• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.205-206
• /
• 2008

The transparent conductive film was prepared by bar coating method of poly (3, 4-ethylenedioxythiophene) (PEDOT) and poly (sodium 4-stylenesulfonate) grafted multi-walled carbon nanotubes (MWNT-PSS) nanocomposites solution on the polyethylene terephthalate (PET) film. In this case, multi-wall carbon nanotubes was treated by chemical methods to obtain water soluble MWNT-PSS and then blending with PEDOT. The non-covalent bonding of polymer to the MWNT surface was confirmed by Fourier transform infrared (FT-IR), thermal gravimetric analysis (TGA) and Transmission electro microscope (TEM) investigation also showed a polymer-wrapped MWNT structure. Furthermore, the electrical, transmission properties of the transparent conductive film were investigated and compared with control samples are raw PEDOT films.

• Geomechanics and Engineering
• /
• 제27권6호
• /
• pp.573-582
• /
• 2021

From the effect of bound water, this study aims to seek the potential reasons for difference of mechanical experiment results of subgrades soils. To attain the comparatively test condition of bound water, dry forming (DF) and wet forming (WF) were used in the specimen forming process before testing, series of laboratory tests, i.e., CBR tests, direct shear tests and compaction tests. The measured optimal moisture contents, maximum dry densities, CBR, cohesion c, and internal friction angle 𝜑 were given contrastive analysis. Then to detect the adsorptive bound water in the subgrade soils, the thermal gravimetric and differential scanning calorimetry (TG-DSC) test were employed under different heating rates. The free water, loosely bound water and tightly bound water in soils were qualitatively and quantitatively analyzed. It was found that due to the different dehydration mechanics, the lost bound water in DF and WF process show their own characteristics. This may lead to the different mechanical properties of tested soils. The clayey particles have a great influence on the bound water adsorbed ability of subgrade soils. The more the clay content, the greater the difference of mechanical properties tested between the two forming methods. Moreover, in highway construction of southern China, the wet forming method is recommended for its higher authenticity in simulating the subgrade filed humidity.

• Computers and Concrete
• /
• 제29권4호
• /
• pp.237-246
• /
• 2022

The concrete quality relies on general factors like preparation technique, uniformity of the compaction, amount and appropriateness of the additives. The current article investigates the impact of a well knows amino acid, L-arginine as an additive on water requirements, setting durations and characterization of various cement samples. Compressive strength tests of reference and L-arginine added cements at age of 2, 7 and 28 days were carried out according to TS-EN 196-1. Samples were blended by incorporating various amounts of L-arginine (25 ppm, 50 ppm and 75 ppm) in the cement water mixture which were tested with Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermo-gravimetric analysis (TG), scanning electron microscopy (SEM) and the energy-dispersive X-ray spectroscopy (EDS) on the 28th day. Results revealed that L-arginine does not affect the setting time, volume expansion of cement and water demands negatively; rather it imparts enhanced sustainability to the samples. It was determined that the highest value belonged to the 75L mortar with an increase of 2.6% compared to the reference sample when the compressive strengths of all mortars were compared on the 28th day. Besides, it has been observed that the development of calcium silicate hydrate or C-S-H gel, calcium hydroxide or CH and other hydrated products are associated with each other. L-arginine definitely has a contribution in the consumption of CH formed in the hydration process.

• 한국수소및신에너지학회논문집
• /
• 제33권4호
• /
• pp.330-336
• /
• 2022

In order to evaluate the possibility as a separator in alkaline water electrolysis, the high temperature characteristics were evaluated by measuring the membrane resistance and durability of 5 types of commercial anion exchange membranes in 7 M KOH solution and at 80℃. The membrane resistance of AEM membrane measured in 7 M KOH solution and at 80℃ had a lower value of about 8-24 times compared to the other membranes. The durability of AEM membrane tested with the soaking time in 7 M KOH solution and at 80℃ showed a very good stability and that of FAAM40 and FAAM75-PK showed secondly a good stability. The thermal stability with the soaking time in 7 M KOH solution and at 80℃ of FAAM40 and FAAM75-PK membrane analyzed by thermo-gravimetric analysis showed a good stability compared to the other membranes.

