• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.334-339
• /
• 2003

The welding residual stress has on important effect on welding deformation, fatigue fracture, buckling strength, brittle fracture, etc. For the purpose of relaxation of welding residual stress, post welding heat treatment is widely used. In this paper, residual stresses were calculated by two dimensional thermal elasto-plastic analysis using finite element method. Heat transfer analysis are performed by transient analysis. Also structure analysis are carried out by of thermal-mechanical coupled analysis. Numerical analysis are used by ANSYS 5.7.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.4
• /
• pp.69-77
• /
• 2009

Structural analysis of a brake shoe for commercial vehicle was performed using finite element method. Since the strength of a brake shoe is affected by the magnitude and distribution shape of the contact pressure with the drum, the contact pressure between the shoe friction material and drum was calculated using a 2-Dimensional non-linear contact analysis in a state. And the brake was actuated by input air pressure and the drum of it was calculated both stationary and dynamic based on forced torque applied to the drum during the static state analysis. The results of the above analysis were then used as the load boundary conditions for a 3-Dimensional shoe model analysis to determine the maximum strain on the shoes. In the analysis model, the values of tensile test were used for the material properties of the brake shoes and drum, while the values of compression test were used for the friction material. We assumed it as linear variation, even though the properties of friction material were actually non-linear. The experiments were carried out under the same analysis conditions used for fatigue test and under the same brake system which equipped with a brake drum based on the actual axle state in a vehicle. The strains were measured at the same locations where the analysis was performed on the shoes. The obtained results of the experiment matched well with those from the analysis. Consequently, the model used in this study was able to determine the stress at the maximum air pressure at the braking system, thereby a modified shoe model in facilitating was satisfied with the required endurance strength in the vehicle.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.114-122
• /
• 1999

By using the FEM, a method for the stress analysis of the presented dies has been proposed. In this method, FEM and Lame equation are used for the analysis of the die insert and the stress ring, respectively. The proposed method includes the calculation of the contact pressure between the die insert and the stress ring. To show the validity, the proposed method has been applied to the simple test problem. The results of the stress analysis have been compared with the results of ANSYS, a commercial FE-code. Cold extrusion has been simulated by using the rigid-plastic FEM and the results of the deformation analysis have been used as the input of the die structure analysis. The stress states of the prestressed extrusion die have been obtained. The stress analysis of the die insert with stress rings has also been performed during extrusion.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.616-619
• /
• 2007

Nowadays, urbanized area expands its boundary, and distribution of urbanized area is gradually transformed into more complicated pattern. In Korea, SMA(Seoul Metropolitan Area) has outstanding urbanized area since 1950s. But it is ambiguous whether urban distribution is clustered or dispersed. This study aims to show the way in which expansion of urbanized area impacts on spatial distribution pattern of urbanized area. We use quadrat analysis, nearest-neighbor analysis and fractal analysis to know distribution pattern of urbanized area in time-series urban growth. The quadrat analysis indicates that distribution pattern of urbanized area is clustered but the cohesion is gradually weakened. And the nearest-neighbor analysis shows that point patterns are changed that urbanized area distribution pattern is progressively changed from clustered pattern into dispersed pattern. The fractal dimension analysis shows that 1972's distribution dimension is 1.428 and 2000's dimension is 1.777. Therefore, as time goes by, the complexity of urbanized area is more increased through the years. As a result, we can show that the cohesion of the urbanized area is weakened and complicated.

• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.465-471
• /
• 2009

In this paper, a relationship between the noise and vibration of a high-speed train's wheelset is examined by using time-varying frequency analysis with random data analysis which together contributes to a reduction in the number of experimental running. The noise and vibration of the wheelset is mainly caused by an interaction between the wheel and railway which shows in non-stationary characteristics. For the analysis, they are measured by some microphones and accelerometers, and those signals are post-processed by time-varying frequency analysis with random data analysis. From the analysis, their methods are useful for analyzing the noise and vibration of high-speed train's wheelset.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.3
• /
• pp.46-53
• /
• 1998

The aim of the present study is to develop a direct structural analysis system for more reliable and effective structural safety estimation of floating tripe ocean structures. In this system, the following three modules are included; i.e., a rigid body motion analysis module based on the three dimensional panel method, a structural analysis module, and a stochastic analysis module based on short and long term spectral analysis techniques. The structural analysis module consists of the general purpose finite element analysis program NASTRAN and the automatic load data generation program LOADGEN. As an illustrative example, the developed system is applied to structural design of a PILOT Barge Mounted Plant(BMP). Results of the structural analysis are compared with those obtained using a two dimensional strip method.

