• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1211-1224
• /
• 2023

Clouds cause many difficult problems in observing land surface phenomena using optical satellites, such as national land observation, disaster response, and change detection. In addition, the presence of clouds affects not only the image processing stage but also the final data quality, so it is necessary to identify and remove them. Therefore, in this study, we developed a new cloud detection technique that automatically performs a series of processes to search and extract the pixels closest to the spectral pattern of clouds in satellite images, select the optimal threshold, and produce a cloud mask based on the threshold. The cloud detection technique largely consists of three steps. In the first step, the process of converting the Digital Number (DN) unit image into top-of-atmosphere reflectance units was performed. In the second step, preprocessing such as Hue-Value-Saturation (HSV) transformation, triangle thresholding, and maximum likelihood classification was applied using the top of the atmosphere reflectance image, and the threshold for generating the initial cloud mask was determined for each image. In the third post-processing step, the noise included in the initial cloud mask created was removed and the cloud boundaries and interior were improved. As experimental data for cloud detection, CAS500-1 L2G images acquired in the Korean Peninsula from April to November, which show the diversity of spatial and seasonal distribution of clouds, were used. To verify the performance of the proposed method, the results generated by a simple thresholding method were compared. As a result of the experiment, compared to the existing method, the proposed method was able to detect clouds more accurately by considering the radiometric characteristics of each image through the preprocessing process. In addition, the results showed that the influence of bright objects (panel roofs, concrete roads, sand, etc.) other than cloud objects was minimized. The proposed method showed more than 30% improved results(F1-score) compared to the existing method but showed limitations in certain images containing snow.

• Korean Journal of Social Welfare
• /
• v.68 no.2
• /
• pp.107-130
• /
• 2016

This study is aimed at the exploratory research on the influence of the obligation of extension of the retirement age on the baby boom generation. The basic question of this study is about which of the baby boom generation can get how much benefit according as the extension of the retirement age becomes compulsory. The extension of the retirement age is the system that can be applied to regular full-time workers. Accordingly, this study is intending to analyze the characteristics of the workers having a high likelihood for benefits from extension of the retirement age by tracing the economic activity state and labor history of the baby boomers. For this purpose, this study looked into the change of the economic activity state by age cohort of the male baby boomers based on the data for the Korea Labor Panel's 4th(2001) & 17th(2014)year. Using Survival analysis, this study also analyzed who will continue to remain as a regular full-time wage earner. As the result of the analysis, it was found that the more the cohort ages of baby boomers increased, the smaller the probability of remaining as a regular full-time wage earner, and the group who can get benefits from extension of the retirement age was predicted to account for only 11.4% level among the baby boomers. In addition, the result showed that there was a high likelihood of getting more benefits from extension of the retirement age when the baby boomers worked for the government-invested institution, corporate bodies, and government organizations rather than working for private enterprises. Thus, it can be safely said that there might appear a generational conflict due to extension of the retirement age in that such jobs coincide with the ones favored by the rising generation.

• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.65-78
• /
• 2006

This paper investigates the cost structure ot the Korea and Japan railroad industry with respect to density, scale and scope economies as well as productivity growth rate using a generalized trans)og multiproduct cost function model. The paper then assumes that the Korea and Japan railway companies pi·educe three outputs (incumbent railway passenger-kilometers. Shinkansen passenger-kilometers, ton-kilometers of freight) using four input factors (labor, fuel, maintenance, rolling stock and capital). The specified cost function includes foul other independent variables: track lengths to reflect network effects, two dummies to reflect nation and ownership effects, and time trend as a proxy for technical change. The simultaneous equation system consisting of a cost function and three input share equations is estimated with the Zellner's iterative seemingly unrelated regression. The unbalanced panel data used in the paper, a total of 154 observations. are collected from the annual records of the Korea National Railroad (KNR) for the yews $1977{\sim}2003$, Japan National Railways (JNR) for the years $1977{\sim}1984$. seven Japan Railways (JR's) for the years $1987{\sim}2003$. The findings show that the Korean and Japanese railways exhibit product-specific and overall economies of density but product-specific diseconomies of scale with respect to incumbent railway passenger-kilometers, Shinkansen-kilometers and ton-kilometers. However, the railways experience mild overall economies of scale which result from economies of scope associated with the joint production of incumbent railway/Shinkansen and feight, freight/incumbent railway and Shinkansen except Shinkansen/incumbent railway and freight. In addition, the economies of density and scale in the KNR, JR east, JR central, and JR west companies at the point of the years $1990{\sim}2003$ average is generally analogous to the above results at the point of sample average. There also appear to be economies of ssope associated with the joint Production of the incumbent railway and Shinkansen in JR central but diseconomies of scope in JR East and JR West. The findings also indicate that the productivity growth rate of the privately-owned JR's is larger than that of the government-owned KNR.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2713-2723
• /
• 2014

