• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.11
• /
• pp.926-929
• /
• 2012

The $Sr_{0.7}Bi-{2.3}Nb_2O_9$(SBNO) thin films were deposited on Si substrate by RF magnetron sputtering method at $300^{\circ}C$ of substrate temperature. And the SBNO thin films were annealed at $650{\sim}800^{\circ}C$ using RTA (rapid thermal annealing). The grain of SBNO thin films were increased with the increase of annealing temperature. The dielectric constant (100) of SBNO thin film was obtained by RTA above $750^{\circ}C$. The voltage dependence of dielectric loss showed a value within 0.03 in voltage ranges of -5~+5 V. Also, the dielectric constant characteristics showed a stable value with the increase of frequency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.11a
• /
• pp.85-89
• /
• 1993

Silicone oil exhibits the properies of both organic and inorganic substances and, thus, it has many superior properties such as higher thermal resistance and lower thermal oxidation level when compared to other dielectric liquids. In order to investigate the dielectric characteristics, dielectric liquids of viscosity 1 [cSt] is chosen as the specimen and experiment is performed in the temperature range of 20∼65 [$^{\circ}C$] and frequency range of 30∼1${\times}$10$\^$6/ [Hz] respectively. As a result, the observed linear decrease in dissipation factor at the frequency range below 3 [kHz] is due to the influence of frequency, whereas the increase in dissipation factor at higher frequency range is contributed by electrode's resistance. At a fixed frequency of 30 [kHz], increasing temperature results in higher peak value and wide width of the absorption curve. This is due to the increase in dipole and viscosity. As temperature increases, dipole moment is decreased from 0.98 to 0.64 [debye]. The activation energy which causes the relaxation and loss of dielectric is obtained about 15 [kcal/mole].

• Carbon letters
• /
• v.24
• /
• pp.62-72
• /
• 2017

The aim of this work was to evaluate the dielectric properties of impregnated and activated palm kernel shells (PKSs) samples using two activating agents, potassium carbonate ($K_2CO_3$) and sodium hydroxide (NaOH), at three impregnation ratios. The materials were characterized by moisture content, carbon content, ash content, thermal profile and functional groups. The dielectric properties were examined using an open-ended coaxial probe method at various microwave frequencies (1-6 GHz) and temperatures (25, 35, and $45^{\circ}C$). The results show that the dielectric properties varied with frequency, temperature, moisture content, carbon content and mass ratio of the ionic solids. PKSK1.75 (PKS impregnated with $K_2CO_3$ at a mass ratio of 1.75) and PKSN1.5 (PKS impregnated with NaOH at a mass ratio of 1.5) exhibited a high loss tangent ($tan{\delta}$) indicating the effectiveness of these materials to be heated by microwaves. $K_2CO_3$ and NaOH can act as a microwave absorber to enhance the efficiency of microwave heating for low loss PKSs. Materials with a high moisture content exhibit a high loss tangent but low penetration depth. The interplay of multiple operating frequencies is suggested to promote better microwave heating by considering the changes in the materials characteristics.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1417-1419
• /
• 1997

In this paper, the dielectric properties is made researches by the dose of electron beam in order to investigate the electrical properties for transformer oils due to electron beam irradiation. To measure the dielectric loss of irradiated specimen, the liquid electrode of coaxial cylindrical shape is used, and its geometric capacitance is 16 [pF]. And the dielectric dissipation factor, $tan{\delta}$, is measured by using the Video Bridge 2150. The thermal static oven with an automatic temperature controller is used so as to apply specific temperature to specimen. This experiments for measuring the dielectric loss is performed at $20{\sim}120[^{\circ}C]$ in temperature range, $30{\sim}1.5{\times}10^5[Hz]$ in frequency and $300{\sim}500[mV]$ in voltage.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1924-1926
• /
• 2005

Poly(methyl methacrylate) (PMMA) is one of the promising representive of polymer gate dielectric for its high resistivity and sutible dielectric constant. PMMA (Mw=96700) films were prepared on p-Si by spin coating method. PMMA were coated compactively and flatly as observes by AFM. MIS(Al/PMMA/p-Si) structure was made and capacitance-voltage (C-V) and current-voltage (I-V) measurements were done with PMMA films for repeated annealing cycles at $100^{\circ}C$. 1-V measured at various delay times $(0{\sim}20sec)$ showed little change and the absence of hysteresis in the I-V characteristics with delay times, which eliminate the possibility of deep traps in the PMMA films. The observed thermal stability, smooth surfaces, dielectric constant, I-V behavior implies PMMA formed by spin coating can be used as an efficient gate dielectric layer in OTFTs.