• The Research Journal of the Costume Culture
• /
• v.22 no.6
• /
• pp.899-910
• /
• 2014

The purpose of this study was to analyze high school students' school uniform wearing attitude by group according to clothing attitude targeting Gyeongnam area. This study aims to provide preliminary data in the field of school uniform and marketing that clothing propensity by groups is considered. This study conducted a survey targeting 762 high school students in Gyeongnam. For statistical analysis, SPSS for Window 14.0 was used for frequency analysis, factor analysis, reliability analysis, multiple sponse analysis, cluster analysis, ANOVA analysis and Duncan's ex-post analysis method. As a result of cluster analysis on the clothing attitude, students were divided into 4 segmentation of fashion seeking group, fashion indifference group, conformity group and modesty group. As a result of verification on the difference in perception toward wearing school uniform by groups which were classified according to the propensity of clothing attitude, activity, stability, and practicality were all varied according to the propensity of clothing attitude. 4 groups were significant differences in the degree of consent to wearing school uniform, price of school uniforms, tendency to prefer famous brand when purchasing school uniform, experience of transforming school uniform, opinion about school uniform modification and reason for school uniform modification. While low graders were many in 'modesty group', upper graders were many in 'fashion seeking group', which means that more segmentalized satisfaction of clothing by group may be raised if such a fact is considered when planning clothing for high school students segmentalized by age.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.2
• /
• pp.130-137
• /
• 2012

In this paper, a post-analysis of cooling system for infrared(IR) window was performed based on heating experiment of IR window system. We applied the same experimental conditions to analysis, and then validated the analysis technique by comparing numerical and experimental results. For an analysis software, we used a professional heat/fluid analysis program and the numerical and experimental results were in fairly good agreement. We investigated the effect of thermal transfer between the frame and IR window and also a cooling efficiency between fluid and structure in order to determine the proper parameters for the analysis. In this study, 100 % thermal transfer between the frame and IR window and 30 % cooling efficiency between fluid and structure have been proposed, which can be used in the future conceptual design and analysis of similar IR windows.

• Journal of Information Technology Services
• /
• v.16 no.1
• /
• pp.119-138
• /
• 2017

Mobile easy payment is a term for using mobile devices to facilitate financial transactions. Mobile easy payment is a quickly emerging practice, supported by the dramatic increase of mobile phone or device users around the world. The purpose of this study is to classify user's group of the mobile easy payment service by their lifestyle based on I-VALS type and to investigate differences in usage behavior among the user groups. For empirical study, a questionnaire survey was carried out with users of mobile easy payment services using the Internet from June 7 to 10 in 2016. We conducted factor analysis for I-VALS, usage factors, satisfaction factors. We also performed cluster analysis for group classification, and analysis of variance, cross analysis to compare the different usage behavior among the user groups. In analysis results, first three cluster appeared including "ICT task-oriented group", ICT positive and socialities oriented group", "ICT leader-oriented group". Second, it was found significant differences among the clusters about factor of "easy of use", "securities", "universality", "satisfaction". Third, we showed that there were significant differences in time first used the service. Based on these findings, we provide practical implications. Results of our study can be expected to provide the basis of differentiated marketing strategy of mobile easy payment services.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.252-259
• /
• 1997

A method to automate hazard analysis of chemical plants is proposed in this paper. The proposed system is composed of three knowledge bases - unit knowledge base, organizational knowledge base and material knowledge base, and three hazard analysis algorithms - deviation, malfunction and accident analysis algorithm. Hazard analysis inference procedure is developed based on the actual hazard analysis procedures and accident development sequence. The proposed algorithm can perform hazard analysis in two methods and represent all conceivable types of accidents using accident analysis algorithm. In addition, it provides intermediate steps in the accident propagation, and enables the analysis result to give a useful information to hazard assessment. The proposed method is successfully demonstrated by being applied to diammonium phosphate manufacturing process. A system to automate hazard analysis is developed by using the suggested method. The developed system is expected to be useful in finding the propagation path of a fault or the cause of a malfunction as it is capable to approach causes of faults and malfunctions simultaneously.