• Communications for Statistical Applications and Methods
• /
• v.19 no.3
• /
• pp.459-469
• /
• 2012

This article proposes a couple of parallel implementations of the self-organizing network for normal mixtures. In principle, self-organizing networks should be able to be implemented in a parallel computing environment without issue. However, the network for normal mixtures has inherent problem in being operated parallel in pure sense due to estimating conditional expectations of the mixing proportion in each iteration. This article shows the result of the parallel implementations of the network using Java. According to the results, both of the implementations achieved a faster execution without any performance degradation.

• 한국사회정책
• /
• v.23 no.3
• /
• pp.49-77
• /
• 2016

The aim of this study is to reveal errors in the estimations on the nonstandard workers scale which have resulted from little consideration for bogus self-employment. Bogus self-employment means disguised employment relationships that are considered to be self-employed workers even though they have inherent subordination. The methods of previous studies estimate that the bogus self-employed workers are excluded from estimations because they are not workers in principle. We analyze the scale of the bogus self-employments using the empirical data [the Korean Welfare Panel of 2008-2013(six wave panel)] to re-estimate the scale of non-standard workers. In 2013, the year of the last wave, the percentage of the bogus self-employment was high, the proportion of them is 28.5% among self-employment without owning a place of business. Our results expect the number of contract workers from re-analysis would be over 740 thousand when reflecting on the predictive value in the actual number of paid workers. In conclusion, it is necessary to apply reasonable methods of analysis concerning the scope and scale of the nonstandard workers for the sake of coping with measures against the problem of nonstandard workers. The aim of this study is to reveal the estimation error on nonstandard workers' scale which are resulted from having no consideration for bogus self-employment. Bogus self-employment means disguised employment relationship that is considered as self-employment workers even though they have inherent subordination. The methods of previous researches' estimation on nonstandard workers have the problem that the bogus self-employment workers are excluded from estimation because they are not workers in principle.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.2
• /
• pp.38-45
• /
• 2018

Baekdudaegan is Korea's traditional geographic system which incorporates the mountains and water to constitute an organism. In this system, the mountain ranges of the Korean peninsula is categorized into one Daegan, one Jeonggan and thirteen Jeongmaek: a classification that follows the principle that 'a mountain range separates watercourse (山自分水嶺).' Among them, the scope of this study encompasses one Daegan and nine Jeongmaek which fall in South Korea. As for the methodology, this study interviewed the visitors to Baekdudaegan in South Korea and analyzed 2,519 responses. Among the interviewee, a very low proportion of 5.1% answered that they 'know' the traditional geographic system and those who 'know' Baekdudaegan were merely 39%. Only 11.8% said they 'know' Jeongmaek. Meanwhile, more than 60% answered that the natural environment of Baekdudaegan was 'well conserved,' and this can lead to the judgment that the environment is well conserved. Many answered that it was desirable to include Baekdudaegan in the curriculum, most effectively from the primary school, for promoting the awareness of Baekdudaegan. Currently, the traditional geological system is not included in the promulgated curriculum of the Ministry of Education. Therefore, the lessons from this study lead to a suggestion that the curriculum by the Ministry of Education shall allot courses on this traditional geological system. This policy will inculcate the identity of the Korean nationality and the fundamental concept of conservation by stimulating the affection to our territory and environment.

• Journal of the Korea Concrete Institute
• /
• v.20 no.1
• /
• pp.67-75
• /
• 2008

An engineered cementitious composite produced with slag particles (Slag-ECC) had been developed based on micromechanical principle. Base grain ingredients were properly selected, and then the mixture proportion was optimized to be capable of achieving robust tensile ductility in the hardened state. The rheological design is performed in the present study by optimizing the amount of admixtures suitable for self-consolidating casting and shotcreting process in the fresh state. A special focus is placed on the rheological control which is directly applicable to the construction in field, using prepackaged product with all pulverized ingredients. To control the rheological properties of the composite, which possesses different fluid properties to facilitate two types of processing (i.e., self-consolidating and shotcreting processing), the viscosity change of the cement paste suspensions over time was initially investigated, and then the proper dosage of the admixtures in the cement paste was selected. The two types of mixture proportion were then optimized by self-consolidating & shotcreting tests. A series of self-consolidating and shotcreting tests demonstrated excellent self-consolidation property and sprayability of the Slag-ECC. The rheological properties altered through this approach were revealed to be effective in obtaining Slag-ECC hardened properties, represented by pseudo strain-hardening behavior in uniaxial tension, allowing the readily achievement of the desired function of the fresh Slag-ECC. These ductile composites with self-consolidating and shotcreting processing can be broadly utilized for a variety of applications, e.g., in strengthening seismic resistant structures with congested reinforcements, or in repairing deteriorated infrastructures by shotcreting process.

