• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.201-204
• /
• 2001

Rosen형 또는 적층 Rosen형과 같은 압전세라믹 변압기는 고전압, 고효율의 출력특성과 소형이라는 장점을 가지는 반면에, 온도에 따른 압전 특성의 변화가 심하다는 단점을 가진다. 이러한 이유로 압전 단결정과 같은 온도특성이 안정적인 재료를 이용한 변압기의 개발이 진 행되고 있다. 따라서, 본 연구에서는 온도계수가 낮은 $LiTaO_3$ 단 결정$(X-112^\circ\;Y)$을 이용한 압전변압기를 제작 그 특성을 시뮬레이션 및 실험으로 해석하였다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.337-338
• /
• 2010

LCD TV의 화면을 균등한 휘도로 표현하기 위해 기존의 구동회로는 다 채널의 LED를 정전류로 제어하는 DC/DC 컨버터가 각각 적용되었고, 이는 원가 상승 및 효율 저하의 원인이 되었다. 이를 해결하기 위하여 본 논문에서는 각 LED 채널에 적용되는 DC/DC 컨버터 없이 트랜스포머와 커패시터를 이용하여 모든 LED 채널의 정전류 제어가 가능한 고효율 저가격형 구동회로를 제안하고, 이에 대한 이론적 해석을 제시한다. 최종적으로 제안 회로를 46" LCD TV 백라이트에 적용하여 그 실험 결과를 바탕으로 제안 회로의 타당성을 검증한다.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.231-232
• /
• 2015

본 논문에서는 반도체 변압기(Solid State Transformer; SST)를 구성하는 단상 계통 연계형 인버터의 소신호 모델링과 이를 통한 효과적인 제어기 설계 방법을 제안한다. 평균화, 선형화 및 주파수 영역으로의 변환 단계를 거쳐 소신호 모델링을 수행하여 인버터 시스템의 전달함수를 얻을 수 있다. 이를 이용해 다양한 변동에 대한 인버터의 안정도와 동작 특성을 파악하고, 전압 제어기 및 전류 제어기를 설계하여 동작 영역에서 인버터의 안정적인 동작과 적절한 동특성이 확보되도록 한다. 본 논문에서 제안된 모델링과 제어 방법은 시뮬레이션을 통해 유효성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.2070-2071
• /
• 2007

본 연구에서는 변압기의 주 소음원인이 되는 120[Hz]와 240[Hz]및 360[Hz] 주파수에 대한 다중음/단일채널 적응 능동제어기법을 이용한 능동 제어시스템을 구성하였다. 이 능동 제어시스템을 이용하여 변압기에서 발생되어 나오는 소음을 저감시켰고 모의실험을 통해 소음이 감쇄되는 것을 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.145-146
• /
• 2018

본 논문에서는 넓은 입력전압 범위를 갖는 풍력발전기용 단상 무변압기형 PCS를 제안한다. 제안하는 풍력발전기용 PCS는 에너지 이용률과 고효율을 위하여 높은 승압비를 가지는 비절연 부스트 DC-DC 컨버터가 적용되었으며, 인버터의 공통모드 노이즈로 인한 누설전류를 저감시키기 위하여 바이폴라(Bipolar) 스위칭 방식을 적용하였다. 본 논문에서는 제안하는 풍력발전시스템의 타당성을 검증하기 위하여 9kW 시작품을 제작하여 실험하였다.

• The Journal of Information Systems
• /
• v.31 no.4
• /
• pp.01-23
• /
• 2022

Purpose This study aims to propose a deep learning-based fake review detection model by combining authors' linguistic features and semantic information of reviews. Design/methodology/approach This study used 358,071 review data of Yelp to develop fake review detection model. We employed linguistic inquiry and word count (LIWC) to extract 24 linguistic features of authors. Then we used deep learning architectures such as multilayer perceptron(MLP), long short-term memory(LSTM) and transformer to learn linguistic features and semantic features for fake review detection. Findings The results of our study show that detection models using both linguistic and semantic features outperformed other models using single type of features. In addition, this study confirmed that differences in linguistic features between fake reviewer and authentic reviewer are significant. That is, we found that linguistic features complement semantic information of reviews and further enhance predictive power of fake detection model.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.3
• /
• pp.199-206
• /
• 2023

