• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.455-462
• /
• 1999

In this case, we have selected a representative location in the vicinity of large underground structures where they cross a runway and taxiway: measured the effects of the dynamic hammer compaction by distance: analyzed the measured results over a period of time and for many frequencies: and determined the maximum anticipated particle velocity (PV) of vibration, caused by the dynamic hammer, verses distance. In addition, while compacting the hydrofill, we reviewed the impact of subsurface particle velocities, caused by hammer compaction methods, upon newly constructed reinforced concrete underground structures. We have implemented the appropriate technical standards after reviewing domestic and international technical standards concerning allowable vibration velocity appropriate In the many types of underground structures at Inchon International Airport.

• Structural Engineering and Mechanics
• /
• 제10권3호
• /
• pp.197-209
• /
• 2000

The effects of weight and axial inertia of a beam are taken into account for studying the nonlinear vibration of the Timoshenko beam due to external loads. The combination of Galerkins method and Runge-Kutta method are employed to obtain the dynamic responses of the beam. A concentrated force and a two-axle vehicle traversing on the beam are taken as two examples to investigate the response characteristics of the beam. Results show that the effect of axial inertia of the beam increases the fundamental period of the beam. Further, both the dynamic deflection and the dynamic moment of the beam obtained with including the effect of axial inertia of the beam are greater than those of the beam without including that effect of the beam.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1995년도 춘계학술대회논문집; 전남대학교, 19 May 1995
• /
• pp.121-128
• /
• 1995

The results are summarized as what follows: 1) The modeling of thin beams, which is a continuous system, into a two DOF system yields satisfactory results for the chaotic vibrations. 2) The concept of "natural forcing function" derived from the eigenfunction of the bifurcation mode is very useful for the natural responses of the system. 3) Among the perturbation techniques, HBM is a good estimate for the response when the geometry of motion is known. 4) It is known that there exist periodic solutions of coupled mode response for somewhat large damping and forcing amplitude, as well as weak damping and forcing. 5) The route-to-chaos related with lateral instability in thin beams is composed of period-doubling and quasiperiodic process and finally follows discontinuous period-doubling process. 6) The chaotic vibrations are verified by using Poincare maps, FFT's, time responses, trajectories in the configuration space, and the very powerful technique Lyapunov characteristics exponents.exponents.

• 한국지진공학회논문집
• /
• 제22권2호
• /
• pp.55-62
• /
• 2018

In this study, natural period formular is presented for a RC shear wall structure with H-, T-, and L-shaped wall sections. The natural period formular proposed by Goel and Chopra and adopted in ASCE 7-10 was modified by using the ratio of the flange and web wall area. The natural periods of structures with H-shaped wall were numerically obtained, the results indicated that the ASCE 7-10 could not consider the natural period variation according to the length of the flange wall, but the proposed formula could do. Especially, ASCE 7-10 estimated much longer periods than eigenvalue analysis, and this implies that conservative seismic design is difficult. The periods by eigenvalue analysis exist between the upper and lower bounds given by the proposed formula, and conservative design is possible by using the proposed lower bound value. In order to verity the effectiveness of the proposed method, actual residential buildings with various types of flange walls are considered. Ambient vibration tests, eigenvalue analyses, and nonlinear dynamic analyses were conducted and the periods were compared with the values by ASCE 7-10 and the proposed formula. The results showed that the proposed formula could estimate more accurately the periods than ASCE 7-10.

