• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.205-210
• /
• 2014

This is concerned with the technology to display the design on Porcelain and adjust malfunction for moving effect and light intensity by curator. More precisely, the technology makes it possible that the porcelain is connected to Light module which is the device for controlling light emission and rotating rolling plate, etc that are connected to LED light module, optical fiber and controller that is for scenario from the given storytelling. In addition, with a WiFi portable device (Smart-phone, other mobile device). equipped with a scenario programs, information for operation, failure and malfunction can be obtained and analyzed in real-time, and menu color and alarm is alerted when the displaying design is in abnormal status, which makes the early reactions to the status. Furthermore, the collected data can be sent through WiFi network to the device and PC managed by the curator specialized in managing the design on the Porcelain, thus the technology could help the curator who have less knowledge about moving pattern on the Porcelain. There is always a possibility of malfunction due to various condition that are caused by wring-harness when modules are wired-connected. In this research, in order to overcome this problem, we propose a system configuration that can do monitoring and diagnosis with a device for collecting data from LED control module, Light emission sensor and a personal WiFi device. Also, we performed connection between optical Fiber and LED and interlock for the system defined by the definition for information and storytelling scenario.

• Industry Promotion Research
• /
• v.5 no.3
• /
• pp.73-79
• /
• 2020

This study aims to study the problems and solutions of institutional support for the elderly living alone, focusing on the General Support for Living Alone Elderly announced by the Ministry of Health and Welfare in 2018. Results, First, a customized support system for the elderly living alone should be introduced. In order to improve the life satisfaction of the elderly living alone, it is necessary to develop a program that meets the most basic daily life needs, and a specific plan and a support system to link services should be prepared. Second, it is necessary to increase social interest in the elderly living alone. Solving problems for the elderly living alone should be preceded by social interest in the elderly living alone. For this, it is necessary to strengthen the social network. Third, it proposes legislation and amendment for the elderly living alone. Some revisions of existing laws have limitations, and are resolved through individual laws, such as standards and definitions for various types of elderly jobs, reorganization of the delivery system including agencies dedicated to elderly jobs, workers-related regulations, and preferential purchase systems for senior products. It is desirable to do. In conclusion, welfare support for the elderly living alone should be comprehensive and comprehensive. For the welfare of the elderly living alone, personalized care services should be provided first, and social support for the elderly living alone should be promoted on the basis of increasing social interest, and laws and revisions must be actively and proactively made for the elderly living alone.

• Journal of Digital Convergence
• /
• v.16 no.2
• /
• pp.361-366
• /
• 2018

The purpose of this study is to examine the four aspects of design terminology : dictionary, legal, academic, and popular according to the changes of various media and the stream of times and to establish a basic framework for design terms that can be refined in time. Based on an understanding of the essential meaning of design terms, it provides the basis for establishing the basic direction of the use of design terms that can be used between the design industry and other industries. The research methods are as follows: First, the preliminary meaning of design terms was examined through previous studies. Second, the present state of use of design terms was analyzed using the Internet and various network media. Third, through interviews with experts in each design field, the criteria of contemporary design terms was explored. Ultimately, the direction to establish design terms was derived through these research processes. The result of this study is meaningful to provide the new index of the time and conceptual change of design terms. In the future, it will be necessary to expand the research on design common terms continuously in design-related academia and related industries, and try to establish professional and popular design terms through diverse opinions.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.291-299
• /
• 2020

The purpose of this study was to be used as basic data for the development of future-type curriculum in health. The awareness and preparation of the forth industrial revolution were surveyed on 280 college students in health departments preparing medical technicians. A self-written structured questionnaire was used for data collection, and the recognition of the forth industry revolution was 2.74, 3D printing (3.59) was high, and neural network machine learning(2.33) was the lowest. Students majoring in Physiotherapy (3.00) had the highest perception, and those majored in Dental engineering(2.37) had the lowest perception, and there was a difference in the degree of perception of IoT by major (p=0.024). For the forth industrial revolution, 54.5% of students are preparing, and lack of interest (42.9%) is the most difficult reason to prepare, and 50.6% of educational experience and 60.9% of VR&AR game experience have experience. In the era of the forth industrial revolution, job loss (38.7%) was high, and the required competency was creative capacity (50.6%). Therefore, it is necessary to develop a curriculum related to the fourth industrial revolution and apply teaching methods that can increase the awareness and preparation of health college students in the era of the fourth industrial revolution.

