• 한국지반신소재학회논문집
• /
• 제7권3호
• /
• pp.1-7
• /
• 2008

본 연구에서 검토한 지오텍스타일 컨테이너와 튜브를 활용한 수로구조물은 UAE에서 수행한 프로젝트로 수심이 4.0m 이하인 경우 지오텍스타일 컨테이너를 저개식 바지로부터 해저바닥에 착지시키는 방법으로 시공하고 그 윗부분은 지오텍스타일 튜브로 시공을 수행하였다. 따라서, 본 연구에서는 지오텍스타일 컨테이너와 튜브를 활용하여 해상의 발전소 방파제 수로구조물 축조 시 고려된 구조물의 개별 및 다단구조물의 안정성, 지오텍스타일 재질 선택에 관련한 설계인자를 분석하였다. 또한, 방파제 구조물이 위치한 현장이 발전소의 용수의 유입과 유출이 발생하는 구역으로 발전소 유출입수의 온도가 방파제 구조물 내부의 온도변화에 미치는 영향에 대하여 분석하였다.

• 터널과지하공간
• /
• 제30권6호
• /
• pp.559-572
• /
• 2020

본 연구에서는 현지 암반의 진삼축 응력 조건과 온도 변화를 고려한 공벽 안정성 실험을 수행하고, 심부 지하의 응력 조건과 압력 조건에서 암석의 열역학적 거동을 관찰하였다. 중국 황색 사암과 국내 황등 화강암 시료를 이용하여 진삼축압축실험을 진행하였다. 역학 실험은 각각 9가지 구속압 조건에서 수행되었고 열역학 실험은 화강암 시료를 이용하여 6가지 구속압 조건에서 시료를 60℃~100℃로 가열하여 수행하였다. 역학 실험 결과 공벽 파괴가 발생하는 최대 주응력은 중간 주응력에 비례하는 것을 확인하였다. 열역학 실험에서는 온도 증가에 따라 공벽의 응력장에 열응력이 추가되어 공벽 파괴가 추가적으로 발생하는 것을 확인하였다. 실내 실험 결과를 분석하기 위해 모기쿨롱 파괴 기준식을 사용하여 분석하였다. 원통형 시료에 대한 전통적인 삼축압축시험 결과와 진삼축 조건 하의 공벽 파괴 실험 결과가 모두 진삼축 파괴 기준식인 모기쿨롱 파괴 기준식에 잘 부합됨을 확인하였다.

• 대한치과보철학회지
• /
• 제41권6호
• /
• pp.699-713
• /
• 2003

Statement of problem. Titanium is the most important material for biomedical and dental implants because of their high corrosion resistance and good biocompatibility. These beneficial properties are due to a protective passive oxide film that spontaneously forms on the surface. Purpose. The purpose of this study was to evaluate the responses of osteoblast-like cells on different surface treatments on Ti discs. Material and Methods. Group 1 represented the machined surface with no treatment. Group 2 surfaces were sandblasted with $50{\mu}m\;Al_2O_3$ under $5kgf/cm^2$ of pressure. Groups 3 and 4 were sandblasted under the same conditions. The samples were treated on a titanium oxide surface with reactive sputter depositioning and thermal oxidation at $600^{\circ}C$ (Group 3) and $800^{\circ}C$ (Group 4) for one hour in an oxygen environment. The chemical composition and microtopography were analyzed by XRD, XPS, SEM and optical interferometer. The stability of $TiO_2$ layer was studied by petentiodynamic curve. To evaluate cell response, osteoblast extracted from femoral bone marrow of young adult rat were cultured for cell attachment, proliferation and morphology on each titanium discs. Results and Conclusion. The results were as follows : 1. Surface roughness values were, from the lowest to the highest, machined group, $800^{\circ}C$ thermal oxidation group, $600^{\circ}C$ thermal oxidation group and blasted group. The Ra value of blasted group was significantly higher than that of $800^{\circ}C$ thermal oxidation group (P=0.003), which was not different from that of $600^{\circ}C$ thermal oxidation group (P<0.05). 2. The degree of cell attachment was highest in the $600^{\circ}C$ thermal oxidation group after four and eight hours (P<0.05), but after 24 hours, there was no difference among the groups (P>0.05). 3. The level of cell proliferation showed no difference among the groups after one day, three days, and seven days (P>0.05). 4. The morphology and arrangement of the cells varied with surface roughness of the discs.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1540-1554
• /
• 2023