This study adopts an ecological perspective to empirically navigate the issues surrounding the impact of parental abuse on the emotional development of adolescents. The data is used from the Korean Children and Youth Panel Survey 2011 (KCYPS 2011), which was conducted by the National Youth Policy Institute (n=2,270). Path models were constructed in which adolescents' environmental mediators (i.e., the relationship with parents, friends, and teachers; and school life) control their negative emotions (i.e., aggressiveness, negative physical symptoms, social weakness and depression); in turn to compare the difference between two groups based on parental abuse by using Structural Equation Modeling (SEM). As with the non-abused group (n=1,644), all the environmental mediators remained significant to control their negative emotion; whereas, the abused group (n=626) showed no significant pathway from their relationship with teachers and school life to negative emotion. This indicates that the abused group have limited number of the mediators to control their negative emotion than those of the non-abused group. For the non-abused group, the mediator with the highest total effect to control their negative emotion was the relationship with their friends; on the other hand, the abused group's mediator that showed the highest total effect to control their negative emotion was the relationship with their parents. Although the relationship with teachers remained significant as a mediator to affect school life for the both groups, teachers were not significant to control the negative emotion of the abused group. These findings suggest that the negative relationship with teachers in the abused group is a factor to threat the school adaptation of adolescents, which also leads to problems that are related to the emotional development of adolescents.

• Journal of Mushroom
• /
• v.17 no.4
• /
• pp.197-204
• /
• 2019

In this study, smart farm technology was used by farmers cultivating 'CHIKUMASSHU T-011' in order to develop an optimal growth model for the precision cultivation of bottle-grown winter mushroom and the results of the same are mentioned herein. Farmers participating in the experiment used 60 ㎡ of bed area with 4 rows and 13 columns of shelf shape, 20 horsepower refrigerator, 100T of sandwich panel for insulation, 6 ultrasonic humidifiers, 12 kW of heating, and 20,000 bottles of Flammulina velutipes mushroom spores. The temperature, humidity, and carbon dioxide concentrations, which directly affect the growth of the mushroom, were collected and analyzed from the environmental sensors installed at the winter mushroom cultivation area. The initial temperature was found to be 14.5℃, which was maintained at 14℃ to 15℃ until the 10th day. In the restriction phase, the initial temperature was 4℃ and was maintained between 2℃ and 3℃ until the 15th day, while during the growth phase, it was maintained between 7.5℃ to 9.5℃. Analysis of the humidity data revealed initial humidity to be 100%, which varied between 88% to 98% during primordia formation period. The humidity remained between 77% to 96% until the 15th day, in the restriction phase and between 75% to 83% during the growth phase. The initial carbon dioxide concentration was 3,500 ppm and varied between 3,500 ppm to 6,000 ppm during primordia formation period and was maintained at 6,000 ppm until the 15th day. During the growth phase, the carbon dioxide concentration was found to be over 6,000 ppm. Fruiting body characteristics of 'CHIKUMASSHU T-011' cultivated in the farmhouse were as follows: Pileus diameter of 7.5 mm and thickness of 4.1 mm, stipe thickness of 3.3 mm, and length of 154.2 mm. The number of valid fruiting bodies was 1,048 unit per 1,400 mL bottle, and the individual weight was 0.71 g per unit. The yield of fruiting bodies was 402.8 g per 1,400 mL bottle.

• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.155-161
• /
• 2018

In this study, we analyze the growth environment using smart farm technology in order to develop the optimal growth model for the precision cultivation of the bottle-grown oyster mushroom 'Suhan'. Experimental farmers used $88m^2$ of bed area, 2 rows and 5 columns of shelf shape, 5 hp refrigerator, 100T of sandwich panel for insulation, 2 ultrasonic humidifiers, 12 kW of heating, and 5,000 bottles for cultivation. Data on parameters such as temperature, humidity, carbon dioxide concentration, and illumination, which directly affect mushroom growth, were collected from the environmental sensor part installed at the oyster mushroom cultivator and analyzed. It was found that the initial temperature at the time of granulation was $22^{\circ}C$ after the scraping, and the mushroom was produced and maintained at about $25^{\circ}C$ until the bottle was flipped. On fruiting body formation, mushrooms were harvested while maintaining the temperature between $13^{\circ}C$ and $15^{\circ}C$. Humidity was approximately 100% throughout the growth stage. Carbon dioxide concentration gradually increased until 3 days after the beginning of cultivation, and then increased rapidly to approximately 2,600 ppm. From the 6th day, $CO_2$ concentration was gradually decreased through ventilation and maintained at 1,000 ppm during the harvest. Light was not provided at the initial stage of oyster mushroom cultivation. On the $3^{rd}$ and $4^{th}$ day, mushrooms were irradiated by 17 lux light. Subsequently, the light intensity was increased to 115-120 lux as the growth progressed. Fruiting body characteristics of 'Suhan' cultivated in a farmhouse were as follows: Pileus diameter was 30.9 mm and thickness was 4.5 mm; stipe thickness was 11.0 mm and length was 76.0 mm; stipe and pileus hardness was 0.8 g/mm and 2.8 g/mm, respectively; L values of the stipe and pileus were 79.9 and 52.3, respectively. The fruiting body yield was 160.2 g/850 ml, and the individual weight was 12.8 g/10 unit.

• Journal of Animal Science and Technology
• /
• v.55 no.1
• /
• pp.67-74
• /
• 2013

To know the emission amount of greenhouse gases from bedding materials of cowshed floor, the emission rates of methane ($CH_4$) and nitrous oxide ($N_2O$) gases from a simulated cowshed floor (SCF) with sawdust that manure loading rate into the bedding material could be accurately controlled were assessed in this study. The manure loading rates of Korean beef and Holstein dairy cattle into the SCF of $0.258m^2$ surface area with 10 to 15 cm height sawdust were $1.586kg/m^2/d$ and $3.588kg/m^2/d$, respectively, and those were calculated on the basis of "Standard model for sustainable livestock" and "Data for excretion amount of manure from livestock". All experiments were done in triplicates in three different seasons (May to July, Sep. to Nov., and Feb. to Apr.) using 12 SCFs. The effects of bedding material thickness on $CH_4$ and $N_2O$ emission from SCFs for both Korean beef cattle and Holstein dairy cattle were not statistically significant (p<0.05). Emission amount of $CH_4$ and $N_2O$ per square meter of SCF for Holstein dairy cattle was 7.5 and 1.2 times higher than that of Korean beef cattle, respectively. The yearly $CH_4$ amount per head was 17.7 times higher in Holstein dairy cattle, obtaining 130.4 g/head/year from SCF for Holstein dairy cattle and 7.4 g/head/year from SCF for Korean beef cattle, and $N_2O$ was also 3.8 times higher in Holstein dairy cattle (3,267 g/head/year in Korean beef cattle and 14,719 g/head/year in Holstein dairy cattle). However, the $N_2O$-N per loaded nitrogen into SCF was higher in Korean beef cattle, having 0.2148 and 0.1632 kg $N_2O$-N/kg N in Korean beef cattle and Holstein dairy cattle, respectively, and those values were 3.07 and 2.33 times higher than that of Intergovernmental Panel on Climate Change (IPCC) 2006 guideline (GL) (0.07 kg $N_2O$-N/kg N).

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.2
• /
• pp.135-148
• /
• 2010

