• 제목/요약/키워드: Texture properties

검색결과 2,137건 처리시간 0.024초

메밀을 첨가한 절편의 조직감 및 관능 분석 (Textural and Sensory Properties of Jeolpyon added with Buckwheat)

  • 백진경;김정미;김종군
    • 한국식생활문화학회지
    • /
    • 제20권6호
    • /
    • pp.715-720
    • /
    • 2005
  • Jeolpyon rice cake was made using buckwheat flour and measured its texture, color and sensory properties as follows. According to the amylograph guage test, rice flour was the highest in its initial pasting temperature $82.5^{\circ}C$. With 5% addition of buckwheat flour, it came to be $81.0^{\circ}C$ and became $79.5^{\circ}C$ at 10%, and $78.0^{\circ}C$ at 15%, which was lower than the control. And its maximum temperature at peak viscosity showed at $87^{\circ}C$ and it showed no difference in temperature according to the amount of buckwheat flour. The maximum value (peak point) was 690 BU in control and it increased following to the added amount of buckwheat flour, 710 BU in adding buckwheat flour 10% and 740 BU in 15% of buckwheat flour. In relating to the changes of texture, it became hard by the added amount of buckwheat flour because of decreasing cohesiveness and springiness, but increasing gumminess and brittleness. The hardness increased by adding with buckwheat flour through the freeze preserving period. But adding buckwheat flour of 10% decreased the hardness. Regarding the color value, lightness decreased by the adding buckwheat flour, but a and b value increased. As a result of the sensory analysis about Jeolpyon prepared with buckwheat flour, the most favoured ratio of buckwheat flour for color and preference was at 10%. In case of 15%, it was a little dark so it was not desirable. Based on the above test, the best combination ratio of buckwheat for Jeolpyon was 10%. And Jeolpyon can be easily made at home as well as mass production due to relatively simple making procedure.

향신료를 첨가한 식빵의 품질특성 (Effect of Spice Powder on the Characteristics of Quality of Bread)

  • 김미림;박금순;박찬성;안상희
    • 한국식품조리과학회지
    • /
    • 제16권3호
    • /
    • pp.245-254
    • /
    • 2000
  • 마늘분, 생강분, 계피분의 첨가량을 달리하여 제조한 식빵의 품질특성 비교 결과는 다음과 같다. 관능검사에서 마늘분, 생강분, 계피분의 첨가량이 증가할수록 외관의 부드러운 정도(softness)와 색상(color)이 강하다고 평가되었으며, 질감특성의 바삭바삭한 정도(brittle), 경도(hardness), 씹힘성(chewiness)도 첨가량이 증가할수록 높게 나타났다. 기호도면에서는 향신료의 첨가량이 증가할수록 낮게 평가되었으며, 대조군과 마늘분, 생강분, 계피분을 각각 1% 첨가한 식빵을 가장 선호하였다. 색도 측정 결과 향신료의 첨가량이 증가할수록 명도 L값은 감소하였으며, 반면에 적색도 a값과 황색도 b값은 증가하는 경향을 보였다. Texture측정에서 전반적으로 경도(hardness), 응집성(cohesiveness), 탄력성(springiness), 껌성(gumminess), 파쇄성(brittleness) 모두 마늘분, 생강분, 계피분을 각각 1%첨가한 식빵이 가장 낮게 나타났으며, 항신료의 첨가량이 증가할수록 대조군보다 특성이 강하게 나타났다. 관능검사와 기계적검사의 상관관계 결과 명도가 높을수록 선호하였으며, 경도(hardness), 파쇄성(brittleness)이 클수록 기호도가 낮아 입안의 촉감이 부드럽고 부서지는 정도가 적으며 색상이 밝을수록 좋게 평가되었다. 관능검사와 기호도간의 상관관계에서 밀가루의 독특한 냄새, 구수한 맛, 탄력성, 부푼 정도가 높을수록 선호하는 경향을 보여 향신료 특유의 냄새가 강하지 않고 구수하며 탄력성이 좋고 부푼정도가 좋을수록 선호하였다. 이상의 결과 마늘분, 생강분, 계피분을 각각 1% 첨가한 향신료 식빵의 품질이 높게 평가되어 식빵 제조시 향신료의 첨가량은 1%정도가 적당하다고 사료된다.

