• Textile Coloration and Finishing
• /
• v.31 no.1
• /
• pp.25-32
• /
• 2019

The influence of the contact amount of carbon dioxide per unit mass of dyestuff(${\alpha}$) on dyeing uniformity in supercritical fluid dyeing is analyzed in this study. The experiments using a 5L class Pilot Scale dyeing machine is carried out for this study purpose. For a fixed temperature and pressure, the amount of sample and the dyeing leveling time were considered as process variables. The results show that the increase in the amount of the sample causes a higher color difference than the reference sample, and it also increases the amount of residual dye. On the other hand, the color difference tended to decrease with the increase in dyeing time. Based on these results, the correlation between ${\alpha}$ value and dyeing uniformity in supercritical fluid dyeing is obtained.

• Journal of Power System Engineering
• /
• v.6 no.2
• /
• pp.54-59
• /
• 2002

The principle of the FDM(fused deposition modeling) process is based on the layer by layer manufacturing technology, like other RP(rapid prototyping) process. In the FDM process, each layer may have different shape. Therefore, the built model may have stairs shape on its surface. This stairs shape is one of the serious problems in the FDM process. Thus in this study, cube models and spherical models were fabricated by FDM process to investigate the influence of injection amount on surface roughness. Models with various road width were also built to investigate the influence of road width on surface roughness. Surface roughness of the models was measured and analyzed. The result obtained in this study are expected to help selecting the part build orientation for optimum surface roughness.

• International Commerce and Information Review
• /
• v.16 no.3
• /
• pp.121-138
• /
• 2014

China and Korea have interacted with each other for 20 years since 1992 when China and Korea established diplomatic relations. During this period, the trade and investment between two countries have increased rapidly. In addition to the enhancement of economic cooperation and the expansion of personal exchange, the relationship between two countries was upgraded to mutual strategic cooperative relationship in 2008 from the 1 friendly and cooperative relations and the economic exchange and cooperation were largely expanded. In this paper, the current situation and characteristics of the trade between China and Korea were figured out. In order to find out the development direction of China and Korea trade, through empirical analysis, the correlation of decisive factors that influence the trade amount of these two countries were analyzed. In terms of dependent variables for the empirical analysis, the trade amount between China and Korea was considered. While the GDP of these countries, the direct investment amount of two countries and the openness of external trade of these countries were considered as independent variables. The degree of economic freedom of these countries was set as policy variable. According to the analysis results, when the GDP of China and Korea is getting higher, there is positive influence on the trade amount of China and Korea. It is showed that the direct investment of Korea has positive influence on the trade amount of China and Korea. Meanwhile, there is negative influence of China's direct investment on the trade amount. When the degree of freedom of these countries is getting higher, the influence of trade amount was showed significantly. Furthermore, when the economic freedom of these countries is getting higher, the insignificant things about trade amount of China and Korea were extracted as insignificant.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.5
• /
• pp.135-145
• /
• 2007

In this study, as the result of analyzing the relationship and influence between economic outcome and R&D supporting investment, the number of supporting subjects among the technological innovational areas of SMEs, it is as below. First, as the economic result of analyzing companies from the investment in R&D of technological innovational areas of minor companies, the number of supporting subjects and amount of R&D have relationship with increase of sales and export amount, employee reduction & the effect of new job creation shows positive correlation with the effect of import replacement. Second, as analyzing the influence of the investment in R&D has economic effect from of technological innovational minor companies. This is thought that the financial and R&D support increase a significant effect on economical, technical against SMEs.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.265-268
• /
• 2002

This study is focused on the influence of mixture and construction factor on bleeding amount of concrete According to the results, Amount of bleeding with mixture factor increases with increase of water contents and W/C. Amount of bleeding with construction factors is larger in the case of placing height of 1m than in the case of placing height of 0 and 0.5m. Amount of bleeding is larger at the temperature of 20℃ than at the temperature of 35℃ and 5℃, and increases in order of vibration compacting, standard lamping and non tamping. Therefore, to reduce bleeding, it is thought that it is profitable to reduce water content within the range that fluidity and workability don't go bad, to lower the placing height and not to do compacting too much.

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.4
• /
• pp.178-187
• /
• 2002

Austempered Ductile Iron (ADI) castings having various chemical composition and heat treatment conditions were investigated. Especially, this study was investigated the influence of various parameters on austempering temperature and alloying elements. The addition of Mo, Cu, and Ni individually or combined in these alloys also investigated. The alloying elements influence the austempering reaction, the microstructures, mechanical properties and amount of retained austenite. In this study, the mechanical properties (ultimate tensile strength(UTS), hardness, elongation) are analysed to show the relationship between alloying elements, austempering temperatures and amount of retained austenite. The amount of retained austenite was the range of 15 - 40%. In case of the alloy to witch Mo, Cu, and Ni was added, the amount of retained austenite was the largest at a constant austempering temperature.