This study utilizes deep learning algorithms to automatically classify construction waste into three categories: wood waste, plastic waste, and concrete waste. Two models, VGG-16 and ViT (Vision Transformer), which are convolutional neural network image classification algorithms and NLP-based models that sequence images, respectively, were compared for their performance in classifying construction waste. Image data for construction waste was collected by crawling images from search engines worldwide, and 3,000 images, with 1,000 images for each category, were obtained by excluding images that were difficult to distinguish with the naked eye or that were duplicated and would interfere with the experiment. In addition, to improve the accuracy of the models, data augmentation was performed during training with a total of 30,000 images. Despite the unstructured nature of the collected image data, the experimental results showed that VGG-16 achieved an accuracy of 91.5%, and ViT achieved an accuracy of 92.7%. This seems to suggest the possibility of practical application in actual construction waste data management work. If object detection techniques or semantic segmentation techniques are utilized based on this study, more precise classification will be possible even within a single image, resulting in more accurate waste classification

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.5
• /
• pp.10-24
• /
• 2007

In the dissertation, a power conversion system for fuel cell is composed of a PWM inverter with LC filter in order to convert fuel cell voltage to a single phase 220[V]. In addition, new insulated DC-DC converters are proposed in order that fuel cell voltage is boosted to 380[V]. In this paper, it requires smaller components than existing converters, which makes easy control. The proposed DC-DC converter controls output power by the adjustment of phase-shift width using switch $S_5\;and\;S_6$ in the secondary switch which provides 93-97[%] efficiency in the wide range of output voltage. Fuel cell simulator is implemented to show similar output characteristics to actual fuel cell. Appropriate dead time td enables soft switching to the range where the peak value of excitation current in a high frequency transformer is in accordance with current in the primary circuit. Moreover, appropriate setting to serial inductance La reduces communication loss arisen at light-load generator and serge voltage arisen at a secondary switch and serial diode. Finally, TMS320C31 board and EPLD using PWM switching technique to act a single phase full-bridge inverter which is planed to make alternating current suitable for household

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.569-577
• /
• 2014

From the year 2009, 3D Stereoscopic movies and TV have been spotlighted after the huge success of a movie called "AVATAR". Moreover, most of 3D movies & contents are created by mixing real-life shots & virtual animated pictures, such as "Robocop 3", "Transformer 4" as shown in 2014. However, the stereoscopic 3D video film shooting with a traditional stereoscopic rig camera system, takes much more time to set the rig system and adjust the system setting for proper film making which necessarily resulting in bigger cost. In fact, these problems have depreciated the success of Avatar as decreasing demand for 3D stereoscopic video shooting. In this paper, inherent problems of traditional stereoscopic rig camera system are analyzed, and as a solution for the problems, a novel implementations of single-lens optical stereoscopic 3D camera system is suggested. The new system can be implemented to a technology for separating two lights when even those lights passing through in the same optical axis. The system has advantages of adjusting the setting and taking video compared with traditional stereoscopic 3D rig systems. Furthermore, this system can acquire comfortable 3D stereoscopic video because of the good characteristics of geometrical errors. This paper will be discussed the single-lens stereoscopic 3D camera system using rolling shutters, it will be tested geometrical errors of this system. Lastly, other types of single lens stereoscopic 3D camera system are discussed to develop the promising future of this system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.3
• /
• pp.213-218
• /
• 2020

In this study, we propose a control algorithm to reduce the unbalanced characteristics of a three-phase system power caused by the unbalanced load of the AC electric railway. Then, we verify its performance through the design of a power compensator and experiments applying it. Like electric railway systems, a Scott transformer is applied, and the load and single-phase back-to-back converters are connected to the M-phase and T-phase outputs. The back-to-back converter monitors the difference in active power between the unbalanced loads in real-time and compensates for the power by using bidirectional characteristics. The active power is performed through PI control in the synchronous coordinate system, and DC link overall voltage and voltage balancing control are controlled jointly by M-phase and T-phase converters to improve the responsiveness of the system. To verify the performance of the proposed power compensation device, an experiment was performed under the condition that M-phase 5 kW and T-phase 1 kW unbalanced load. As a result of the experiment, the unbalance rate of the three-phase current after the operation of the power compensator decreases by 58.66% from 65.04% to 6.38%, and the excellent performance of the power compensator proposed in this study is verified.