  • PDF

한국인의 조직감 표현용어에 관한 연구 (Studies on the Texture Describing Terms of Korean)

  • 이철호;박상희
    • 한국식품과학회지
    • /
    • 제14권1호
    • /
    • pp.21-29
    • /
    • 1982
  • 우리나라 주요식품에 대한 조직감 표현은 다양하며 이들을 정리, 분류함으로써 각 식품에 대한 우리나라 사람들의 조직감 기호를 조사할 수 있었다. 밥류에서는 견고성, 응집성, 탄력성, 부착성이 특히 중요하였으며 입자의 형태, 크기, 배열과 수분 및 지방함량들도 중요하게 나타났다. 이중에서 탄력성이 높고 씹힘성이 큰 쫄깃쫄깃한 성질에 대한 기호도가 높으며 응집성과 견고성이 낮은 푸석푸석한 성질에 대하여 싫어하는 경향이 뚜렷이 나타났다. 국수류에서도 견고성, 응집성, 탄력성이 중요한 성질로 나타났으며 특히 견고성, 응집성, 탄력성이 큰 쫄깃쫄깃한 성질과 탄력성이 큰 말랑말랑한 성질에 대한 선호도가 컸으며 견고성이 너무 강하거나 약한 것에 대하여 싫어하는 경향이 나타났다. 김치류에서도 견고성, 응집성, 탄력성이 중요한 조직감 요소임을 알 수 있었으며 특히 견고성이 크나 응집성이 약한 성질 즉 아삭아삭, 사각사각 등으로 표현되는 깨어지는 성질에 대한 선호도가 크게 나타났으며 견고성이 너무 약화되는 것에 대하여 싫어하는 경향이 뚜렷이 나타났다.

  • PDF

Quality Properties of Sausages Made with Replacement of Pork with Corn Starch, Chicken Breast and Surimi during Refrigerated Storage

  • Seo, Hyun-Woo;Kang, Geun-Ho;Cho, Soo-Hyun;Ba, Hoa Van;Seong, Pil-Nam
    • 한국축산식품학회지
    • /
    • 제35권5호
    • /
    • pp.638-645
    • /
    • 2015
  • This effect of replacing pork with corn starch, chicken breast and surimi on the chemical composition, physical, texture and sensory properties of sausage were investigated during storage. Five treatments of sausage such as; T1 (10:0:0, %), T2 (10:5:0, %), T3 (10:10:5, %), T4 (10:15:10, %) and T5 (10:20:15, %) were prepared with replacement of pork with corn starch, chicken breast and surimi. The sausage made with pork meat served as control (C). The sausage in the control had higher moisture and fat contents, but lower protein content than the treatments (p<0.05). The sausages in the T2 and T5 had decreased pH values after 3 wk storage (p<0.05). The lightness value was lowest in the T3, while the yellowness values were lowest in the T5 during the storage. The TBARS (2-thiobarbituric acid reactive substance) values were lowest in the control in all storage times (p<0.05). However, the sausage in the control had higher VBN (volatile basic nitrogen) value than the treatments during the 1 wk storage (p<0.05). All treatments had significantly higher hardness, cohesiveness, springiness, gumminess and chewiness values (p<0.05) than the control. The results indicated that corn starch, chicken breast and surimi can used as a pork replacer, that it also improves the physicochemical and texture properties of pork sausages.

쌀의 원료상태 및 Extrusion Cooking 조건이 Puffed Extrudate의 특성에 미치는 영향 (Effects of Raw Material and Extrusion Cooking Conditions on Physical and Chemical Properties of the Puffed Rice Extrudate)

  • 이영춘;하연철;복진영;신동빈;이경혜
    • 한국식품과학회지
    • /
    • 제22권1호
    • /
    • pp.105-109
    • /
    • 1990
  • Laboratary scale co-rotating twin-screw extruder(D=4mm, L/P=14)를 이용하여 쌀을 압출성형시켜 팽화 쌀 스넥으로 사용할 수 있는 extrudate를 제조하려고 시도하였다. 찹쌀가루를 원료로 하여 extrusion cooker의 screw speed를 200-360rpm으로 증가시키면, extrudate의 air cells 조직이 균일하게 개선되었으며, 원료의 수분함량은 적어도 17.5% 이하로 유지하는 것이 조직에 좋은 영향을 주었다. 찹쌀과 멥쌀의 powder와 grits를 원료로 사용했을 경우, extrudate의 객관적 및 관능적 텍스쳐는 powder가 grits보다 우수하였으며, 찹쌀과 멥쌀간의 차이는 현저하지 않았다. 그리고 extrudate를 기름에 튀기면 텍스쳐가 향상됨을 볼 수 있었다.