• Korean Business Review
• /
• v.12
• /
• pp.209-237
• /
• 1999

With the increasing speed of internationalization of corporations under WTO system foreign direct investment is considered as the important means of international cooperation as well as avoiding trade barrier. From this point of view the study on foreign direct investment of Korean corporations is of great importance. Many studies till now, however, are concerned with the macroscopic analysis of foreign direct investment of Korean corporations, not with the establishment of strategy appropriate to the environment of host country and the investment performance. In order to meet the problems mentioned above this thesis aims at accomplishing the following three tasks. (1) synthetic assessment of existing theories of foreign direct investment. (2) systematic adjustment of factors of environment in the foreign direct investment activities. (3) analysis of above factors in the foreign direct investment of Korean textile industry and proper proposal of strategic model for the individual corporation. The results of analysis according to the aim of the study are as follows: (1) To lead foreign direct investment successfully, variable and effective information-presentation should be offered with priority. (2) The investment strategy through regional diversification is required. (3) The localization of decision making has to be attempted assertively. (4) The global network system is needed for more recommendable foreign direct investment. (5) More aggressive and outgoing attitude like developing into the local market and obtaining the high-technology is desperately needed.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.3
• /
• pp.141-147
• /
• 2019

Recently, the biggest issue in the electricity industry is the increase in renewable energy, and various technologies are being developed to ensure the capacity of the power system. In addition, super-grids linking power systems are being pushed to utilize eco-friendly energy between countries and regions worldwide. The HVDC transmission technology is required to link the power network between regions with different characteristics of the power system such as frequency and voltage. Until now, Korea has applied HVDC transmission technology that connects mainland and Jeju Island with submarine cables. But, the HVDC transmission technology is still developing for long-distance high-capacity power transmission from power parks on the east coast to load-tight areas near the metropolitan area. Considering the high population density and mountainous domestic environment, it is pushing for commercialization of the design technology of the ${\pm}500kV$ Double Bipole with metallic return wire transmission line to transmit large-scale power of 8 GW using minimal right of ways. In this paper, the insulation characteristics were studied for the design of double-bipole transmission tower with metallic return wire, which is the first time in the world. And the air insulation characteristics resistant to the various overvoltage phenomena occurring on transmission lines were verified through a full-scale impulse voltage test.

• Korean Journal of Labor Studies
• /
• v.23 no.2
• /
• pp.109-139
• /
• 2017

In light that solidarity movements become significant under the situation of 'labor and labor movement' crisis, our study pays attention to the fact that the Hope Bus campaigns made remarkable achievements, and aims to figure out how those campaigns were successful, by focusing on their solidarity networking. The successful operating conditions of solidarity networking in the Hope Bus campaigns are examined in three aspects - the conditions of triggering, forming, and activating. The solidarity networking of Hope Bus campaigns were mainly triggered by the injustice of layoffs by Hanjin Heavy Industry, aerial protest by Jin-sook Kim, and the tragic symbol of the protest site (Crane no. 85). The solidarity movement of Hope Bus could be formed by the mutual trust and cohesive team-building of key network brokers, their utilization and expansion of social movement networks, and massive ripple effect of SNS-mediated communication. The solidarity networking of Hope Bus was effectively activated by open and de-hierarchical operations of the central planning group, active solidarity activities of participant groups, and the provision of 'heuristic experience' for developing the sensibility to labor solidarity. The virtuous combination of those three operating conditions leads to the building of unified forces among social movements, massive civil participation, and meaningful movement outcomes, through the solidarity networking of Hope Bus campaigns.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.1307-1307
• /
• 2024