• 한국광물학회지
• /
• 제24권2호
• /
• pp.101-110
• /
• 2011

숯은 제조 및 활용과정에서 연소를 통해 함유된 성분들을 방출한다. 연소는 숯의 화학조성뿐만 아니라 숯의 표면 물성변화를 초래하고 다른 성분을 흡착하기 쉬운 상태로 변형시키기도 한다. 본 연구에서는 국내에서 시판되는 4종 숯에 대하여 화학적, 열적안정성과 중금속 및 유기유해물질의 거동 연구를 수행하였다. 상온에서 $400^{\circ}C$까지 열중량분석(TGA)과 시차주사열량계를 이용한 연소에 따른 중량변화와 관련된 물질거동 연구를 수행하였다. TGA 분석결과 대부분 시료에서 $200^{\circ}C$ 이전 약 10% 중량이 감소하였으며, $200^{\circ}C$ 이전에 잔류유기물과 가스상 물질이 소실되는 것을 알려준다. 열분석에 의한 질량 감소는 천연숯과 인공숯에서 다르게 측정되었다. 천연숯 K1, C1 에서는 $400^{\circ}C$까지의 가열 반응결과 약 15% 중량 감소가 있었으며, 인공숯 K2, C2의 경우 약 20%의 중량 감소가 있는 것으로 검출되었다. 가열에 의한 $400^{\circ}C$ 이하 중량감소는 주요 유기물과 VOC의 소설에 기인하는 것으로 나타났다. 화학조성분석에 근거한 X-선 회절분석을 실시하였다. 분석결과 첨가제인 Ba이 $Ba(NO_3)_2$ 및 $BaCO_3$ 등의 형태로 $NaNO_3$와 함께 숯에 다량 존재하는 것으로 분석되었다.

• 한국재난정보학회 논문집
• /
• 제19권3호
• /
• pp.532-544
• /
• 2023

연구목적: 신규로 사용되는 바이오연료를 기존 연료와 혼합하여 사용하는 경우 발생하는 위험성과 물성 변화를 열분석 방법(DSC, TGA)을 사용하여 화학 화재의 원인물질의 위험성을 확인하고, 평가할 방법과 그에 따른 물질의 위험성 관련 데이터를 확보함으로써 화재 원인 감식과 감정에 활용하기 위함이다. 연구방법: 본 실험에 사용된 연구 방법으로는 시차주사열량계(DSC : Differential Scanning Calorimeter)에 의하여 피크의 위치, 모양, 개수, 피크의 면적으로부터 열량 변화의 정량적인 정보를 통하여 열유속 차이(Difference in heat flux)를 측정하였고, 열중량분석(TGA : Analyzer)을 시행함으로써 특정한 온도에서 분해열 등에 의해 발생한 무게 변화를 연속적으로 측정하였다. 연구결과: 먼저 열 유속의 그래프에서 물질의 끓는점과 물질이 가지고 있는 고유 특성치 또는 분해에 필요한 에너지를 확인할 수 있다. 둘째 바이오디젤의 함량이 증가할수록 많은 피크를 확인 할 수 있었다. 셋째 비점이 낮은 물질들이 함유하고 있다는 것을 분석 결과로 확인할 수 있었다. 결론: 현재 새로운 에너지원으로 사용되고 있는 바이오디젤의 위험성을 다양한 물리·화학적 분석기법(DSC+TGA)을 통하여 사용함으로써 물질의 물적 위험성을 평가할 수 있음을 보여주었다. 아울러 본 연구의 시험방법별 차이의 비교와 실험에 대한 노하우를 축적하고 활용한다면 향후 위험물의 물성 연구와 물질 위험성 평가 연구에 있어 도움이 되리라 기대한다.