• Korean Journal of Radiology
• /
• v.20 no.8
• /
• pp.1300-1310
• /
• 2019

Objective: To measure the diagnostic accuracy of percutaneous transthoracic needle lung biopsies (PTNBs) on the basis of the intention-to-diagnose principle and identify risk factors for diagnostic failure of PTNBs in a multi-institutional setting. Materials and Methods: A total of 9384 initial PTNBs performed in 9239 patients (mean patient age, 65 years [range, 20-99 years]) from January 2010 to December 2014 were included. The accuracy, sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of PTNBs for diagnosis of malignancy were measured. The proportion of diagnostic failures was measured, and their risk factors were identified. Results: The overall accuracy, sensitivity, specificity, PPV, and NPV were 91.1% (95% confidence interval [CI], 90.6-91.7%), 92.5% (95% CI, 91.9-93.1%), 86.5% (95% CI, 85.0-87.9%), 99.2% (95% CI, 99.0-99.4%), and 84.3% (95% CI, 82.7-85.8%), respectively. The proportion of diagnostic failures was 8.9% (831 of 9384; 95% CI, 8.3-9.4%). The independent risk factors for diagnostic failures were lesions ≤ 1 cm in size (adjusted odds ratio [AOR], 1.86; 95% CI, 1.23-2.81), lesion size 1.1-2 cm (1.75; 1.45-2.11), subsolid lesions (1.81; 1.32-2.49), use of fine needle aspiration only (2.43; 1.80-3.28), final diagnosis of benign lesions (2.18; 1.84-2.58), and final diagnosis of lymphomas (10.66; 6.21-18.30). Use of cone-beam CT (AOR, 0.31; 95% CI, 0.13-0.75) and conventional CT-guidance (0.55; 0.32-0.94) reduced diagnostic failures. Conclusion: The accuracy of PTNB for diagnosis of malignancy was fairly high in our large-scale multi-institutional cohort. The identified risk factors for diagnostic failure may help reduce diagnostic failure and interpret the biopsy results.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.709-716
• /
• 2005

The objective of this study is to develop a high ductile fiber reinforced mortar, ECC(Engineered Cementitious Composite) with using raw material commercially available in Korea. A single fiber pullout test and a wedge splitting test were employed to measure the bond properties in a matrix and the fracture toughness of mortar matrix respectively, which are used for designing mix proportion suitable for achieving strain-hardening behavior at a composite level. Test results showed that the properties tended to increase with decreasing water-cement ratio. A high ductile fiber reinforced mortar has been developed by employing micromechanics-based design procedure. Micromechanical analysis was initially peformed to properly select water-cement ratio, and then basic mixture proportion range was determined based on workability considerations, including desirable fiber dispersion without segregation. Subsequent direct tensile tests were performed on the composites with W/C's of 47.5% and 60% at 28 days that the fiber reinforced mortar exhibited high ductile uniaxial tension property, represented by a maximum strain capacity of 2.2%, which is around 100 times the strain capacity of normal concrete. Also, compressive tests were performed to examine high ductile fiber reinforced mortar under the compression. The test results showed that the measured value of compressive strength was from 26MPa to 34 MPa which comes under the strength of normal concrete at 28 days.

• Computers and Concrete
• /
• v.30 no.5
• /
• pp.311-321
• /
• 2022

The interfacial bond strength of partially encased composite (PEC) structure tends to 0, therefore, the cast-in-place concrete theoretically cannot embody better composite effect than the fabricated structure. A total of 12 specimens were designed and experimented to investigate the energy dissipation and damage of fabricated PEC beam through unidirectional cyclic loading test. Because the concrete on both sides of the web was relatively independent, some specimens showed obvious asymmetric concrete damage, which led to specimens bearing torsion effect at the later stage of loading. Based on the concept of the ideal elastoplastic model of uniaxial tensile steel and the principle of equivalent energy dissipation, the energy dissipation ductility coefficient is proposed, which can simultaneously reflect the deformability and bearing capacity. In view of the whole deformation of the beam, the calculation formula of energy dissipation is put forward, and the energy dissipation and its proportion of shear-bending region and pure bending region are calculated respectively. The energy dissipation efficiency of the pure bending region is significantly higher than that of the shear-bending region. The setting of the screw arbors is conducive to improving the energy dissipation capacity of the specimens. Under the condition of setting the screw arbors and meeting the reasonable shear span ratio, reducing the concrete pouring thickness can lighten the deadweight of the component and improve the comprehensive benefit, and will not have an adverse impact on the energy dissipation capacity of the beam. A damage model is proposed to quantify the damage changes of PEC beams under cyclic load, which can accurately reflect the load damage and deformation damage.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1149-1156
• /
• 2008