Recent research on heavy equipment has been conducted for the purposes of enhanced safety, productivity improvement, and carbon neutrality at construction sites. A sensor-based approach is being explored to monitor the location and movements of heavy equipment in real time. However, it poses significant challenges in terms of time and cost as multiple sensors should be installed on numerous heavy equipment at construction sites. In addition, there is a limitation in identifying the collaboration or interference between two or more heavy equipment. In light of this, a vision-based deep learning approach is being actively conducted to effectively respond to various working conditions and dynamic environments. To enhance the performance of a vision-based activity recognition model, it is essential to secure a sufficient amount of training datasets (i.e., video datasets collected from actual construction sites). However, due to safety and security issues at construction sites, there are limitations in adequately collecting training dataset under various situations and environmental conditions. In addition, the videos feature a sequence of multiple activities of heavy equipment, making it challenging to clearly distinguish the boundaries between preceding and subsequent activities. To address these challenges, this study proposed a domain adaptation in vision-based transfer learning for automated excavator activity recognition utilizing 3D ResNet (residual deep neural network). Particularly, this study aimed to identify the optimal depth of 3D ResNet (i.e., the number of layers of the feature extractor) suitable for domain adaptation via fine-tuning process. To achieve this, this study sought to evaluate the activity recognition performance of five 3D ResNet models with 18, 34, 50, 101, and 152 layers, which used two consecutive videos with multiple activities (5 mins, 33 secs and 10 mins, 6 secs) collected from actual construction sites. First, pretrained weights from large-scale datasets (i.e., Kinetic-700 and Moment in Time (MiT)) in other domains (e.g., humans, animals, natural phenomena) were utilized. Second, five 3D ResNet models were fine-tuned using a customized dataset (14,185 clips, 60,606 secs). As an evaluation index for activity recognition model, the F1 score showed 0.881, 0.689, 0.74, 0.684, and 0.569 for the five 3D ResNet models, with the 18-layer model performing the best. This result indicated that the activity recognition models with fewer layers could be advantageous in deriving the optimal weights for the target domain (i.e., excavator activities) when fine-tuning with a limited dataset. Consequently, this study identified the optimal depth of 3D ResNet that can maintain a reliable performance in dynamic and complex construction sites, even with a limited dataset. The proposed approach is expected to contribute to the development of decision-support systems capable of systematically managing enhanced safety, productivity improvement, and carbon neutrality in the construction industry.

• Journal of Korea Technology Innovation Society
• /
• v.22 no.3
• /
• pp.362-381
• /
• 2019

The purpose of this study is to examine how two factors among various affecting factors of technological innovation, i.e. sectoral system of innovation and R&D support service, were actually applied in the case of NUC Electronics. This company has achieved high level of innovation performance through change of injection port and improvement of extracting rate. This was possible because each component of sectoral system of innovation system was matched with the innovation activity. The improvement of the performance in NUC Electronics was attributable to its own innovation efforts and R&D support service of government research institute. In the process of technological innovation, the company could receive high-level services in areas such as product design and virtual experiments that companies can not solve themselves. It can be said that the role of government and public institutions to support the shortage of SMEs was important. In terms of each component of sectoral system of innovation, we found that there were many opportunities of new technology; sustainability was low; imitation was easy; appropriability was low but it has dualily; accumulation of technology was relatively high, availability of external knowledge was high. At the same time, both of the company and the network played an important role, and market conditions were very favorable. In terms of R&D support services, it is a direct effect that a great deal of time and cost savings have been achieved through virtual experiments on the material and shape of the screw. As an indirect effect, the core competence of the company has been greatly strengthened by utilizing the momentum of technology development through external support, hence the company could establish the structure of virtuous circle of innovation.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.5
• /
• pp.3-11
• /
• 2023

Building information modeling (BIM) can help to visualize and manage the building-related information at the object-based level, and it is possible to help link the tasks in the network of Hanok construction. While many studies have significant interest in using BIM for modern construction, there is only few studies to observe the use of BIM for traditional construction, commonly called Hanok construction in South Korea. Hence, the main goal of this study is to develop a system dynamic model for investigating how the BIM can be widely used for Hanok construction. To this end, this study identified the factors influencing the BIM uses for the Hanok construction, developed a causal loop diagram (CLD) to investigate the interrelationships among the factors, and provided a final model based on the mathematical definitions. Based on the scenario analysis, it is demonstrated that the support to building Hanok and education cost for BIM positively influence activating and using the BIM for the Hanok construction. Based on the dynamics of the factors identified in this study, it is important to consider expanding support for Hanok construction and education cost for BIM to successfully integrate and utilize BIM in the construction industry.