• 대한전자공학회논문지
• /
• 제11권6호
• /
• pp.1-15
• /
• 1974

본 연구는 탄성파 지연선에 이용되는 탄성표면파중에서 SH표면파 모우드에 대하여 이론적 해석을 하였으며 그 결과 전기-기계적 결합계수가 크며 또한 여전 매질내 깊이 방향으로 아주 작은 감쇠률을 갖고 표면을 따라 전파됨을 알았단. 예로서 PZT-4인 경우 에너지의 80%가 감쇠되는 깊이는 190파장이 된다. 또한 탄성표면파 지연선을 하나의 계단자강으로서 취급하여 삽입손실를 구하였으며 특히 SH표면파 모우드와 같이 전기-기계론 결합계수가 큰 경우는 인터디지탈 트랜스듀셔의 전극폭과 윤극간 간격 사이의 비에 따라 중심 주파수가 현저히 달라진다. 그리고 탄성파 지연선의 온도계수를 벌크파인 종파, 횡파에 대하여 구하였으며 LiTaO2 Z축방향 전파의 횡파는 지연시간의 온도계수가 5.4X10-6/℃로 아주 작아짐을 알았다. 또한 LiNbO3의 130°, 64° 로테이트 Y캇트, X전파의 탄성표면파의 온도계수가 이론치와 잘 일치함을 실험적으로 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제24권6호
• /
• pp.739-743
• /
• 2003

New quaternary compounds $ANb_2PS_{10}$ (A = Na, Ag) and $AuNb_4P_2S_{20}$ were synthesized and characterized. The structures of three compounds consist of one-dimensional infinite chains built by [$Nb_2S_{12}$] and [$PS_4$] units. Cation atoms are occupied within the van der Waals gap of sulfur atoms between infinite chains to make -S…$M^+$…S- contacts. There is only one Au atom site and so crystallographically a unit cell contains four equivalent Au atoms in $AuNb_4P_2S_{20}$. This is only the half of the numbers of Na or Ag atoms in $NaNb_2PS_{10}$ or $AgNb_2PS_{10}$. The ratio between $Nb_2PS_{10}$ matrix vs the cation is, therefore, 1 : 1 for Ag and Na, but it is 2 : 1 for Au. Mixed valency in Au or Nb was expected to balance the charge in the latter compound. The electronic structures calculated based on the extended Huckel tight-binding method show that $ANb_2PS_{10}$ (A = Ag, Na) are semiconducting, while $AuNb_4P_2S_{20}$ is metallic, which is not consistent with the experimental results of these three compounds that all exhibit semiconducting property. The result of calculation suggests that $AuNb_4P_2S_{20}$ might be a magnetic insulator. Magnetic measurement experiment exactly proved that the compound is a Slater antiferromagnetic material with the Neels' temperature of 45 K. It is recognized, therefore, that electronic structure analysis is very useful to understand the properties of compounds.

• 한국분말재료학회지
• /
• 제20권6호
• /
• pp.474-478
• /
• 2013

The most general photocatalyst, $TiO_2$ and $WO_3$, are acknowledged to be ineffective in range of visible light. Therefore, many efforts have been directed at improving their activity such as: band-gap narrowing with non-metal element doping and making composites with high specific surface area to effectively separate electrons and holes. In this paper, the method was introduced to prepare a photo-active catalyst to visible irradiation by making a mixture with $TiO_2$ and $WO_3$. In the $TiO_2-WO_3$ composite, $WO_3$ absorbs visible light creating excited electrons and holes while some of the excited electrons move to $TiO_2$ and the holes remain in $WO_3$. This charge separation reduces electron-hole recombination resulting in an enhancement of photocatalytic activity. Added Ag plays the role of electron acceptor, retarding the recombination rate of excited electrons and holes. In making a mixture of $TiO_2-WO_3$ composite, the mixing route affects the photocatalytic activity. The planetary ball-mill method is more effective than magnetic stirring route, owing to a more effective dispersion of aggregated powders. The volume ratio of $TiO_2(4)$ and $WO_3(6)$ shows the most effective photocatalytic activity in the range of visible light in the view point of effective separation of electrons and holes.