The principle of self clamping friction clutch is presented in this paper and the transmitted torque capacity is also calculated. In order to enlarge the friction force, a part of rotating force of driving side is converted to normal force of friction materials by clamping arm. The increased normal force of friction materials assures the large friction force and the transmitted torque capacity of clutch becomes large. The self clamping friction clutch is adopted in the tube type air pressure clutch and the condition of stability is investigated. It is proven that the inclined angle of clamping arm and the friction factor of friction materials are the essential elements in stability and torque capacity of self clamping friction clutch. The transmitted torque capacity of self clamping friction clutch is compared with air pressure clutch. The normal force of friction lining is magnified by 1/(1-k) and the transmitted torque capacity is also magnified with same proportion comparing with air pressure clutch. The larger the friction factor of friction lining, the larger the magnification factor. The longer the clamping arm, the smaller the magnification factor. It must be also noted that the value of k=${\mu}Y/X$ is the criterion of stability. If the value of k=${\mu}Y/X$ is greater than or equal to 1, the self clamping friction clutch is unstable and it can not be used as clutch.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.56-66
• /
• 2010

This study proposes a thesis of architectural concepts and visual dimension systems, and the comparison between steps of spatial formation and dimensional alteration. The second chapter, to form the basis of this study, explains the dimensional alterations and changes of fundamental notion of space. In the third chapter, history of space, architectural formations, and changes of the viewpoint are analyzed as objects of study. The forth chapter presents the interrelation between dimensional alteration and the transition in fundamental notion of space, demonstrating that modern architecture has been born from these cultural movements. Lastly, the fifth chapter suggests possibilities on further studies and the following conclusions: First, architectural spaces have been changed, in accordance with the changes of culture, art and the tools that regulate architectural design. Proportional regulations by two-dimensional tools and depth through three-dimensional drawings are created. Second, architectural spaces gained depth by recognizing movement and time that have induced formations to change, creating various aesthetic backgrounds and attempts. Third, the aesthetic background and cosmologic spatial concept have led the visualization and changes of architectural experience. It created the design tools and shapes originated in dynamism and vitality. Forth, diversification of fundamental spatial concepts has become palimpsest and complex, and been divided into four dimensions; expressional two-dimensional space, perspective three-dimensional space, forth-dimensional space of time and experience, and imagery space formed by body movement. Fifth, architecture has been influenced by the elevated viewpoint that understands the whole world as a space. It has evolved from the two-dimensional proportion principle, change of depth and vanishing point to multidimensional space of movement and time. Sixth, changes of fundamental notion of space have arisen from changes of visual dimensions in times. In other words, space has been developed from two-dimensional space to multidimensional space by accepting visual dimension, grasping distance, direction, depth, height, velocity, movement, gravity, power and structure.

• Journal of the Korean Society of Costume
• /
• v.65 no.3
• /
• pp.62-75
• /
• 2015

The purpose of this study is to examine how fine art is received in fashion, and to contribute to the development of a creative fashion culture. In order to do this examination, this study focuses on the formative ideas of De Stijl which appeared in the early 20th century. In addition, this study presents examples of today's fashion that still reflects the formative ideas of De Stijl. The De stijl movement did not last for a long time, but it has had significant influence on modern art, and has been a source of inspiration to fashion designers since the Mondrian look was presented by Yves Saint Laurent in 1965. The study on the basis of De Stijl such as Neo-Plasticism of Piet Mondrian and Elementalism of Theo van Doesburg, has been conducted in this study. As a result, this study presents formative characteristics of the De Stijl group in fashion as follows: First, contemporary fashion designers have searched for proportion and thickness of lines and the side split using lines, a stylistic trait of an artist in the De Stijl group. Second, color scheme defined by the De Stijl group has been applied with modification to contemporary fashion. Modification and selective choice of the limited colors are for a contemporaneous style. Third, formative ideas of De Stijl, which strives to achieve the vision of Utopia, has turned up in contemporary fashion as a simple and minimal silhouette. Contemporary fashion has enhanced their aesthetic value by deriving not only a superficial expression but also plastic principle and philosophy from De stijl. It can be regarded as the fashion's ideal way to embrace style of art and it might be so described as a key to edifying artistic and creative attributes of fashion.