  • PDF

성분배합에 따른 만두피의 물성 변화 (Changes of Rheology on the Dumpling Shell by added Materials)

  • 강갑석;김봉섭
    • 한국식품저장유통학회지
    • /
    • 제10권4호
    • /
    • pp.498-505
    • /
    • 2003
  • 만두피의 반죽제조에 키토산(시판 키토산 및 제조 키토산) 및 폴리인산, 구아껌, 타피오카 등의 성분 배합비율에 따른 반죽의 물성변화를 알아보고자 하였다. 그 결과는 다음과 같다. 제조된 균류키토산의 수분함량은 6.57∼6.58%, 질소함량은 6.71∼6.91%, 용해도는 99.05∼99.13%, 점도는 2.21∼2.23cps, 아세틸화도는 12.0∼l2.7% 그리고 분자량은 3.01${\times}$$10^{5}$∼3.12${\times}$$10^{5}$Dalton으로써 산처리 온도에 따른 FCs40과 FCs95의 성분 및 물리화학적 특성의 차이는 거의 없는 것으로 나타났다. 만두피 반죽에 첨가하는 폴리인산의 적절한 농도는 만두피 전체 성분 첨가량의 0.074%인 것으로 나타났으며, 폴리인산의 첨가량이 적거나 많이 함유하였을 때는 만두피 반죽의 견고성, 응집성, 탄력성 및 점착성 등이 오히려 감소하는 경향이었다. 타피오카의 첨가량에 따른 반죽의 물성에는 큰 영향을 주지는 않았으나, 첨가량은 전체성분 중량의 6.59%정도, 또한 구아껌의 경우는 0.062%정도가 만두피 반죽의 물성에 적절하였다. 만두피의 물성에 효과적인 키토산은 고분자량의 SCs, FCs40 및 FCs95 등으로 나타났다.타났다.

압연조건에 따른 AZ31 연주판재의 미세조직 및 기계적 특성 변화 (Effect of Rolling Conditions on Microstructure and Mechanical Properties of HCC AZ31 Alloy Plate)

  • 김영민;천은영;임창동;유봉선;이재현
    • 대한금속재료학회지
    • /
    • 제46권4호
    • /
    • pp.189-198
    • /
    • 2008
  • The changes in microstructure and mechanical properties of AZ31 alloy subjected hot-rolling process were investigated. The AZ31 plates fabricated by horizontal continuous casting process were prepared and have hot-rolled from 30 mm to 1 mm in thickness under different processing conditions. At the rolling temperature of $400^{\circ}C$, little surface and side crack was observed up to 20% reduction rate. As total reduction and reduction rate increase to more than 75% and 20% pass, respectively, Grains were more uniformly refined through overall thickness, and particularly lots of shear bands were appeared to be inclined at less than $20^{\circ}C$ along the rolling direction. Average grain size of less than $5{\mu}m$ and tensile properties of YS ${\geq}$ 250 MPa, UTS ${\geq}$ 300 MPa and El. ${\geq}$ 13% were acquired for hot-rolled AZ31 sheets without post-heat treatment. Maximum intensity of (0002) pole figure was decreased with an increase in reduction rate, indicating the improvement of texture by means of high reduction rate.

Effect of sous-vide cooking conditions on the physicochemical, microbiological and microstructural properties of duck breast meat

  • Dong-Min Shin;Jong Hyeok Yune;Dong-Hyun Kim;Sung Gu Han
    • Animal Bioscience
    • /
    • 제36권10호
    • /
    • pp.1596-1603
    • /
    • 2023
  • Objective: Sous-vide cooking offers several advantages for poultry meat, including enhanced tenderness, reduced cooking loss, and improved product yield. However, in duck meat, there are challenges associated with using the sous-vide method. The prolonged cooking time at low temperatures can lead to unstable microbial and oxidative stabilities. Thus, we aimed to assess how varying sous-vide cooking temperatures and durations affect the physicochemical and microbial characteristics of duck breast meat, with the goal of identifying an optimal cooking condition. Methods: Duck breast meat (Anas platyrhynchos) aged 42 days and with an average weight of 1,400±50 g, underwent cooking under various conditions (ranging from 50℃ to 80℃) for either 60 or 180 min. Then, physicochemical, microbial, and microstructural properties of the cooked duck breast meat were assessed. Results: Different cooking conditions affected the quality attributes of the meat. The cooking loss, lightness, yellowness, Hue angle, whiteness, and thiobarbituric acid reactive substance (TBARS) values of the duck breast meat increased with the increase in cooking temperature and time. In contrast, the redness and chroma values decreased with the increase in cooking temperature and time. Cooking of samples higher than 60℃ increased the volatile basic nitrogen contents and TBARS. Microbial analysis revealed the presence of Escherichia coli and Coliform only in the samples cooked at 50℃ and raw meat. Cooking at lower temperature and shorter time increased the tenderness of the meat. Microstructure analysis showed that the contraction of myofibrils and meat density increased upon increasing the cooking temperature and time. Conclusion: Our data indicate that the optimal sous-vide method for duck breast meat was cooking at 60℃ for 60 min. This temperature and time conditions showed good texture properties and microbial stability, and low level of TBARS of the duck breast meat.