Arab boycotts of Danish products, Australian boycotts of French products and Chinese consumer aversion toward Japanese products are all examples of how adverse actions at the country level might impact consumers' behavior. The animosity literature has examined how consumers react to the adverse actions of other countries, and how such animosity impacts consumers' attitudes and preferences for products from the transgressing country. For example, Chinese consumers are less likely to buy Japanese products because of Japanese atrocities during World War II and the unjust economic dealings of the Japanese (Klein, Ettenson and Morris 1998). The marketing literature, however, has not examined how consumers react to adverse actions committed by their own country against other countries, and whether such actions affect their attitudes towards purchasing products that originated from the adversely affected country. The social psychology literature argues that consumers will experience a feeling called collective guilt, in response to such adverse actions. Collective guilt stems from the distress experienced by group members when they accept that their group is responsible for actions that have harmed another group (Branscombe, Slugoski, and Kappenn 2004). Examples include Americans feeling guilty about the atrocities committed by the U.S. military at Abu Ghraib prison (Iyer, Schamder and Lickel 2007), and the Dutch about their occupation of Indonesia in the past (Doosje et al. 1998). The primary aim of this study is to examine consumers' perceptions of adverse actions by members of one's own country against another country and whether such perceptions affected their attitudes towards products originating from the country transgressed against. More specifically, one objective of this study is to examine the perceptual antecedents of collective guilt, an emotional reaction to adverse actions performed by members of one's country against another country. Another objective is to examine the impact of collective guilt on consumers' perceptions of, and preference for, products originating from the country transgressed against by the consumers' own country. If collective guilt emerges as a significant predictor, companies originating from countries that have been transgressed against might be able to capitalize on such unfortunate events. This research utilizes the animosity model introduced by Klein, Ettenson and Morris (1998) and later expanded on by Klein (2002). Klein finds that U.S. consumers harbor animosity toward the Japanese. This animosity is experienced in response to events that occurred during World War II (i.e., the bombing of Pearl Harbor) and more recently the perceived economic threat from Japan. Thus this study argues that the events of Word War II (i.e., bombing of Hiroshima and Nagasaki) might lead U.S. consumers to experience collective guilt. A series of three hypotheses were introduced. The first hypothesis deals with the antecedents of collective guilt. Previous research argues that collective guilt is experienced when consumers perceive that the harm following a transgression is illegitimate and that the country from which the transgressors originate should be responsible for the adverse actions. (Wohl, Branscombe, and Klar 2006). Therefore the following hypothesis was offered: H1a. Higher levels of perceived illegitimacy for the harm committed will result in higher levels of collective guilt. H1b. Higher levels of responsibility will be positively associated with higher levels of collective guilt. The second and third hypotheses deal with the impact of collective guilt on the preferences for Japanese products. Klein (2002) found that higher levels of animosity toward Japan resulted in a lower preference for a Japanese product relative to a South Korean product but not a lower preference for a Japanese product relative to a U.S. product. These results therefore indicate that the experience of collective guilt will lead to a higher preference for a Japanese product if consumers are contemplating a choice that inv olves a decision to buy Japanese versus South Korean product but not if the choice involves a decision to buy a Japanese versus a U.S. product. H2. Collective guilt will be positively related to the preference for a Japanese product over a South Korean product, but will not be related to the preference for a Japanese product over a U.S. product. H3. Collective guilt will be positively related to the preference for a Japanese product over a South Korean product, holding constant product judgments and animosity. An experiment was conducted to test the hypotheses. The illegitimacy of the harm and responsibility were manipulated by exposing respondents to a description of adverse events occurring during World War II. Data were collected using an online consumer panel in the United States. Subjects were randomly assigned to either the low levels of responsibility and illegitimacy condition (n=259) or the high levels of responsibility and illigitemacy (n=268) condition. Latent Variable Structural Equation Modeling (LVSEM) was used to test the hypothesized relationships. The first hypothesis is supported as both the illegitimacy of the harm and responsibility assigned to the Americans for the harm committed against the Japanese during WWII have a positive impact on collective guilt. The second hypothesis is also supported as collective guilt is positively related to preference for a Japanese product over a South Korean product but is not related to preference for a Japanese product over a U.S. product. Finally there is support for the third hypothesis, since collective guilt is positively related to the preference for a Japanese product over a South Korean product while controlling for the effect of product judgments about Japanese products and animosity. The results of these studies lead to several conclusions. First, the illegitimacy of harm and responsibility can be manipulated and that they are antecedents of collective guilt. Second, collective guilt has an impact on a consumers' decision when they face a choice set that includes a product from the country that was the target of the adverse action and a product from another foreign country. This impact however disappears from a consumers' decision when they face a choice set that includes a product from the country that was the target of the adverse action and a domestic product. This result suggests that collective guilt might be a viable factor for company originating from the country transgressed against if its competitors are foreign but not if they are local.