• 한국항공우주학회지
• /
• 제47권10호
• /
• pp.720-727
• /
• 2019

하이브리드 로켓 연소의 저주파수 연소불안정은 고체연료의 열적지연(Thermal Lag)과 경계층 유동 변화에 의한 열전달 진동의 공진에 의해 발생한다. 본 연구는 연료 표면 근처의 경계층 유동의 교란이 어떤 물리적 과정에 의해 발생하여 연소불안정으로 발달하는지를 실험적으로 확인하였다. 특히 산화제의 스월 분사는 연소 안정화에 매우 큰 기여를 하므로 스월 강도를 증가시키며 경계층의 변화와 연소불안정의 발생과정을 연구하였다. 경계층 섭동을 확인하기 위하여 연소 유동장을 가시화하였고 이미지에 대한 POD(Proper Orthogonal Decomposition) 분석을 시도하였다. 스월 강도가 증가할수록 500Hz 대역 고주파수 p', q'의 결합이 약해지며 열적지연과 유사한 주파수 특성을 갖는 Rayleigh Index의 섭동 발생도 약해져 경계층 진동의 발생이 점차 감소하는 것을 관찰하였다. 따라서 고주파수 p', q'의 주기적인 결합에 의한 축 방향 경계층 진동이 나타나면 열적지연 주파수와 공진에 의한 연소불안정이 발생함을 확인하였다.

• 대한기계학회논문집B
• /
• 제38권12호
• /
• pp.983-990
• /
• 2014

본 연구에서는 등온 벽에서 가까이에 위치한 유동과 같이 온도 구배가 큰 곳에서 발생하는 전도오차를 줄이기 위해 새로운 열전대의 형상 설계 및 제작 방법을 제안하고자 한다. 전도오차를 줄이기 위하여 지름이 $79.9{\mu}m$인 열전대를 이용했으며, 아크 용접을 통해 제작된 상대적으로 접점이 큰 일반 열전대와 다른 butt-welded 열전대를 제작하기 위하여 용접용 5 축 장비가 고안됐다. 열전대의 단면을 맞닿게 하여 용접해 접합부위 크기를 최소화 했다. 온도 보정 실험을 통하여, 일반적인 형상의 열전대와 이 연구에서 제안하는 열전대의 온도 측정 결과가 동일함을 알 수 있었다. 접합부가 $79.9{\mu}m$ 지름을 가지는 butt-welded 열전대를 온도 경계층에 침투시켜서 전도에 의한 오차를 최소화하여 급격히 변하는 온도 경계층의 온도를 효과적으로 측정할 수 있게 되었다. 개발된 센서를 이용하여 선형 터빈 날개가 장착된 풍동에서 온도 경계층을 측정하였고, 측정된 결과를 Nusselt 수로 나타내었다.

• 한국대기환경학회지
• /
• 제24권5호
• /
• pp.551-561
• /
• 2008

In order to clarify the impact of anti-heat insulation pavement on the thermal structure of atmospheric boundary layer, field experiments and numerical simulations were carried out. Field experiment with various pavements were also conducted for 24 hours from 09LST 19 June 2007. And numerical experiment mainly focused on the impact of albedo variation, which is strongly associated with thermal characteristics of insulated pavement materials, on the temporal variation of planterly boundary layer. Numerical model used in this study is one dimension model with Planterly Boundary Layer developed by Oregon State University (OSUPBL). Because anti-heat insulation pavement material shows higher albedo value, not only maximum surface temperature but also maximum surface air temperature on anti-heat insulation pavement is lower than that on asphalt. The maximum value of surface temperature only reach on $49.5^{\circ}C$. As results of numerical simulations, surface sensible heat flux and the height of mixing layer are also influenced by the values of albedo. Therefore the characteristics of urban surface material and its impact on atmosphere should be clarified before the urban planning including improvement of urban heat environment and air quality.

• 대한기계학회논문집A
• /
• 제30권8호
• /
• pp.949-956
• /
• 2006

The method of Greenwood and Williamson is extended to obtain a solution to the coupled non-linear problem of steady-state electrical and thermal conduction across a crack in a conductive layer, for which the electrical resistivity and thermal conductivity are functions of temperature. The problem can be decomposed into the solution of a pair of non-linear algebraic equations involving boundary values and material properties. The new mixed-boundary value problem given from the thermal and electrical boundary conditions for the crack in the conductive layer is reduced in order to solve a singular integral equation of the first kind, the solution of which can be expressed in terms of the product of a series of the Chebyshev polynomials and their weight function. The non-existence of the solution for an infinite conductor in electrical and thermal conduction is shown. Numerical results are given showing the temperature field around the crack.