인도네시아산 미이용 수종의 목재성질(IV) - Tamiang, Bangelem 및 Kamasulan 목재의 기초성질 - (Studies on the Wood Properties of Lesser-Known Species Grown in Indonesia(IV) -The Fundamental Wood Properties of Tamiang, Bangelem and Kamasulan-)

  • 정성호;정두진;박병수;이도식;조성택;이동협;홍인표;전수경
    • 한국가구학회지
    • /
    • 제11권2호
    • /
    • pp.25-35
    • /
    • 2000
  • This study was carried out to investigate the wood properties for development the proper uses of lesser-known tree species. The tested species are Tamiang(Hydnocarpus woodii) Bangelem (Strombosia zeylanica) and Kamasulan(Anisophyllea ferruginea) grown in Indonesia. fundamental wood properties such as anatomical, physical and chemical properties and characteristics related to wood processing were examined. The results are summarized as follows : These species are diffuse porous, interlocked grained and coarse textured wood. Exceptionally, texture of Tamiang is fine. The heartwoods of these species are not distinguished clearly to the sapwoods. These species have high specific gravity, high shrinkage, and excellent strength properties. However, Tamiang has moderate specific gravity. Sawing characteristics are poor for these species except Tamiang. Sawing characteristics is moderate for Tamiang. Drying characteristics are moderate for Tamiang and Bangelem, and Poor for Kamasulan. The surfacing characteristics by planer are moderate f3r all these species. Bending property and durability are poor. Ash content is low in Bangelem.

  • PDF

집중강우시 우리나라 밭토양의 토성과 경사에 따른 물유출 양상 (Runoff Pattern in Upland Soils with Various Soil Texture and Slope at Torrential Rainfall Events)

  • 정강호;허승오;하상건;박찬원;이현행
    • 한국토양비료학회지
    • /
    • 제40권3호
    • /
    • pp.208-213
    • /
    • 2007
  • 1985년부터 1991년까지 일 강우량 80 mm 이상일 때의 유거량 자료를 이용하여 집중강우시 물유출 양상을 구명하였다. 지표유거가 발생하는 유거 발생 최소 강우량은 지표피복과 경사장에 따라 결정되는 것으로 나타났으며 토성과 경사각에 따라서는 별 차이를 나타내지 않았다. 유거 발생 최소 강우량을 기준으로 그 이후의 유거량은 강우량에 따라 직선적으로 증가하였다. 그러나 이 때의 기울기 즉, 유거율은 토성, 지표 피복형태, 경사각, 경사장에 따라 달라졌다. 유거율은 토성이 세립질로 침투속도가느릴 수록 커졌으며 콩 재배에 비해 물흐름에 대한 저항이 작은 나지에서 컸다. 또한 유거율은 경사각의 제곱근에 비례하여 증가하였으며 경사장이 길어짐에 따라 특정값에 수렴하면서 감소하였다. 이러한 결과를 바탕으로 집중강우 시 유거량을 모사할 수 있는 식을 다음과 같이 개발하였다. $$Runoff=a(s^{0.5}+l^b)(Rainfall-80(1-e^{-bl}))------(9)$$ 이 식에서 a는 토양의 침투특성과 관련된 토양계수, b는 지표 피복의 영향을 나타내는 지표피복계수, s는 경사각(radian), l은 경사장(m)이다. a는 토성에 따라 0.5~0.6으로 나타났으며 세립질일 수록 값이 컸다. b는 피복조건에 따라 나지에서 0.06, 콩 재배시 0.5 정도로 평가되었다.