• Journal of the Korean earth science society
• /
• v.21 no.2
• /
• pp.159-167
• /
• 2000

We tested the randomness and estimated the degree of concentration for the earthquake occurrence in the Korean Peninsula by using the statistical methods for spatial data. For the randomness test, we applied both of the test statistics based method and the empirical distribution based method to the both of historical and instrumental seismicity data. It was found that the earthquake occurrences for historical and instrumental seismicity data are not random and clustered rather than scattered. A nonparametric density estimation method was used to estimate the concentration degree in the Peninsula. The earthquake occurrences show relatively high concentration on Seoul, Choongnam, Chonbook and Kyungbook areas for the historical seismicity data. Also,'L" shaped concentrations connecting Whanghaedo -the coast of Choongnam -the inland of Kyungbook area are revealed for the instrumental seismicity data.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.4
• /
• pp.283-305
• /
• 2001

The purpose of this study was to analyze the stress distribution of condylar regions and edentulous mandible with implant-supported cantilever prostheses on the certain conditions, such as amount of load, location of load, direction of load, fixation or non-fixation on the condylar regions. Three dimensional finite element analysis was used for this study. FEM model was created by using commercial software, ANSYS(Swanson, Inc., U.S.A.). Fixed model which was fixed on the condylar regions was modeled with 74323 elements and 15387 nodes and spring model which was sprung on the condylar regions was modeled with 75020 elements and 15887 nodes. Six Br${\aa}$nemark implants with 3.75 mm diameter and 13 mm length were incorporated in the models. The placement was 4.4 mm from the midline for the first implant; the other two in each quardrant were 6.5 mm apart. The stress distribution on each model through the designed mandible was evaluated under 500N vertical load, 250N horizontal load linguobuccally, buccal 20 degree 250N oblique load and buccal 45 degree 250N oblique load. The load points were at 0 mm, 10 mm, 20 mm along the cantilever prostheses from the center of the distal fixture. The results were as follows; 1. The stress distribution of condylar regions between two models showed conspicuous differences. Fixed model showed conspicuous stress concentration on the condylar regions than spring model under vertical load only. On the other hand, spring model showed conspicuous stress concentration on the condylar regions than fixed model under 250N horizontal load linguobuccally, buccal 20 degree 250N oblique load and buccal 45 degree 250N oblique load. 2. Fixed model showed stress concentration on the posterior and mesial side of working and balancing condylar necks but spring model showed stress concentration on the posterior and mesial side of working condylar neck and the posterior and lateral side of balancing condylar neck under vertical load. 3. Fixed model showed stress concentration on the posterior and lateral side of working condylar neck and the anterior and mesial side of balancing condylar neck but spring model showed stress concentration on the anterior sides of working and balancing condylar necks under horizontal load linguobuccally. 4. Fixed model showed stress concentration on the posterior side of working condylar neck and the posterior and lateral side of balancing condylar neck but spring model showed stress concentration on the anterior side of working condylar neck and the anterior and lateral side of balancing condylar neck under buccal 20 degree oblique load. 5. Fixed model showed stress concentration on the anterior and lateral side of working condylar neck and the posterior and mesial side of balancing condylar neck but spring model showed stress concentration on the anterior side of working condylar neck and the anterior and lateral side of balancing condylar neck under buccal 45 degree oblique load.. 6. The stress distribution of bone around implants between two models revealed difference slightly. In general, magnitude of Von Mises stress was the greatest at the bone around the most distal implant and the progressive decrease more and more mesially. Under vertical load, the stress values were similar between implant neck and superstructure vertically, besides the greatest on the distal side horizontally. 7. Under horizontal load linguobuccally, buccal 20 degree oblique load and buccal 45 degree oblique load, the stress values were the greatest on the implant neck vertically, and great on the labial and lingual sides horizontally. After all, it was considered that spring model was an indispensable condition for the comprehension of the stress distributions of condylar regions.

• Journal of Mechanical Science and Technology
• /
• v.15 no.9
• /
• pp.1311-1318
• /
• 2001

It is necessary to diagnose accurately the characteristics of soot formation and oxidation in a diesel engine. Whereas past measurement techniques for soot concentration give limited information for soot, laser-based two-dimensional imaging diagnostics have a potential to provide temporally and spatially superior resolved measurements of the soot distribution. The technique using laser sheet beam has been applied to an optically accessible diesel engine for the quantitative measurement of soot. The results provided the information for reduction of soot from the diesel engine. Both LIS (Laser Induced Scattering) and LII (Laser Induced Incandescence) techniques were used simultaneously in this study. The images of LIS and LII showed the quantitative distribution of the soot concentration in the diesel engine. In this study, several results were obtained by the simultaneous measurements of LIS and LII technique. The diameter and number density of soot in combustion chamber of the test engine were obtained from ATDC 20 degree to 110 degree. The soot diameter increased about 37% between ATDC 20 degree and 110 degree. The number density of soot, however, decreased significantly between ATDC 40 degree and 70 degree.

