• 한국지하수토양환경학회지:지하수토양환경
• /
• 제14권5호
• /
• pp.62-70
• /
• 2009

본 연구에서는 lab-scale의 열탈착 장치를 설계 및 제작하고 실제 유류오염 토양을 대상으로 다양한 운전조건에 따른 오염토양정화성능을 비교하였다. 대상 토양은 군부대로 사용되던 부지 내 유류저장소 부근 고농도 오염토로 선정하였고, 10 L 용적의 원통형 batch 형태의 직접 가열식 열탈착기를 사용하여 초기 TPH 농도 4476 ppm의 고농도 오염 토양시료를 다양한 운전조건에서 열탈착하여 처리효율 분석을 수행하였다. 열중량 분석을 통해 열탈착 실험에서 대상 오염물질을 제거하기 위한 토양 시료의 평균 가열온도는 $200-300^{\circ}C$가 적합한 것으로 확인하였다. Batch 형식의 운전을 통한 처리효율 분석 결과 토양 내 오염물질을 90% 이상 제거하기 위해서는 약 $200^{\circ}C$에서는 10분, 약 $300^{\circ}C$에서는 5분 이상의 처리 시간이 요구되었다. 함수율이 높고 덩어리진 토양일수록 처리효율, 특히 고분자 오염물질의 처리효율이 크게 감소함을 보였다. 따라서 풍건을 통하여 오염토양 내 수분을 저하시킨 후 분쇄 처리하여 열탈착기에 주입하는 것이 효과적이라 판단된다. 또한 처리 전 토양과 처리 후 토양의 물리화학적 특성 비교한 결과 고온에 의해 증발된 수분함량을 제외하고 나머지 특성들은 거의 변화가 없어 실제 복원현장에서 오염토양을 열탈착 공정을 이용하여 오염물질을 제거한 후 추가적인 후처리 과정 없이 처리토양을 원래 위치에 복원하는 것이 가능함을 확인하였다. 본 연구결과는 현장운전에서 오염물질의 제거 효율을 극대화하기위한 인자 결정 및 검증을 위한 기초자료로 활용될 수 있을 것으로 사료된다.

• 한국수소및신에너지학회논문집
• /
• 제22권3호
• /
• pp.363-371
• /
• 2011

In this paper, a three-dimensional hydrogen desorption model is developed to precisely study the hydrogen desorption kinetics and resultant heat and mass transport phenomena in metal hydride hydrogen storage vessels. The metal hydride hydrogen desorption model, i.e. governed by the conservation of mass, momentum, and thermal energy is first experimentally validated against the temperature evolution data measured on a cylindrical $LaNi_5$ metal hydride vessel. The equilibrium pressure used for hydrogen desorption simulations is derived as a function of H/M atomic ratio and temperature based on the experimental data in the literature. The numerical simulation results agree well with experimental data and the 3D desorption model successfully captures key experimental trends during hydrogen desorption process. Both the simulation and experiment display an initial sharp decrease in the temperature mainly caused by relatively slow heat supply rate from the vessel external wall. On the other hand, the effect of heat supply becomes influential at the latter stages, leading to smooth increase in the vessel temperature in both simulation and experiment. This numerical study provides the fundamental understanding of detailed heat and mass transfer phenomena during hydrogen desorption process and further indicates that efficient design of storage vessel and heating system is critical to achieve fast hydrogen discharging performance.