• 분석과학
• /
• 제33권2호
• /
• pp.68-75
• /
• 2020

We have developed 10 μmol/mol nitrogen and oxygen certified reference materials (CRMs) in helium, as a SI-traceable gas standard for a quantifying of impurities in pure gases for the first time in Korea. The standard gas mixtures of nitrogen and oxygen were prepared in 5000 μmol/mol and sequentially were diluted to 250 μmol/mol and 10 μmol/mol according to the gravimetric preparation. In each dilution step, two cylinders of CRMs were prepared. The verification of internal consistency among the prepared gas mixtures was performed by using GC-TCD. The amount fractions and those expanded uncertainties (k = 2) of nitrogen and oxygen in the standard gas mixtures were (10.12 ± 0.08) μmol/mol and (10.18 ± 0.08) μmol/mol for nitrogen, and (9.88 ± 0.06) μmol/mol and (9.94 ± 0.06) μmol/mol for oxygen, respectively. We have conducted a purity assessment of two commercial helium gases using developed CRMs. As the results of the purity assessment, nitrogen and oxygen were detected by (1.66 ± 0.03) μmol/mol and (0.31 ± 0.02) μmol/mol, respectively, as the impurities in one of the pure helium.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.541-548
• /
• 2012

New candidates composed of anthracene and 4-alkylethynylbenzene end-capped oligomers for OTFTs were synthesized under Sonogashira coupling reaction conditions. All oligomers were characterized by FT-IR, mass, UV-visible, and PL emission spectrum analyses, cyclic voltammetry (CV), differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), $^1H$-NMR, and $^{13}C$-NMR. Investigation of their physical properties showed that the oligomers had high oxidation potential and thermal stability. Thin films of DHPEAnt and DDPEAnt were characterized by spin coating them onto Si/$SiO_2$ to fabricate top-contact OTFTs. The devices prepared using DHPEAnt and DDPEAnt showed hole field-effect mobilities of $4.0{\times}10^{-3}cm^2$/Vs and $2.0{\times}10^{-3}cm^2$/Vs, respectively, for solution-processed OTFTs.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.107-107
• /
• 2010

Hydrogen is an alternative fuel for the future energy which can reduce pollutants and greenhouse gases. Synthesis gas have played an important role of synthesizing the valuable chemical compound, for example methanol, DME and GTL chemicals. Renewable biomass feedstocks can be potentially used for fuels and chemical production. Current thermal processing techniques such as fast pyrolysis, slow pyrolysis, and gasification tend to generate products with a large slate of compounds. Lignocellulose feedstocks such as forest residues are promising for the production of bio-oil and synthesis gas. Pyrolysis and gasification was investigated using thermogravimetric analyzer (TGA) and bubbling fluidized bed gasification reactor to utilize forest woody biomass. Most of the materials decomposed between $320^{\circ}C$ and $380^{\circ}C$ at heating rates of $5{\sim}20^{\circ}C/min$ in thermogravimetric analysis. Bubbling fluidized bed reactor were use to study gasification characteristics, and the effects of reaction temperature, residence time and feedstocks on gas yields and selectivities were investigated. With increasing temperature from $750^{\circ}C$ to $850^{\circ}C$, the yield of char decreased, whereas the yield of gas increased. The gaseous products consisted of mostly CO, CO2, H2 and a small fraction of C1-C4 hydrocarbons.

• 설비공학논문집
• /
• 제29권10호
• /
• pp.530-537
• /
• 2017

Scales generated inside pipes cause negative effects on heat transfer performance, pressure loss and flow rate due to increased thermal resistance and reduced flow cross-sectional area. If these scales are not prevented or eliminated, thermal-fluid performance of the facilities can be deteriorated, or in extreme cases, accidents such as explosion due to overheating can occur. There are two ways to remove the scales, physically and chemically. Removing the scales physically needs specific machines which are expensive, and removing them chemically may provoke corrosion or shorten the age of the facilities. In this study, an eco-friendly pipe scale cleaner using natural organic acid is developed by applying the concept of a limestone cave generation. The manufactured scale cleaner is applied to remove the scales in industrial, water heating and urinal pipes. The results show that this cleaner removes scales more effectively and safely compared to existing scale treatments. Scale removal efficiencies of this work is 1.2~10.7 times for industrial pipes and 1.8~15.5 times for boiler water heating pipes higher than those of conventional cleaners.