• 전기학회논문지P
• /
• 제63권4호
• /
• pp.301-306
• /
• 2014

Recently in accordance with the rapid development of the industrial society, the accidents caused by dielectric breakdown have been increasing in power grid. It is important to prevent the dielectric breakdown of a high voltage apparatus to reduce the damage from electrical hazards. To establish an electrically reliable database of insulation design criteria for high voltage apparatus, a study on dielectric characteristics test is indispensable. In this study, dielectric characteristics according to field utilization factors (${\xi}$) which are represented as the ratio of mean electric field to maximum electric field are investigated. the dielectric breakdown experiments by using several kinds of electrode systems made with stainless steel are performed by AC breakdown voltage under air-insulation. Also, the experimental results are analyzed by the Weibull distribution. As a result, it is found that the dielectric characteristics of air-insulation are determined by ${\xi}$ as well as arrangement of electrode systems. It is considered that the results of this study would be applicable to designing the air-insulated high voltage apparatuses.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권2호
• /
• pp.227-243
• /
• 2015

In this paper, the effects of nonlinear soft clay on dynamic embedment of offshore pipeline were investigated. Seabed embedment by pipe-soil interactions has impacts on the structural boundary conditions for various subsea structures such as pipeline, riser, pile, and many other systems. A number of studies have been performed to estimate real soil behavior, but their estimation of seabed embedment has not been fully identified and there are still many uncertainties. In this regards, comparison of embedment between field survey and existing empirical models has been performed to identify uncertainties and investigate the effect of nonlinear soil parameter on dynamic embedment. From the comparison, it is found that the dynamic embedment with installation effects based on nonlinear soil model have an influence on seabed embedment. Therefore, the pipe embedment under dynamic condition by nonlinear parameters of soil models was investigated by Dynamic Embedment Factor (DEF) concept, which is defined as the ratio of the dynamic and static embedment of pipeline, in order to overcome the gap between field embedment and currently used empirical and numerical formula. Although DEF through various researches is suggested, its range is too wide and it does not consider dynamic laying effect. It is difficult to find critical parameters that are affecting to the embedment result. Therefore, the study on dynamic embedment factor by soft clay parameters of nonlinear soil model was conducted and the sensitivity analyses about parameters of nonlinear soil model were performed as well. The tendency on dynamic embedment factor was found by conducting numerical analyses using OrcaFlex software. It is found that DEF was influenced by shear strength gradient than other factors. The obtained results will be useful to understand the pipe embedment on soft clay seabed for applying offshore pipeline designs such as on-bottom stability and free span analyses.

• STI Policy Review
• /
• 제3권1호
• /
• pp.46-62
• /
• 2012

This study investigates the effects of the two most important indicators of a nation's state of scientific infrastructure: R&D investment and the number of R&D researchers engaged in high-tech product export competitiveness for a panel of 11 countries/economies from East Asia from 1994 to 2010. A GMM panel estimation method was employed to account for the dynamic effect of trade and to control for un-observed country specific effects that may arise due to an inter-country differences and intra-country dynamics. Accordingly, the empirical results reveal that (once controlled for the influence of per capita income) physical capital and infrastructure, a 1% increase in a country's expenditure on the ratio of R&D to GDP may increase high-tech product export performance by approximately $397 million per year. Other factors constant, a 1% increase in the number of R&D researchers is expected to increase the ability to export high-tech products by approximately $67 million. The East Asian development experience demonstrates how latecomers can follow systematic industrialization and join the handful of economies that have come a long way toward closing the knowledge gap with the global technological leaders. However, this does not mean that the policy approaches and overall commitments pursued by each East Asian economy in relation to R&D investment and acquisition of an adequate pool of researchers, and their ultimate achievements in high-tech product export competitiveness were uniform. As a result, there is still a significant variation among countries/economies in terms of performance. This study recommended a number of potential tools and policy instruments that may assist policy makers to foster R&D as an engine to enhance the high-tech product export competitiveness.