• 한국대기환경학회지
• /
• 제27권2호
• /
• pp.191-200
• /
• 2011

A way to adsorptively remove indoor carbon dioxide at relatively lower concentration under ambient temperature was studied. A small lab-scale carbon dioxide adsorption and desorption reactors were prepared, and 5A and 13X zeolites were packed in this reactors to investigate their adsorption and desorption characteristics. The inflow carbon dioxide concentration was controlled to 5,000 ppm, relatively higher concentration found in indoor spaces with air quality problems, by diluting carbon dioxide with nitrogen gas. The flow rate was varied as 1~5 L/min, and the carbon dioxide concentration after this reactor was constantly monitored to examine the adsorption characteristics. It was found that 5A adsorbed more carbon dioxide than 13X. A lab-scale carbon dioxide desorption reactor was also prepared to investigate the desorption characteristics of zeolites, which is essential for the regeneration of used zeolites. The desorption temperature was varied as $25{\sim}200^{\circ}C$, and the desorption pressure was varied as 0.1~1.0 bar. Carbon dioxide desorbed better at higher temperature, and lower pressure. 5A could be regenerated more than three times by thermal desorption at $180^{\circ}C$. It is required to modify zeolites for higher adsorption and better regeneration performances.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1997년도 제13회 학술발표회 논문개요집
• /
• pp.94-94
• /
• 1997

• 한국수소및신에너지학회논문집
• /
• 제9권3호
• /
• pp.111-118
• /
• 1998

The intrinsic degradation behavior of $(V_{0.53}Ti_{0.47})_{0.925}Fe_{0.075}$ alloy with BCC structure and the two plateau regions (the low and high plateau region) has been investigate during the temperature-induced hydrogen absorption-desorption cycling (thermal cycling). After 400 thermal cycles between room temperature and $600^{\circ}C$ under 10atm $H_2$, the total reversible hydrogen absorption capacity decreased by about 40%. From thermal desorption analysis it was found that the degradation behavior at each plateau region was different. In addition, XRD analysis showed that the crystal structure of the sample in de-hydrided state was changed from BCC to BCT after degradation, and that of the sample in hydrided state it was maintained as FCC although peaks were broadened after degradation. From the result of static isothermal hydrogenation treatment it were found that crystal structure change from BCC to BCT was caused by the thermal energy. TEM analysis showed that the peak broadening was due to the formation of an amorphous phase in FCC matrix.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권3호
• /
• pp.73-81
• /
• 2013

Various remediation methods have been applied to clean soils contaminated with pollutants. They remove contaminants from the soils by utilizing physicochemical, biological, and thermal processes and can satisfy soil remediation standards within a limited time; however, they also have an effect on the biological functions of soils by changing soil properties. In this study, changes of the biological properties of soils before and after treatment with three frequently used remediation methods-soil washing, land farming, and thermal desorption-were monitored to investigate the effects of remediation methods on soil biological functions. Total microbial number and soil enzyme activities, germination rate and growth of Brassica juncea, biomass change of Eisenia andrei were examined the effects on soil microorganisms, plant, and soil organisms, respectively. After soil washing, the germination rate of Brassica juncea increased but the above-ground growth and total microbial number decreased. Dehydrogenase activity, germination rate and above-ground growth increased in both land farming and thermal desorption treated soil. Although the growth of Eisenia andrei in thermal desorption treated soil was higher than any other treatment, it was still lower than that in non-contaminated soil. These results show that the remediation processes used to clean contaminated soil also affect soil biological functions. To utilize the cleaned soil for healthy and more value-added purposes, soil improvement and process development are needed.

• 분석과학
• /
• 제19권6호
• /
• pp.553-558
• /
• 2006

본 연구에서는 Tedlar bag을 사용하여 조제한 작업용 기체상 표준시료를 열탈착과 GC/FID를 조합한 시스템으로 분석할 때, 발생 가능한 오차를 평가하고자 하였다. 이를 위해, 여러 가지 VOC성분(Benzene, Toluene, p-Xylene, Styrene)을 함유하는 표준시료를 4 가지 초기농도대(4~40 ppb)에서 조제하였다. 그리고 이들 작업용 시료를 이용하여, 각각의 검량결과를 도출하고 비교분석을 실시 하였다. 본 실험에서 설정한 4~40 ppb 농도대의 검량결과를 비교하기 위해, 공기분배/저온농축/열탈착 전용기(Air server/thermal desorber (AS/TD))와 조합한 GC/FID 시스템을 사용하였다. 본 연구의 결과, 표준시료의 조제방식이나 그와 연관된 초기농도의 차이가 검량 특성에 영향을 미친다고 하기는 어렵다는 결론을 내릴 수 있었다. 그러나 테들러백을 사용하는 경우, 여타 성분들에 비해 Styrene성분에서 감도가 떨어지는 경향이 크게 나타나는 점을 확인할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.146-146
• /
• 2000

