• Animal Systematics, Evolution and Diversity
• /
• 제14권1호
• /
• pp.51-57
• /
• 1998

완도산 등줄쥐의 분류학적 위치를 재검토하기 위해, 한국의 8개 지역에서 채집한 등줄쥐(Apodemus agrarius)의 31개 형태적 형질들을 다변량분석방법으로 분석하였다. 두 군으로 나누어 졌는데, 6개 지역(태백산, 월악산, 청주, 지리산, 군산, 진도)의 작은 형과 2개 지역(완도, 제주도)의 큰 형이었다. 6개 지역의 작은 형은 Thomas(1908)가 밝힌 대로 A. a. coreae이고, 제주도 지역의 큰 형은 Johnson과 Jones(1955)이 이 기재한 대로 A. a. chejuensis임이 확이되었다. 뿐만 아니라, 완도의 큰형은 Joh(1989)가 제안한대로 A. a. chejuensis임도 확인되었다.

• 한국유체기계학회 논문집
• /
• 제2권4호
• /
• pp.40-47
• /
• 1999

A hot water layer (HWL hereinafter) was installed at the depth of 1.2 m from the pool surface to reduce the radiation level at the pool top. After the HWL system was improved by the replacement of the filter with the Ion Exchanger to capture the Na-24, to purify the pool water of HWL and finally to reduce the radiation at the pool top. It was confirmed by the performance test of the pump and the measurement of the pressure difference through the Ion Exchanger and the strainer, that the flow characteristics of HWL system was not adversely affected after the system modification. Also the flow analysis using the pressure loss coefficients of the Ion Exchanger and strainer, calculated by the Darcy formula, could predict the flow variations by pressure changes within $10\%$ error in comparison with the field test results. It was also confirmed that HWL was maintained with the depth of 1.2 m from the pool surface because each electric water heater was electrically and thermodynamically maintained at 30 kW and the temperature of HWL was maintained with $5^{\circ}C$ higher temperature than that of pool water. Finally, it was confirmed that the pool top radiation was saturated and stabilized below 10000 nG/hr within 24 hours as the ion exchanger captured the main nucleus, Na-24 and purified the pool water of HWL.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.69-69
• /
• 2010

The research is the structural and optical characteristics of the Cadmium Sulfide(CdS) film, nanowires and nanobelts grown on the $Al_2O_3$ substrate using the vapor phase epitaxy method. The field-emission scanning electron microscopy(FE-SEM) were used to identify the shape of the surface of the nanostructures and x-ray diffraction(XRD) and transmission electron microscopy (TEM) were used to evaluate the structural characterisitcs. As a result, the XRD was confirmed the CdS peak and the substrate peak and TEM showed single crystals with wurtzite hexagonal structure on the nanostructures. As for the optical characteristic of the nanostructures, photoluminescence(PL) and micro-raman spectrum were measured. The PL measurements confirmed the emission peak related bound exciton to neutral donor($D^0X$) peak and free exciton(FX) peak. The micro-raman spectrum showed that the peak of the nanostructures were similar to the pure crystalline CdS peak and each peak were overtone of LO phonon of the hexagonal CdS of the longitudinal optical(LO) phonon mode. Therefore, it is confirmed that the CdS nanostructures grown in this research have superior crystallinity.

• 한국정보시스템학회지:정보시스템연구
• /
• 제32권2호
• /
• pp.109-135
• /
• 2023

Purpose This study is based on previous studies related to the function and operating system of the project management system for efficient project management. The purpose of the study is, first, to find out how the project performance is affected by the utilization of the project management system and the involvement of the PMO. Second, the mediating effect of implementing integrated management between the project management system and project performance is to be demonstrated. Design/methodology/approach Based on previous studies related to project management, this study designed a research model by integrating functional factors derived from project management system design studies, integrated management factors, and factors derived from PMO function studies. Findings As a result of the empirical analysis, this study first confirmed that high utilization of the project management system and high involvement of the PMO are factors that affect project performance. In addition, it was confirmed that the establishment of the system and the introduction of PMO do not guarantee project performance. Second, it was confirmed that the execution of integrated management has a mediating effect between the system and the project performance, and that the high utilization of the system has a positive effect on the mediating effect.

• 전기학회논문지P
• /
• 제57권2호
• /
• pp.79-83
• /
• 2008

In this paper, we introduced a LIF measurement method and summarized the theoretical side. When an altered wavelength of laser and electric power, lamp applied electric power, we measured the relative density of the metastable state in mercury after observing a laser induced fluorescence signal of 404.8nm and 546.2nm, and confirmed the horizontal distribution of plasma density in the discharge lamp. Due to this generation, the extinction of atoms in a metastable state occurred through collision, ionization, and excitation between plasma particles. The density and distribution of the metastable state depended on the energy and density of plasma particles, intensely. This highlights the importance of measuring density distribution in plasma electric discharge mechanism study. The results confirmed the resonance phenomenon regarding the energy level of atoms along a wavelength. change, and also confirmed that the largest fluorescent signal in 436nm, and that the density of atoms in 546.2nm ($6^3S_1{\to}6^3P_2$) were larger than 404.8nm ($6^3S_1{\to}6^3P_2$). According to the increase of lamp applied electric power, plasma density increased, too. When increased with laser electric power, the LIF signal reached a saturation state in more than 2.6mJ. When partial plasma density distribution along a horizontal axis was measured using the laser induced fluorescence method, the density decreased by recombination away from the center.