• 한국진공학회지
• /
• 제10권1호
• /
• pp.104-111
• /
• 2001

$SiH_4$, $CH_4$, $B_2H_6$ 혼합기체를 이용하여 플라즈마 화학증착법으로 비정질 탄화실리콘(a-SiC:H) 박막을 증착하였다. 기상 doping 농도를 0에서 $2.5\times10^{-2}$ 범위에서 변화시켜 얻은 박막의 물성을 SEM, XRD, Raman 분광법, FTIR, SIMS, 광흡수도와 전기전도도 분석을 통하여 살펴보았다. $B_2H_6$/($CH_4+SiH_4$) 기체유량비가 증가할수록 붕소의 도핑효율와 미세결정성은 감소하였다. 증착 중 $B_2H_6$ 기체가 첨가됨에 따라 비정질 탄화실리콘 박막의 Si-C-H 결합기의 강도는 감소하였으며, 이의 영향으로 박막내의 수소함량은 $B_2H_6/(SiH_4+CH_4$) 기체 유량비가 증가함에 따라 16.5%에서 7.5%로 단조감소하였다. $B_2H_6(CH_4+SiH_4$) 기체유량비가 증가할수록 a-SiC:H 박막의 광학적 밴드갭과 전기활성화 에너지는 감소하였고, 전기전도도는 증가하였다.

• 대한소아치과학회지
• /
• 제31권1호
• /
• pp.26-33
• /
• 2004

Bonding Agent는 1세대에서 5세대에 거치기까지 많은 발전을 하였고, 최근에는 임상술식과정의 단축에 있어 비약적인 발전을 보였다. 최근에 개발되어 소개된 self-etching priming/bonding agent는 6세대 bonding agent로 분류되며, 이를 이용하여 법랑질 및 상아질에 대한복합 레진의 충전시 발생하는 미세누출을 methylene blue를 이용하여 관찰한 결과, 상아질에서는 기존의 4세대 5세대 접착제와 유의 한 차이가 없었으나, 법랑질에서는 6세대 bonding agent가 통계학적으로 높은 미세누출 양상을 보였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권6호
• /
• pp.2398-2421
• /
• 2020

In third world countries like Pakistan, the production of electricity has been quickly reduced in past years due to rely on the fossil fuel. According to a survey conducted in 2017, the overall electrical energy capacity was 22,797MW, since the electrical grids have gone too old, therefore the efficiency of grids, goes down to nearly 17000MW. Significant addition of fossil fuel, hydro and nuclear is 64.2%, 29% and 5.8% respectively in the total electricity production in Pakistan. In 2018, the demand crossed 20,223MW, compared to peak generation of 15,400 to 15,700MW as by the Ministry of Water and Power. Country faces a deficit of almost 4000MW to 5000MW for the duration of 2019 hot summer term. Focus on one aspect considering Demand Side Management (DSM) cannot oversea the reduction of gap between power demand and customer supply, which eventually leads to the issue of load shedding. Hence, a scheduling scheme is proposed in this paper called RPSMDSM that is based on selection of those appliances that need to be only Turned-On, on priority during peak hours consuming minimum energy. The Home Energy Management (HEM) system is integrated between consumer and utility and bidirectional flow is presented in the scheme. During peak hours of electricity, the RPSMDSM is capable to persuade less power consumption and accomplish productivity in load management. Simulations show that RPSMDSM scheme helps in scheduling the electricity loads from peak price to off-peak price hours. As a result, minimization in electricity cost as well as (Peak-to-Average Ratio) PAR are accomplished with sensible waiting time.

• 한국전자파학회논문지
• /
• 제11권4호
• /
• pp.657-665
• /
• 2000

본 논문에서는 음성 및 데이터 트래픽에 대한 비트오율 성능이 CDMA 방식의 IMT-2000 시스댐에서 역방향 링크의 시뮬레이션 결과에 의해서 평가되었다. 역방향링크에서 시률래이션은 ITU-R에서 제시한 욕내, 도보, 그리고 차량 환경에 대하여 수행되었다. 또한 시뮬레이션에서 BER 성능을 향상시키기 위한 기술로 1.6념-Iz 전력 제어, 5-tap FIR 필터를 이용한 페이딩신호의 진폭과 위상 추정, 그리고 연판정 Viterbi 및 Reed-Solomon 복호 등이 적용되었다. 시뮬레이션 결과로는 최적의 파일롯전력 대비 트래픽전력의 비, 핑거수에 따른 BER 성능, 그리고 $10^{-6}$ BER에서 길쌍부호와 Concatenated 부호와의 성능비교를 제시하고 있다.