We have studied the etching of Si(100)-2xl by Cl and Br, using scanning tunneling microscopy to obtain morphological information that can be related to reaction and desorption pathways. Clean surfaces were exposed to molecular halogens at room temperature to produce well-defined chemisorption structures for coverages in the range 0.2-1.0 ML. Heating to 750-750 K induced etching by thermal desorpton. Analysis of the halogen concentration before and after heating indicated that the rates of desorption for SICl2 or SiBr2 were greatest for intermediate coverages and that etching was suppressed as saturation was reached. Hence, desorption is not simply proportional to the concentration of species that can form adsorbed precursors SiX2(a). Instead, it is directly coupled to the creation of monomer vacancies adjacent to the SiX2 (a) unit because this increases the lifetime of the excited state and increases the likelihood of its desorption. Increasing the surface concentration of halogens reduces the rate of vacancy formation. We show that these rates are also affected by a re-dimerization process in the high temperature Br-stabilized Si(100)-3xl reconstruction that increases the likelihood of siBr2(a) formation and enhances its desorption. I will also discuss recent result for F etching on Si(100)-2xl.

• 한국진공학회지
• /
• 제15권1호
• /
• pp.73-80
• /
• 2006

Si(100)에 주입된 불활성 기체 이온들의 열적 방출 특성을 열탈착(temperature-programmed desorption; TPD) 질량분석법으로 고찰하였다. 약 400K의 표면 온도 조건에서 1keV 비온빔에 시료를 노출시켜 주었을 때, He은 $500\~1100 K$의 넓은 온도 범위에서 Si(100)결정 밖으로 분출되어 나온 반면, Ne, Ar, 및 Kr은 각각 810, 860, 875 K 근처에서 매우 좁은 온도 범위에서 TPD 피크를 나타내며 급격하게 방출되었다. He+ 이온으로 처리된 Si(100)은 표면 원자 구조의 손상이 상대적으로 최소한으로 일어났지만, $Ne^+,\;Ar^+,\;Kr^+$ 등의 이온들로 처리된 경우는 질량이 클수록 표면이 원자 스케일로 더 심하게 손상되었음이 수소 흡탈착 분석 결과로 밝혀졌다. 이온빔에 의한 결정 내부의 결함 생성과 관련하여 이러한 실험적 결과가 시사하는 점들을 논의하였다

• Nuclear Engineering and Technology
• /
• 제49권4호
• /
• pp.873-880
• /
• 2017

To identify the feasibility of disposing of spent activated carbon as a clearance level waste, we performed characterization of radioactive pollution for spent activated carbon through radioisotope analysis; results showed that the C-14 concentrations of about half of the spent activated carbon samples taken from Korean NPPs exceeded the clearance level limit. In this situation, we selected thermal treatment technology to remove C-14 and analyzed the moisture content and thermal characteristics. The results of the moisture content analysis showed that the moisture content of the spent activated carbon is in the range of 1.2-23.9 wt% depending on the operation and storage conditions. The results of TGA indicated that most of the spent activated carbon lost weight in 3 temperature ranges. Through py-GC/MS analysis based on the result of TGA, we found that activated carbon loses weight rapidly with moisture desorption reaching to $100^{\circ}C$ and desorbs various organic and inorganic carbon compounds reaching to $200^{\circ}C$. The result of pyrolysis analysis showed that the experiment of C-14 desorption using thermal treatment technology requires at least 3 steps of heat treatment, including a heat treatment at high temperature over $850^{\circ}C$, in order to reduce the C-14 concentration below the clearance level.