• 한국해양공학회지
• /
• 제35권3호
• /
• pp.229-237
• /
• 2021

A numerical hydrodynamic performance analysis of the pitch-type multibody wave energy converter (WEC) is carried out based on both linear potential flow theory and computational fluid dynamics (CFD) in the unidirectional wave condition. In the present study, Salter's duck (rotor) is chosen for the analysis. The basic concept of the WEC rotor, which nods when the pressure-induced motions are in phase, is that it converts the kinetic and potential energies of the wave into rotational mechanical energy with the proper power-take-off system. This energy is converted to useful electric energy. The analysis is carried out using three WEC rotors. A multibody analysis using linear potential flow theory is performed using WAMIT (three-dimensional diffraction/radiation potential analysis program), and a CFD analysis is performed by placing three WEC rotors in a numerical wave tank. In particular, the spacing between the three rotors is set to 0.8, 1, and 1.2 times the rotor width, and the hydrodynamic interaction between adjacent rotors is checked. Finally, it is confirmed that the dynamic performance of the rotors slightly changes, but the difference due to the spacing is not noticeable. In addition, the CFD analysis shows a lateral flow phenomenon that cannot be confirmed by linear potential theory, and it is confirmed that the CFD analysis is necessary for the motion analysis of the rotor.

• 한국의류산업학회지
• /
• 제8권2호
• /
• pp.233-238
• /
• 2006

This research confirmed the chemical structure of Curcumine and Carthamin pigments whose pigments were separated and refined from the Curcuma longa and Carthamus Tinctorious which were natural dye using FT-IR, HPLC and so on. The cotton and the silk fabrics were dyed using a main pigment and then this research obtained the conclusion as it follows. The curcumine, the main pigment of Curcuma longa extracted from the mixed solvent of acetic anhydride and methanol ($CH_3OH$), had the maximum absorption wavelength at 504.0 nm and was confirmed as yellow natural pigment. The Carthamin, the main pigment of Carthamus Tinctorious extracted from the mixed solvent of dichloromethane and methanol, had the maximum absorption wavelength at 420.0nm. This pigment was confirmed as yellow natural pigment. The dyeing property of the main pigment about the silk fabrics was superior to that about the cotton in both the Curcuma longa and Carthamus Tinctorious, and the dyeing property of Carthamus Tinctorious was superior to that of Curcuma longa.

• 아태비즈니스연구
• /
• 제11권3호
• /
• pp.291-306
• /
• 2020

Purpose - This study attempts to expand the realm of country-of-origin theory to incorporate the relevant cultural-psychological variables (i.e., ethnocentricism and psychological distance). Design/methodology/approach - This sttudy verified the effects of the two antecedent variables on the consumers' purchase intention of Korean prducts. For this purpose, the study implemented survey questionnaire mathod on respondents living in Liaoning Province of China. Findings - The study result confirmed the relationship betweencountry image, product attitude, and purchase intention of Korean products. Also, the study found that ethnocentrism adversely affects Chinese consumers' purchase decision on Korean products. Finally, the study confirmed the that psychological distance moderates the relationship between country image (ad product image) on purchase intention. Research implications or Originality - The study provides useful implications on the studies focusing on the country-of-origin effect in that it confirmed the effets of cultural-pychological variables such as ethnocentrism and psychological distance. The result also offers useful corporate strategies for the companies entering Chinese market particularly in segmenting the market based on such cultural-psychological variables.

• 융합경영연구
• /
• 제10권5호
• /
• pp.25-34
• /
• 2022

Purpose: The purpose of this study is to find a way to improve the quality of life of the blind by confirming the effect of the motivation of the blind to participate in golf activities and the effect of income and self-efficacy in these relationships. Research design, data, and methodology: This study conducted a survey of 30 visually impaired people, and simple regression analysis, additive multiple moderating effect analysis were conducted using SPSS and PROCESS macro. Results: First, it was confirmed that the motivation to participate in golf activities is an important factor in improving the quality of life. Second, it was confirmed that income has a positive effect on the quality of life rather than the motivation to participate in golf activities, but self-efficacy negatively affects the quality of life. Third, it was confirmed that the interaction between participation motivation and income level negatively affects the quality of life, but the interaction between participation motivation and self-efficacy improves the quality of life. Conclusions: It suggests that organizations, golf courses, local governments, and volunteers who support the blind's outdoor activities, especially golf activities, need to establish a support system and take a careful approach to overcome these factors.

• 한국입자에어로졸학회지
• /
• 제18권3호
• /
• pp.61-68
• /
• 2022

In this study, a fluidized bed particle generator was developed to generate an aerosol without supply of compressed air and to increase portability. It was assumed that the mixing ratio of the test particles and beads, the input amount, and the air flow rate supplied to the generator would have effect on the aerosol generation characteristics. The product of these three parameters was set as a characteristic parameter and particle generation characteristics according to the change of the characteristic parameter were observed. As a result, it was confirmed that the input amount of test particles and beads was not suitable as a characteristic parameter and a characteristic parameter expressed as a product of the mass mixing ratio and the air flowrate was newly defined. When the new characteristic parameter is applied, it can be confirmed that the total amount of particles generated from the particle generator is a function of the characteristic parameter. As a result of measuring the amount of particle generation by adjusting the characteristic parameter, it was confirmed that the performance required for the test particle generator for the field inspection equipment of PM-2.5 sensors could be satisfied.