• Journal of Korean Academy of Nursing Administration
• /
• v.4 no.1
• /
• pp.73-88
• /
• 1998

The management of nursing resource is very important. that is because nursing staff accounts for 30-40% of total staff in a hospital and nurses provide patoents with attentive service for hours daily. The continuous turnover of nursing staff. however, impedes the quality-oriented nursing care, which will consequently leads to the loss of human and material resource in competitive society. This study aimed to calculate nurse's activity and compare the activity amount based on career experience. Futhermore it aimed to find factors which would influence 'quality weighed direct nursing activity amount'. Questionnaires and check lists for this study were distributed to nurses in a suburban hospital outside of Seoul from October 20 to November 14. 1997. The nursing activities were calculated according to professionality. independency and working hour. And then it were accumulated by quality score. The collected data was analyzed by statistical methods as t-test, ANOVA, correlation, multiple regression. The results of this study were as follows ; Firstly, carrel' experience had no influence on the quality weighed nursing activity amount. But the quality level of service of skilled nurses was higher than that of new nurses. Secondly, career was a variable affecting the quality in nursing service. So career was positively related to the quality of nursing care. Patient's disease severity and number of patient were positively correlated with weighed nursing activity amount. But job satisfaction was negatively correlated v:ith the amount. Thirdly, the independent variables which had significant influence on the weighed nursing activity amount were disease severity and the number of patients, The severity score and number of patient were directly proportional to the weighed nursing activity amount. This results indicated· that weighed nursing activity amount was influenced by the number of patient and patient's disease severity. The quality score of nursing services for experienced members is higher than that of new staff. But both new and skilled staff showed no difference in the quality weighed nursing activity amount. Internal and. external environment influences nursing activities. The quality of nursing services is very important factor in nursing activity. Therefore nursing managers should make an effort to improve nursing care quality through continuous research. Also they should try to maintain experience nurses and assign nursing staff appropriately with patient's severity and other relevant factors being considered. The quality-improved nursing care in the hospital will strengthen hospital's competitiveness.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.6
• /
• pp.875-880
• /
• 2011

This study introduces the addition of wheat fiber, oat fiber, and inulin to Chinese-style sausages, in amounts of 3.5% and 7%, respectively. Researchers used analysis of general composition and texture properties, and sensory evaluation to assess the influence of these three types of dietary fiber on the quality and palatability of Chinese-style sausages. Results showed that the type and amount of dietary fiber introduced did not significantly influence the general composition, color, and total plate count of sausages. However, the addition of wheat fiber and oat fiber significantly hardened the texture of Chinese-style sausages (p<0.05). A greater amount of dietary fiber added implied a harder texture. Added inulin did not influence the texture of Chinese-style sausages (p>0.05). Results of product assessment showed that, aside from sausages with 7% wheat fiber scoring less than 6 points (on a 9-point scale) in terms of overall acceptability, the other groups of Chinese-style sausages scored over 6 points. Judges preferred the sausage groups with 3.5% added oat and wheat fiber. This study demonstrates that adding fiber to Chinese-style sausages to increase the amount of dietary fiber is feasible.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.6
• /
• pp.701-708
• /
• 2011

Although Titanium material has superior properties, it belongs to difficult-to-machine materials. The present research applies magnetic abrasive finishing to precision machining of internal-face of titanium pipes, and analyzed & assessed the influence of grinding conditions on magnetic abrasive effects through the removed amount and surface roughness of materials. There was the influence on grinding properties according to change of rotational speed, a total input of mixed powder and an input of grinding liquid, and when the total input, rotational speed and ratio of electrolytic iron versus magnetic abrasives are 8g and 1000rpm, it was most advantageous in aspects of surface roughness and material removal amount, and the grinding liquid remarkably improved the surface roughness and material removal amount only with addition of trace amounts of light oil rather than dry machining conditions. And a result of considering the influence on grinding properties by using an inert gas (Argon gas) for improving grinding properties of the internal-face of titanium pipe, the present research has obtained improvement effects in the removal amount and surface roughness through utilization of an inert gas.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.339-342
• /
• 2003

This study is intended to investigate the influence of chemical admixture on bleeding of concrete. According to the results, the amount of bleeding with elapse of time does not make much difference in the case of naphthalene type water reducing agent(RN), Naphthalene type high performance water reducing agent(HN) and Melamine type high performance water reducing agent(HM), but it is largest in the case of Polycarbonic acid type high performance water reducing agent(HP). Bleeding speed also is highest in the case of HP in comparison with other chemical admixture. This prove that high performance water reducing agent like HP has little effect on fluidity of concrete, but influences the amount of bleeding more greatly, instead. As properties of hardened concrete, compressive strength makes no difference in the case of RN, HN and HM, but on the other hand, it increases in the case of HP due to a decrease of air content and the large amount of bleeding.