• Electrical & Electronic Materials
• /
• v.8 no.5
• /
• pp.611-618
• /
• 1995

The (Sr$_{1-x}$ .Ca$_{x}$)TiO$_{3}$+0.6[mol%]Nb$_{2}$O$_{5}$ (0.05.leq.x.leq.0.2) ceramics were fabricated to form semiconducting ceramics by sintering at about 1350[.deg. C] in a reducing atmosphere(N$_{2}$ gas). Metal oxides, CuO, was painted on the both surface of the specimens to diffuse to the grain boundary. They were annealed at 1100 [.deg. C] for 2 hours. The 2nd phase formed by thermal diffusing from the surface lead to a very high apparent dielectric constant. According to increase of the frequency as a functional of temperature, all specimens used in this study showed the dielectric relaxation, and the relaxation frequency was above 106 [Hz], it move to low frequency with increasing resistivity of grain. The specimens showed three kinds of conduction mechanisms in the temperature range 25-125 [.deg. C] as the current increased: the region I below 200 [V/cm] shows the ohmic conduction. The region rt between 200 [V/cm] and 2000 [V/cm] can be explained by the Poole-Frenkel emission theory, and the region III above 2000 [V/cm] is dominated by the tunneling effect.fect.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.02a
• /
• pp.171.1-171.1
• /
• 2009

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.299-302
• /
• 2001

In this study, we are studied the electrical conduction and dielectric breakdown properties of insulating varnish. In order to analyze the molecular structure and physical properties of insulating varnishs, FT-lR was used. As the result, it can be confirmed that the peak of alcoholic group appeared in wavenumbers 3452[cm$\^$-1], the peak of =CH appeared in 3080[cm$\^$-1] and the peak of -CH appeared in 2919[cm$\^$-1] respectively. The following results were obtained from electrical properties of insulating varnish. The amplitude of current density was decreased by thickness increasing and the current density was effected by the thermal energy from external due to temperature increasing. In study temperature dependence of dielectric strength, the specimen of 10[$\mu\textrm{m}$] thickness was measurement from room temperature to 180[$^{\circ}C$]. It is confirmed that the temperature regions below 60[$^{\circ}C$] is due to electron avalanche breakdown and the temperature regions over 60[$^{\circ}C$] is due to free volume breakdown which makes electron movements easy.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.1
• /
• pp.152-162
• /
• 1988

In recent years, attention has been paid to the ceramic material next to metals and plastics due to its inherent characteristics, i.e., good hardness, resistance to heat and corrosion. Recently, various kinds of ceramic dielectrics have been developed for application in industry. It is of prime importance to know the thermophysical properties for wider use of these new materials. However, no extensive effort has been made for systematic measurement of the properties. In this paper, the dielectric constant of five different kinds of ceramic dielectrics ware measured. We call these samples as MgO.SiO$_{2}$, MgTiO$_{3}$, TiO$_{2}$, CaTiO$_{3}$, and BaTiO$_{3}$. Which are currently in commercial sue. The values of thermal dirrusivities, specific heats, and thermal conductivities of these ceramic dielectrics sere measured as a function of temperature ranging from room temperature to about 1300k.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12
• /
• pp.1136-1141
• /
• 2003

The primary insulation materials used in an oil filled transformer are kraft paper, wood, porcelain and oil. Modern transformers use chemically treated paper to improve its tensile strength and resistance to aging caused by immersion in oil. But these insulation papers are mainly aged by thermal stress. Over the life time of the insulation paper and oil, it is exposed to high temperatures, oxygen and water. Its interaction with the steel of the tank and core plus the copper and aluminium of the windings will eventually cause the chemical properties of the oil to decay. High temperature have an effect on mechanical strength of cellulous paper used in the layer insulation. We made two aging cells in which insulation papers and mineral oil are conducted to test thermal properties. It is measured dielectric strength, number of acid, moisture, etc. of insulation paper and oil aged in the aging cells.