To use nuclear energy sustainably, spent nuclear fuel, classified as high-level radioactive waste and inevitably discharged after electricity generation by nuclear power plants, must be managed safely and isolated from the human environment. In Korea, the land area is limited and the amount of high-level radioactive waste, including spent nuclear fuels to be disposed, is relatively large. Thus, it is particularly necessary to maximize disposal efficiency. In this study, a high-efficiency deep geological repository concept was developed to enhance disposal efficiency. To this end, design strategies and requirements for a high-efficiency deep geological repository system were established, and engineered barrier modules with a disposal canister for pressurized water reactor (PWR)-type and pressurized heavy water reactor type Canada deuterium uranium (CANDU) plants were developed. Thermal and structural stability assessments were conducted for the repository system; it was confirmed that the system was suitable for the established strategies and requirements. In addition, the results of the nuclear safety assessment showed that the radiological safety of the new system met the Korean safety standards for disposal of high-level radioactive waste in terms of radiological dose. To evaluate disposal efficiency in terms of the disposal area, the layout of the developed disposal areas was assessed in terms of thermal limits. The estimated disposal areas were 2.51 km² and 1.82 km² (existing repository system: 4.57 km²) and the excavated host rock volumes were 2.7 Mm³ and 2.0 Mm³ (existing repository system: 4.5 Mm³) for thermal limits of 100 ℃ and 130 ℃, respectively. These results indicated that the area and the excavated volume of the new repository system were reduced by 40-60% compared to the existing repository system. In addition, methods to further improve the efficiency were derived for the disposal area for deep geological disposal of spent nuclear fuel. The results of this study are expected to be useful in establishing a national high-level radioactive waste management policy, and for the design of a commercial deep geological repository system for spent nuclear fuels.

• 한국대기환경학회지
• /
• 제30권6호
• /
• pp.586-599
• /
• 2014

During the last two decades, indoor air quality and volatile organic compounds (VOCs) have been of concern in Korean society due to their nature of potential health impacts. In order to investigate the pollution levels of VOCss in indoor environments, establishment of a solid test method for monitoring the airborne VOCss is essential. In Korea, a method based on adsorbent sampling and GC analysis coupled with thermal desorption was proclaimed as the Korea Standard Method for Indoor Air Quality Test. This study was carried out to examine some inherent problems of the VOCs measurement method. The VOCs method does not describe in detail preparing the standard samples. The standard samples may be prepared by impregnation of either liquid standard solutions or a mixture of standard gases. In this study, we investigated the optimal temperature condition for transferring the liquid standards onto a standard adsorbent tube. As a result, keeping the impregnation temperature at $250^{\circ}C$ will be recommended in regard of the boiling points of multiple target analytes and the thermal stability of the adsorbent. We also demonstrated some problems associated with handling of a syringe used for transferring the standard solutions onto the adsorbent tubes, and a best way to get rid of the syringe problems was suggested. Finally, a number of field works were conducted to evaluate the performance of adsorbent sampling methods. Comparison of different adsorbent tubes, i.e. tube packed with single sorbent (Tenax) and double sorbents (Tenax with Carbotrap), revealed that 30 to 40% differences between the two groups, implying that sampling efficiency is depending on the volatility and the strength of adsorbents. However, duplicate precisions for VOCs sampling with a same type of adsorbent and at same flow rates appeared to be satisfactory to be all within 20%, which is a quality control guideline. Distributed volume precisions were also found to be within a guideline value, 25%, although the precision was in general inferior to the duplicate precision. The Korea indoor VOCs test method should be more refined and improved in many aspects, particularly procedure and instrumentation for preparing the standard samples and specification of quality control assessment.

• 한국환경과학회지
• /
• 제29권12호
• /
• pp.1223-1237
• /
• 2020

This study focused on comparing the meteorological conditions in the Atmospheric Boundary Layer (ABL) on high-event days and non-event days in the Seoul Metropolitan Area (SMA). We utilized observed PM10 and meteorological variables at the surface as well as at the upper heights. The results showed that high-event days were consistently associated with lower wind speed, whereas wind direction showed no particular difference between high-event and non-event days with frequent westerlies and northwesterlies for both cases. During high-event days, the temperature was much warmer than the monthly normal values with a sharp increasing trend, and Relative Humidity (RH) was higher than the monthly normal, especially on high-event days in February. During high-event days in spring, a double inversion layer was present at surface and upper heights. This indicates that stability in the multi-layer is an important indicator of higher PM10 concentrations. Net radiation in spring and winter is also closely associated with higher PM10 concentrations. Strong net radiation resulted in large sensible heat, which in turn facilitated a deeper mixing height with diluted PM10 concentrations; in contrast, PM10 concentrations were higher when sensible heat in spring and winter was very low. We also confirmed that convective and friction velocity was higher on non-event days than on high-event days, and this was especially obvious in spring and winter. This indicated that thermal turbulence was dominant in spring, whereas in winter, mechanical turbulence was dominant over the SMA.