• 한국지반환경공학회 논문집
• /
• 제16권7호
• /
• pp.35-42
• /
• 2015

그라우팅 공법은 지반개량과 안정화에 널리 사용되어 왔으며 초기에는 대부분이 지하수를 차단하거나 조절하기 위해 사용되었고 최근에는 지반의 강화와 구조물의 보수 등 그 용도가 날로 증가하고 있다. 이러한 장점에도 불구하고 지금까지의 그라우팅 공법은 흙 입자 사이의 간극이 좁을 경우 중력식으로는 그라우트재의 침투가 불확실한 경우가 있으며, 주입압을 통하여 주입할 경우 인근 지반의 이완으로 인한 문제점들이 발생할 수 있다. 이에 대한 대안으로 최근 일정한 진폭과 주기를 갖는 진동주입공법이 개발되고 있으며, 이 공법은 정압주입 형태에 비해 그라우트재의 침투성 증대효과가 있는 것으로 보고되고 있다. 이에 본 연구에서는 단주기 진동에너지를 가하는 진동그라우팅의 보강효과를 구명하고자 진동주기, 진동시간 및 지반조건 등을 변화시켜 가며 그라우트재의 강도증진 효과, 확공효과, 지반보강효과 및 암반 절리면에서의 침투특성을 평가하였다. 실험결과 지반조건이 느슨한 경우 진동그라우팅 시 무진동 그라우팅에 비해 압축강도와 확공특성이 개선되는 것을 확인하였으며, 침투속도도 증가함을 확인할 수 있었다.

• 화약ㆍ발파
• /
• 제19권1호
• /
• pp.11-18
• /
• 2001

This is a case history on design and cnostruction of tunnel for under passing an underground transformer substation. The original construction plan was cut & cover method to avoid blasting vibrations and displacements of facilities during the construction stages. But this plan was changed to tunnel because of the difficulties from construction period, cost and the required relocation site. As a results of tunnel construction, the relocation of transformer substation and replacements of transmission cables were not necessary. Therefore about 10 months of construction period and 3.5 billion wonts of construction cost were saved. Additionally, quantitative criterion for blasting was provided through the results of blasting vibration analysis.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.105-108
• /
• 2006

should be in This paper presents review on human comfort criteria in major codes and standards for tall buildings. In general, human comfort criteria of tall buildings have been used by magnitude of wind-induced acceleration response. Two different indexes in determination of the magnitude have been used: the peak value which occurs during a period of time and the rms value averaged over this same period. These distinctive acceleration indexes are discussed in detail and each criterium was reviewed and compared. The distinctions arisen because of the different wave forms, or acceleration signatures were addressed. It is described that which index of acceleration should be adopted in establishment of Korean human comfort criteria. In addition, some arguments from a technical standpoint that favor the use of each index are presented.

• 로봇학회논문지
• /
• 제12권3호
• /
• pp.279-286
• /
• 2017

In this paper, we proposed a method to determine the acceleration/deceleration time of the motion for reducing the residual vibration caused by the resonance of the robot in the high-speed motion. The relationship between the acceleration/deceleration time and the residual vibration was discussed for the trapezoidal velocity profile by analyzing the time when the jerk happens. The natural frequency of the robot can be estimated in advance through the dynamics simulation. The simulation and experiment for both cases where the moving distance of the robot is long enough and the distance is short, are implemented in the 1-DOF linear robot. Simulation and experimental results show that when the acceleration/deceleration time is a multiple of the vibration period, the settling time and the amplitude of the residual vibration become less than when the time is not a multiple.

• 대한토목학회논문집
• /
• 제39권3호
• /
• pp.419-429
• /
• 2019

시험발파를 통해 제주 남부지역(현무암과 클링커 층상구조 지반)의 지반진동 특성을 분석하였다. 지반진동의 주요 성분을 파악하고 지반진동추정식을 도출함으로써 제주 남부지역의 지반진동의 전파 특성을 국내 설계지침과 비교하였다. 층상구조 지반에서의 지반진동은 근거리에서는 진동의 크기가 작으나 원거리로 갈수록 지반진동의 감쇠가 적어 진동에너지를 멀리까지 전달하는 것으로 나타났다. 그리고 주파수는 저주파수 대역으로 확인되었다. 이는 공극이 큰 클링커층이 고주파의 발파에너지 탄성파를 파형의 주기가 긴 저주파 형태로 바꿔 전달하기 때문으로 판단된다. 또한, 기반암이 다른 지역과의 지반진동을 비교하여 설계지침의 한계를 확인함으로써, 지역 특성이 반영된 설계 지반진동추정식 개발의 필요성을 제시하였다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.83-90
• /
• 2013

This paper describes advanced brushless DC motor drive without position sensor for home appliances with compressor to reduce the pulsating currents and vibration. The proposed method limits the motor currents during starting period and reduces commutation torque ripple during sensorless operating period. Experimental results show that the proposed method implemented in an inverter for a BLDC motor driven compressor considerably reduces not only the pulsating currents but also vibration of the home appliances.