• Journal of applied mathematics & informatics
• /
• 제40권1_2호
• /
• pp.99-115
• /
• 2022

The problem of Benard double diffusive Marangoni convection is investigated in a horizontally infinite composite layer system consisting of a two component fluid layer above a porous layer saturated with the same fluid, using Darcy-Brinkman model with constant heat sources/sink in both the layers. The lower boundary of the porous region is rigid and upper boundary of the fluid region is free with Marangoni effects. The system of ordinary differential equations obtained after normal mode analysis is solved in closed form for the eigenvalue, thermal Marangoni number for two types of thermal boundary combinations, Type (I) Adiabatic-Adiabatic and Type (II) Adiabatic -Isothermal. The corresponding two thermal Marangoni numbers are obtained and the essence of the different parameters on non-Darcy-Benard double diffusive Marangoni convection are investigated in detail.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제6권2호
• /
• pp.63-73
• /
• 2002

The influence of unsteady boundary layer magnetohydrodynamic flow with thermal relaxation of perfectly conducting fluid, past a semi-infinite plate, is considered. The governing non linear partial differential equations are solved using the method of successive approximations. This method is used to obtain the solution for the unsteady boundary layer magnetohydrodynamic flow in the special form when the free stream velocity exponentially depends on time. The effects of Alfven velocity $\alpha$ on the velocity is discussed, and illustrated graphically for the problem.

• 유변학
• /
• 제11권2호
• /
• pp.122-127
• /
• 1999

일정한 표면 온도를 갖는 쐐기형 물체 주위를 지나는 미세 극성유체의 정상상태 층류유동에 대하여 고찰하였다. Falkner & Skan에 의하여 유도된 상사해법을 이용하여 유동방향의 비선형 경계층 방정식의 해를 구하였다. 4계 Runge-Kutta법을 사용하여 Pr 수가 1일 경우의 열전달 특성을 수치적으로 해석하였고, 물질 매개변수에 대한 영향을 고찰하였다. 경계층을 가로지르는 무차원 속도와 Nusselt 수의 분포는 쐐기형 물체 주위를 지나는 Newtonian 유체의 경우와 비교하였다. Pr 수가 1이고 일정한 쐐기각을 가질 경우 물질 매개변수 K값이 증가할수록 Newtonian 유체의 경우보다 미세 극성유체의 경우 경계층의 두께가 증가하는 결과를 보였다. 그러나 물질매개변수 K값이 일정할 경우, Newtonian 유체보다 미세 극성유체의 열전달율이 더 작은 경향을 나타내었다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제16권E2호
• /
• pp.97-103
• /
• 2000

A Thermal Internal Boundary Layer(TIBL) develops over the landside from the coast due to the surface temperature difference between the land the sea when sea breeze froms. The TIBL plays an important role in determining the pollutant concentrations where the plume emitted from a tall stack near the coast fumigates to the ground. The fumigation results in the high ground the TIBL height from the available meterological data is very important. The TIBL models avaliable in the literature were analyzed to identify the suitable model to apply in the fumigation. The TIBL heights predicted by the existing models were compared with the measurements in the water tank experiment. The results show that the TIBL models by Raynor is appropriate to predict the height of TIBL.

• 한국레이저가공학회지
• /
• 제3권1호
• /
• pp.29-37
• /
• 2000

For a development purpose of thick metal / metal Graded-Boundary Materials(GBM), a basic research on the fabrication of Ni-Cr/steel GBM was carried out by a laser beam and its mechanical properties and thermal characteristics were investigated. In order to produce a compositionally graded boundary region between substrate steel and added Ni-Cr alloy, a series of surface alloying treatments was performed with a high power CO$_2$ laser beam. Ni-Cr sheet was placed on a low carbon steel plate(0.18%C), and then a CO$_2$ laser beam was irradiated on the surface to produce a homogeneous alloyed layer. On this first surface-alloyed layer, another Ni-Cr sheet was placed and then the CO$_2$ laser beam was irradiated again to produce second surface-alloyed layer. Sequential repetitions of laser surface alloying treatment 4 times resulted in a graded-boundary region with the thickness of about 1.4mm. Simultaneous concentration profiles of different kinds of alloying elements(Ni and Cr) showed from 42%Ni, 45%Cr and 13%Fe on surface region to 0%Ni, 0%Cr and 99%Fe in substrate region. Also a thermal conductivity gradient resulted in graded-region and its value changed from 0.03㎈/cm s$\^{C}$ in surface region to 0.1㎈/cm s$\^{C}$ in substrate region. Microstructural observation showed that any visible root porosities and solidification shrinkage cracks were not formed in graded region between alloyed layer and substrate region during rapid cooling.

• 한국기후변화학회지
• /
• 제7권3호
• /
• pp.357-371
• /
• 2016

Buildings in the city acts as a cause of distorted wind direction, wind speed, causing the stagnation of the air flow. In the recent trend of climate change can not but consider the temperature rise of the urbanization. This study was aimed to analyze the thermal comfort of planetary boundary layer in different artificial constructions areas which has a direct impact on urban climate, and estimating the warming phenomena. Envi-met model was used to consider the urban structure associated with urban growth in order to precisely determine the impact of the building on the city weather condition. The analyzed values of thermal comfort index were temperature, wind speed, horizontal and vertical turbulent diffusivity. In particular, analysis of the PPD(Predicted Percentage of Dissatisfied) represents the human thermal comfort. In this study, by adjusting the arrangement and proportion of the top floor building in the urban it was found that the inflow of the fresh air and cooling can be derived low PPD. Vertical heat flux amount of the city caused by climate change was a factor to form a high potential temperature in the city and the accumulation of cold air does not appear near the surface. Based on this, to make the city effectively respond to climate change may require a long-term restructuring of urban spatial structure and density management.