• 한국항공우주학회지
• /
• 제33권8호
• /
• pp.99-104
• /
• 2005

인공위성에서 구조체의 역할은 발사환경 및 궤도상의 모든 발생 가능한 환경에서 위성체를 안전하게 지지하는 것이다. 인공위성의 개발단계에서 구조 및 열 개발모델은 유한요소모델 보정 및 구조강도/특성 확인 등의 구조적인 특징과 열평형시험을 통한 열적 안정성의 확인을 그 목적으로 한다. 이때 얻어진 결과는 실제 비행모델의 개발 시 구조 및 열적 안정성 검증 등의 중요한 자료로써 활용된다. 본 논문에서는 고정밀 지구관측위성의 구조 및 열 개발모델에 대해 구조 관점에서의 설계/해석에 대해 기술하고 또한 모달 시험을 통한 시험결과와 유한요소해석과의 비교에 대해 기술한다.

• Advanced Composite Materials
• /
• 제17권3호
• /
• pp.235-246
• /
• 2008

This paper is concerned with geotextiles bonded chemically with geogrid to form a geocomposite. Geotextiles, thermally bonded and non-woven, play an important role as a separator. Also, this study investigates the resistance to the application environment of geotextile composites. Here, numerous tests have been performed and it was revealed from experimental results that thermally bonded geotextile in geosynthetic composites showed superior characteristics to that manufactured from needle punched non-woven method in terms of tensile strength, tensile strain and high separation performance. It was noted from experiments that the geotextile prepared for separation purpose and manufactured in a thermal bonding method showed relatively low permittivity so that it could be used as a smooth separator. In addition, PVA geotextile/HDPE geomembrane composites were designed and manufactured to investigate the waste landfill related properties. Numerous experiments have been performed and experimental results were summarized to evaluate practical applicability of PVA geotextile/HDPE geomembrane composites. Among the properties of proposed geomembrane composites, evaluation has been focused on the investigation of mechanical properties, AOS (apparent opening size), permittivity and ultraviolet stability.

• 접착 및 계면
• /
• 제8권4호
• /
• pp.1-7
• /
• 2007

친환경적인 수분산 폴리우레탄은 코팅, 접착제 등의 분야에서 급속하게 사용되어지고 있다. 하지만 수분산 폴리우레탄은 용제형 폴리우레탄에 비해 내화학성, 내열성, 기계적 물성 등이 떨어져 이를 개선하기 위한 연구가 활발히 진행되고 있다. 본 연구에서는 polyester polyol, 4,4-dicyclohexylmethane diisocyanate ($H_{12}MDI$), dimethylolpropionic acid (DMPA), ethylenediamine (EDA) 및 유기화된 나노클레이를 사용하여 폴리우레탄/클레이 나노복합체의 열적, 기계적 물성을 측정한 결과, 물성이 향상됨을 확인할 수 있었다. 또한, 나노클레이의 함량이 증가할수록 접착강도가 증가하였으며, 특히 3 wt% 함량일 때 최적의 접착력을 나타내었다.

• 플랜트 저널
• /
• 제15권4호
• /
• pp.36-42
• /
• 2019

최근 환경 규제 정책 강화에 따른 입지 제약발생으로 발전소 부지가 높아지고 냉각수 관로의 길이가 증가되어 냉각수 계통 내 수격현상이 심화된다. 이는 발전소 안정성에 심각한 영향을 주게 된다. 본 연구에서는 수두가 높은 1,000 MW급 대용량 석탄화력발전소 냉각수계통에 대한 안정성을 확보하고자 비정상상태 1차원 해석 상용 소프트웨어인 LIQT 7.2을 사용하여 과도현상을 분석하고, 수격현상을 저감하기 위해 수격방지장치를 개별 및 조합 적용하여 성능특성에 대한 효과를 예측하였다. 수격방지 장치를 설치하지 않고 펌프가 불시 정지되었을 경우 발생하는 냉각수 서지압력은 펌프 출구 측에서 가장 크게 나타났다. 이러한 냉각수계통의 서지압력을 저감시키는 가장 효과적이고 간단한 방법은 펌프 보호를 위해 필수적 장치인 유압구동역류방지밸브에 진공파괴밸브를 조합한 것이다.