, HG-3689BT, LSP8020, KRF-1031 등 5가지 수지를 후보로 선정하고 테스트하여 CFRP 소화전 탱크 제조 적합성을 조사였다. 분석 결과 KRF-1031이 소화전 탱크에 가장 적합한 특성을 보였다. 특히, KRF-1031을 이용한 CFRP는 열안정성 및 용출 시험에서 성공적인 결과를 보였다.

• Structural Engineering and Mechanics
• /
• 제80권6호
• /
• pp.701-709
• /
• 2021

The paper aims at improving the understanding and mitigating the effects of tunnel fires that may breakout due to the burning fuel and/or explosion within the tunnel. This study particularly focuses on the behavior of the commonly used horse shoe geometry of tunnel systems. The problem has been obtained using an adequate well-established program incorporating the Lagrangian approach. A transient-thermo-coupled static structural analysis is carried out. The effects of radiation and convection to the outer walls of the tunnel is studied. The paper also presents the impact of the hazard on the structural integrity of the tunnel. A methodology is proposed to study the tunnel fire using a model which uses equivalent steel sheet to represent the presence of reinforcements to improve the computational efficiency with adequate validation. A parametric study has been carried out and the effect of suitable lining property for mitigating the fire hazard is arrived at. Detailed analysis is done for the threshold limits of the properties of the lining material to check if it is acceptable in all aspects for the integrity of the tunnel. The study may prove useful for developing insights for ensuring tunnel fire safety. To conduct such studies experimentally are tremendously costly but are required to gain confidence. But, scaled models, as well as loading and testing conditions, cannot be studied by many trials experimentally as the cost will shoot up sharply. In this context, the results obtained from such computational studies with a feasible variation of various combinations of parameters may act as a set of guidelines to freeze the adequate combination of various parameters to conduct one or two costly experiments for confidence building.

• 한국자기공명학회논문지
• /
• 제26권1호
• /
• pp.10-16
• /
• 2022

The phase transition temperatures of CsCoCl₃·2H₂O crystals are investigated via differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Three endothermic peaks at temperatures of 370 K (=T_C1), 390 K (=T_C2), and 416 K (=T_C3) were observed for phase transitions from CsCoCl₃·2H₂O to CsCoCl₃·1.5H₂O, to CsCoCl₃·H₂O, and then to CsCoCl₃·0.5H₂O, respectively. In addition, the spin-lattice relaxation time T_1ρ in the rotating frame and T₁ in the laboratory frame as well as changes in chemical shifts for ¹H and ¹³³Cs near T_C1 were found to be temperature dependent. Our analyses results indicated that the changes of chemical shifts, T_1ρ, and T₁ are associated with structural phase transitions near temperature T_C1. The changes of chemical shifts, T_1ρ, and T₁ near T_C1 were associated with structural phase transitions, owing to the changes in the symmetry of the structure formed of H₂O and Cs⁺ ions. Consequently, the structural symmetry in CsCoCl₃·2H₂O crystals based on temperature is discussed by the environments of their H and Cs nuclei.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 춘계학술발표회 초록집
• /
• pp.72-72
• /
• 2001

Plasma polymerized thin films have been deposited on Si(lOO) substrates at $25-400^{\circ}C$ using thiophene ($C_4H_4S$) precursor by plasma assisted chemical vapor deposition (PACVD) method for low-dielectric device application. In order to compare physical properties of the as-grown thin films, the effects of the plasma power, gas flow ratio and deposition temperature on the dielectric constant and thermal stability were mainly studied. XRD and TED studies revealed that the as-grown thin films have highly oriented amorphous polymer structure. XPS data showed that the polymerized thin films that grown under different RF power and deposition temperature as well as different gas ratio of $Ar:H_2$ have different stoichiometric ratio of C and S compared with that of monomer, indicating a formation of mixture polymers. Moreover, we also realized that oxygen free and thermally stable polymer thin films could be grown at even $400^{\circ}C$. The results of SEM, AFM and TEM showed that the polymer films with smooth surface and sharp interface could be grown under various deposition conditions. From the electrical property measurements such as I-V and C-V characteristics, the minimum dielectric constant and the best leakage current were obtained to be about 3.22 and $10-11{\;}A/\textrm{cm}^2$, respectively.

• 한국전산구조공학회논문집
• /
• 제35권6호
• /
• pp.351-356
• /
• 2022

본 논문에서는 3차원 엮임 재료의 유체투과율 향상을 목적으로 수치해석 데이터 기반의 물성치 회귀 분석 및 최적설계를 소개한다. 우선 3차원 엮임 재료를 구성하는 와이어 사이의 간격을 결정하는 배율 계수를 매개변수화 하여 다양한 배율 조합을 가지는 수치 모델을 생성하였고, 전산 수치해석을 통해 계산된 각 모델의 체적 탄성계수, 열전도 계수, 유체투과율 데이터를 이용하여 다항식 기반의 회귀 분석을 수행하였다. 이를 사용해서 체적 탄성계수와 유체투과율 사이의 다목적함수 최적설계를 통한 파레토 최적해를 도출하였으며, 두 물성치가 서로 상충 관계에 있음을 확인하였다. 한편 3차원 엮임 재료의 열전달 효율을 높이기 위해서 유체투과율을 최대화 시키는 것을 목적으로 경사도 기반 최적설계를 수행하였고, 제약조건인 체적 탄성계수의 크기별 유체투과율의 변화율을 분석하였다. 그 결과 설계자가 원하는 최소한의 강성을 가지는 최대 유체투과율 설계 모델을 얻어낼 수 있음을 확인하였으며, 회귀 방정식을 통해서 얻어진 설계가 높은 정확도를 가지고 있음을 추가적으로 검증하였다.