• Journal of Korea Port Economic Association
• /
• v.37 no.1
• /
• pp.103-119
• /
• 2021

Ports in Korea have been increasing in terms of volume while they have performed functions and roles such as industrial ports in promoting industries of their hinterlands as well as commercial ports supporting imports and exports. Nevertheless, specialization degree is different from port to port by cargo type and the changes in cargo volume. This study aims to analyze the structural changes and the degree of concentration and specialization by cargo type and port between 2001 and 2020. Top 10 ports were analyzed in terms of traffic volume by categorizing liquid, dry, general cargo and containers. HHI(Herfindahl-Hirschman Index), LQ(Location Coefficient), and shift-share analysis were employed in order to identify the degree of concentration, specialization and changes in cargo volume by port and cargo type. As a result of the analysis, the degree of port concentration and specialization for each cargo of 4 categories have maintained a high level, and no significant difference were found in fluctuations over the past 20 years. As a result of calculating the flucation of cargo volume through the shift-share analysis, the growth rate of liquid cargo was high in Yeosu Gwangyang Port, Pyeongtaek Dangjin Port in dry cargo, and Busan Port in general cargo and container ports. The result implies that it is not expected that the structural changes including degree of cargo concentration, specialization and relative fluctuation of cargo volume is significant in Korean ports in the future since the effects of economies of scale and clustering were achieved to the great degree.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.75-81
• /
• 2003

In this paper, the study of effects of flow variables on flame structure and NOx emission concentration was performed in co-axial laminar partially premixed methane/air flames. the objectives are to reveal its effect as parameters were varied and to understand the correlation between flame structure and NOx emission characteristics in the reaction zone. equivalence ratio(${\Phi}$), fuel split degree(${\sigma}$), and mixing distance(x/D) were defined as a premixing degree and varied within $1.36{\sim}3.17$(equivalence ratio), $50{\sim}100$(fuel split degree), and $5{\sim}20$(mixing distance). the image of $OH{\ast}$ and $CH{\ast}$, and NOx concentration were obtained with an ICCD camera and a NOx analyzer. additionally the maximum intensity location of $OH{\ast}$ chemiluminescence and $CH{\ast}$ chemiluminescence were measured to compare each flame structures. In conclusion flame structure and NOx emission characteristics were changed from diffused to premixed flame when mixing degree was on the increase. the main effect on flame structure and NOx production was at first equivalence ratio(${\Phi}$), and next fuel split degree(${\sigma}$), and finally mixing distance(x/D).

• Journal of Power System Engineering
• /
• v.11 no.4
• /
• pp.26-31
• /
• 2007

Recently, study on the improvement of combustion performance for the diesel engine by using the impinging spray in the combustion chamber has been actively studied. The purpose of this study is to examine the variation of exhaust emission between the trial engine with impinging plate and the prototype engine in accordance with change of fuel injection timing and fuel injection pressure. The concentration of nitrogen oxide of trial engine decreased more than 50% compared to prototype engine. However, smoke of trial engine indicated very high concentration compared to prototype engine. The effect of fuel injection timing on the nitrogen oxide and smoke indicated different results, that is, the concentration of nitrogen oxide decreased as the degree of fuel injection start become slower, whereas the concentration of smoke decreased as the degree of fuel injection start become faster.

• Journal of Environmental Science International
• /
• v.14 no.3
• /
• pp.327-333
• /
• 2005

The performance of ozone contactor in ozone-BAC advanced water treatment process was evaluated by the degree of decomposition of organic matters. The degree was measured by the analyses of $UV_{254}$ absorbance and the concentrations of DOC and BDOC for the sand filtered water and the ozone treated water, respectively. In addition, the ozone concentration in the contactor, required for the maximum BDOC concentration, was selected as the optimum concentration, and the appropriate residential time of ozone treated water in a reservoir was recommended based on the residual ozone concentration in the treated water. The following results were obtained from the pilot scale experiments. By ozonation $UV_{254}$ absorbance was decreased, and BDOC concentration was increased. The change of DOC concentration by ozonation was negligible, but the excess input of ozone resulted in the removal of the small amount of BDOC by complete oxidation. The optimum ozone concentration was 0.58mg $O_3/mg$ DOC. In order to remove residual ozone, 20minutes of the residential time were enough after ozonation.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.116-124
• /
• 2020

The advantage of the distance learning universities based on the 4th Industrial Revolution is that anyone can conveniently take lectures anytime, anywhere on the web. In addition, research has been actively conducted on the effect of light color and temperature control upon student performance during online classes. However, research on how the conditions of subjects, lighting colors, and music selection improve the degree of a student's concentration during online lectures has not been completed. To solve these problems in this paper, we have developed automatic analysis system SW for the weak subjects of learners by applying intelligent analysis algorithm, have proposed and simulated music therapy and art therapy. Moreover, It proposed in this paper an algorithm for an automatic analysis system, which shows the weak subjects of learners by adopting intelligence analysis algorithms. We also have presented and simulated a music therapy and art therapy algorithms, based on the blended learning, in order to increase students concentration during lecture.

• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.4
• /
• pp.59-66
• /
• 2011

This study aims to understand the degree of inequality of surveyed rural amenity resources according to resources and region in basic self governing body by estimating the Gini Coefficient and Lorenz Curve. Case Study was performed in Sunchang basic self governing body which full survey of rural amenity resources was completed. The Gini Coefficient was applied to measure the concentration of amenity resources in 11 Eup-Myun regions, Sunchang county of Jeonbuk province. The results demonstrate significantly different variation according to Eup-Myun regions and amenity variables. This result would be used as a basic data for rational rural planning based on amenity resources through identifying distributional concentration of rural amenity resources in basic self governing body.

• KDI Journal of Economic Policy
• /
• v.38 no.1
• /
• pp.53-70
• /
• 2016

This paper examines market concentration and its effect on competition in the Chinese commercial banking market. This study also investigates how changes in competition have affected the financial stability of Chinese commercial banks. To test the competitive conditions, we obtained the H statistic of the Panzar-Rosse model from a revenue function equation. The degree of financial stability is estimated by the Z-score formula. The Chinese banking industry has become an increasingly less concentrated market with an increased number of banks. Along with a decreased market concentration, competition in the Chinese banking industry has improved moderately. However, its market structure is still far from a competitive market. An individual bank's ability to earn higher markup or charge a higher net interest margin contributes to its financial soundness, although a higher degree of market concentration may have negative effect on the financial stability of the entire banking system.