• 한국항공우주학회지
• /
• 제38권10호
• /
• pp.1012-1019
• /
• 2010

본 논문에서는 다중표적 비행시험을 위한 비행 자료처리 시스템이 설계되었다. 비행자료 처리를 위해 표적그룹 처리, 자료융합 처리 및 자료연동 처리가 수행 되었으며, 자료융합 필터로서 집중형 칼만필터와 연합형 칼만필터를 설계하였다. 특히 집중형 필터에 레이더의 SNR과 추정기법을 적용하여 비행체의 저고도 계측을 개선하였다. 개발된 시스템을 다중표적 비행시험에 적용한 결과, 저고도 및 초기구간에서 개선된 비행궤적을 확인할 수 있었다.

• 한국항공우주학회지
• /
• 제39권4호
• /
• pp.378-384
• /
• 2011

나로호 비행시험 동안 화염의 특성과 이로 인한 발사대의 영향을 측정하기 위해서 발사패드 및 화염유도로에 다양한 센서들을 설치하였고, 파라미터 측정시스템은 이러한 비행시험 데이터를 수집을 담당하고 있다. 측정 시스템 구성과 센서 위치 및 데이터 수집절차와 같은 측정 방법론을 논문에 기술하였다. 그리고 본 논문에서는 1차와 2차 비행 시험 데이터를 비교하였고, 측정 데이터 특성에 대해서 설명하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권3호
• /
• pp.425-436
• /
• 2015

This paper presents the procedures used for estimating the stability and control derivatives of a general aviation canard aircraft from flight data. The maximum likelihood estimation method which accounts for both process and measurement noise was used for the flight data analysis of a four seat canard aircraft, the Firefly. Without relying on the parameter estimation method, several aerodynamic derivatives were obtained by analyzing the steady state flight data. A wind tunnel test, a flight test of a 1/4 scaled remotely controlled model aircraft, and the prediction of aerodynamic coefficients using the USAF Stability and Control Digital Data Compendium (DATCOM), Advanced Aircraft Analysis (AAA), and Computer Fluid Dynamics (CFD) were performed during the development phase of the Firefly and the results were compared with flight determined derivatives of a full scaled flight prototype. A correlation between the results from each method could be used for the design of the canard aircraft as well as for building the aerodynamic database.

• 한국항공우주학회지
• /
• 제41권1호
• /
• pp.10-16
• /
• 2013

본 논문에서는 풍동 실험을 통해 취득한 소음측정 결과에서 실제 비행에 기체에서 발생되는 소음을 예측하는 과정에 대하여 다루었으며 정지된 소음원을 비행하는 것과 같은 상태로 시뮬레이션 할 수 있는 방법에 대하여 소개하고 실험을 통하여 검증하였다. 또한 국제민간항공기구(이하 ICAO)에서 규정한 절차에 따라 틸트로터 항공기 및 무인항공기의 환경소음을 평가할 수 있는 방안을 제시하였다. 제시한 평가 방안을 검증하기 위해서 풍동실험과 비행시험에 대한 소음실험 시뮬레이션 프로그램을 구성하였으며 7kg급 무인항공기를 통한 풍동 실험 및 비행 실험을 수행하였으며 풍동 실험 결과로부터 비행 상태의 소음예측이 가능하다는 것을 확인 할 수 있었다.

• 한국항공운항학회지
• /
• 제18권4호
• /
• pp.21-29
• /
• 2010

The main purpose of this study is to obtain linear models for the design of automatic flight controller in order to operate the Light Sport Aircraft as unmanned air vehicle. Flight test equipments installed on the aircraft to acquire flight test data are described and maneuvers for practical speed calibration are introduced. Parameters for the linear models of lateral and longitudinal motion are estimated by the Output error method as well as trim data analysis using the flight test data. Simulated data using the estimated parameters is shown to agree well with the measurement data. Estimated parameters obtained for several flight conditions can be used to improve the aerodynamic database of the simulation program.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권2호
• /
• pp.238-249
• /
• 2012

Flight test of flapping micro air vehicles (FMAVs) is carried out using an instrumented measurement system to obtain various engineering parameters and hence to assess the flight performance of the vehicles through the data investigation. An indoor flight test facility equipped with a motion capture system and tracking cameras is used for the work presented in this paper. Maneuvers including straight-level flight, ground flapping, takeoff and landing are tested. Spatial position and orientation data are obtained from the retro-reflective tracking markers attached to the vehicles. Subsequent test analysis is carried out by generating performance parameters from raw data and then assessing the flight performance by comparison of the vehicles. The main findings of this work confirm that the test method and procedures presented here enable the systematic numerical data measurement and assessment of the flying performances of these vehicles, and show the applicability for the test and evaluation of general flapping MAVs.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1659-1662
• /
• 1997

The objective of this paper is to estimate the aerodynamic derivatives of a single turbo-prop aircraft at a specified flight condition for the best deduction of the dynamic characteristics using modified maximum likelihood estimation method whcih is known to be unbiased, efficient, and consistent. The flight test data necessary to the estimation of aerodynamic derivatives is obtained by implementing the six degree of freedom nonlinear flight simulation to consider the effects of several control input types, control deflection amplitudes, and intensity of turbulence. The simulated data is added with the measurement noise, which is regarded as the actual flight test data.

• International Journal of Aerospace System Engineering
• /
• 제5권1호
• /
• pp.9-18
• /
• 2018

The longitudinal flight parameters of a light airplane are estimated from flight test data by use of the output error method. The reliability of the flight test measurement is examined in engineering judgment, scatter and Cramer-Rao bound, which turns out to be satisfactory with minor defects. Estimated parameter values are validated by comparing the simulated responses with the ones from actual flight tests. The FTD(Flight Training Device) of a light airplane turns out to satisfy the qualification of FAA Level 5 FTD in longitudinal motion. All the necessary practices for generation of high-fidelity data in longitudinal motion of a light aircraft are successfully performed in this study.

• 제어로봇시스템학회논문지
• /
• 제4권1호
• /
• pp.38-44
• /
• 1998

The modified maximum likelihood estimation method is used to estimate the nondimensional aerodynamic derivatives of a single turbo-prop aircraft at a specified flight condition for the best deduction of the dynamic characteristics. In wind axes the six degree of freedom equations are algebraically linearized so that the linear state equation contains aerodynamic derivatives in a state-space form and is used in the maximum likelihood method. The simulated data added with the measurement noise is used as a flight test data which is necessary to the estimation of nondimensional aerodynamic derivatives. It is obtained by implementing the 6-DOF nonlinear flight simulation. In the flight simulation, the effects of several control input types, control deflection amplitudes, and the turbulence intensities on the statistical convergence criteria are also examined and quantitative analysis of the results is discussed.

• 한국항공운항학회지
• /
• 제18권2호
• /
• pp.1-8
• /
• 2010

In order to determine the possibility of using NDGPS signals for flight operations, in-flight measurements of signals transmitted from various ground reference stations(RS) were conducted along the air routes of South Korea. Signal strength and signal to noise ratio(SNR) data were collected along domestic flight routes and recorded with time. By using three-dimensional geographical position data of the aircraft, signal strength data of en-route position were calculated and used to obtain scatter-plot of signal strength. These results were used to outline the effective coverage and field strength hemispheres of the selected DGPS signals.