• 제목/요약/키워드: Texture Mapping

검색결과 207건 처리시간 0.042초

벡터장 기반 변형기술을 이용한 이미지 와핑 방법 : 텍스쳐 매핑에의 응용을 중심으로 (Image Warping Using Vector Field Based Deformation and Its Application to Texture Mapping)

  • 서혜원;코디에 프레데릭
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제36권5호
    • /
    • pp.404-411
    • /
    • 2009
  • 본 논문은 Von Funck 외가 제안한 벡터장 기반 변형기술에 기반한 새로운 텍스쳐 이미지의 와핑 방법을 제안한다. 사용자는 텍스척 이미지와 텍스쳐매핑이 될 3차원 물체 표면에 두 가지 방법으로 제한조건을 지정할 수 있다: 위치 제한조건은 이미지 상의 특징점의 위치를 특정위치 (물체 표면의 대응하는 특징점 위치)로 제한하는 데 사용하며, 그라디언트 제한조건을 사용하려는 특징점 이미지의 일부분에 대한 방향과 스케일에 대해 제어가 가능하다. 이러한 제한조건으로부터 그에 대응하는 C1 연속인 속도벡터장을 이미지 공간 상에 구축하고, 구축된 벡터장을 따라 텍스쳐 이미지 상의 모든 픽셀들을 이동시킨 결과로써 최종 텍스쳐 이미지를 획득한다. 본 연구에서 구현한 텍스쳐 매핑 애플리케이션에서는 우선 대상 3차원 메쉬를 최소제곱 등각매핑(Least Squares Conformal Mapping) 방법을 사용하여 2차원 평면에 임베딩시킨다. 다음으로, 제안하는 이미지 와핑 방법을 적용하여 텍스쳐 이미지 상의 특징점이 임베딩된 메쉬의 대응하는 특징점과 일치되도록 하여 최종 텍스쳐맵을 획득한다. 이와 같은 벡터장기반 방법을 통해 기존의 텍스쳐매핑 방법보다 더욱 부드러운 이미지 와핑결과를 얻을 수 있었으며, 왜곡이 많이 생기는 요구조건을 만족하면서도 자기 오버랩이 생기지 않는 좋은 성질을 보임을 확인하였다.

TOF 깊이 카메라와 DSLR을 이용한 복합형 카메라 시스템 구성 방법 (Hybrid Camera System with a TOF and DSLR Cameras)

  • 김수현;김재인;김태정
    • 방송공학회논문지
    • /
    • 제19권4호
    • /
    • pp.533-546
    • /
    • 2014
  • 본 논문은 Time-of-Flight(ToF) 깊이 카메라와 DSLR을 이용한 사진측량 기반의 복합형 카메라시스템 구성방법을 제안한다. ToF 깊이 카메라는 깊이 정보를 실시간으로 출력하는 장점이 있지만 제공되는 명암 영상의 해상도가 낮고 획득한 깊이 정보가 물체의 표면상태에 민감하여 잡음이 발생하는 단점이 있다. 따라서 깊이 카메라를 이용한 입체 모델 생성을 위해선 깊이 정보의 보정과 함께 고해상도 텍스처맵을 제공하는 복합형 카메라의 구성이 필요하다. 이를 위해 본 논문은 상대표정을 수행하여 깊이 카메라와 DSLR의 상대적인 기하관계를 추정하고 공선조건식 기반의 역투영식을 이용하여 텍스처매핑을 수행한다. 성능검증을 위해 기존 기법의 모델 정확도와 텍스처매핑 정확도를 비교 분석한다. 실험결과는 제안 기법의 모델 정확도가 더 높았는데 이는 기존 기법이 깊이 카메라의 잡음이 있는 3차원 정보를 기준점으로 사용하여 절대표정을 수행한 반면에 제안 기법은 오차정보가 없는 두 영상간의 공액점을 이용했기 때문이다.

무인항공사진측량 소프트웨어를 이용한 3차원 공간정보 생성 및 비교 (Generation and Comparison of 3-Dimensional Geospatial Information using Unmanned Aerial Vehicle Photogrammetry Software)

  • 양승룡;이학술
    • 한국재난정보학회 논문집
    • /
    • 제15권3호
    • /
    • pp.427-439
    • /
    • 2019
  • 연구목적: 다양한 목적으로 생성되는 무인비행체 기반의 공간정보를 서로 다른 SW로 생성하고, 정사영상 및 DSM의 위치정확도 분석과 3D mesh의 텍스처 매핑을 비교 분석하고자 하였다. 연구방법: 서로 다른 두 개의 SW를 이용하여 동일한 무인항공영상 데이터를 처리하고, 공간정보를 생성하였다. 생성된 공간정보 중 정사영상과 DSM은 수평위치 및 수직위치 오차의 RMSE를 계산함으로써 정량적 분석을 수행하고, 정성적 분석을 수행함으로써 무인항공사진측량 SW의 공간정보 생성 결과를 비교분석하고자 하였다. 연구결과: 각각의 SW로 생성된 정사영상 및 DSM의 위치정확도에서는 큰 차이가 없었으며, 3D mesh의 텍스쳐 매핑에서 차이를 보였다. 3D mesh의 생성에는 무인항공사진측량 SW가 영향을 미치는 것을 알 수 있었다. 결론: 무인비행체 기반의 공간분석을 위한 정사영상, DSM의 생성에는 SW에 따른 영향이 없는 것으로 나타났으나 3D 가시화를 목적으로 할 경우에는 SW에 따라 텍스처 매핑 결과가 다르게 나타나는 것을 알 수 있었다.

블록단위의 프래탈 근사화를 이용한 영상코딩 (Image Coding by Block Based Fractal Approximation)

  • 정현민;김영규;윤택현;강현철;이병래;박규태
    • 전자공학회논문지B
    • /
    • 제31B권2호
    • /
    • pp.45-55
    • /
    • 1994
  • In this paper, a block based image approximation technique using the Self Affine System(SAS) from the fractal theory is suggested. Each block of an image is divided into 4 tiles and 4 affine mapping coefficients are found for each tile. To find the affine mapping cefficients that minimize the error between the affine transformed image block and the reconstructed image block, the matrix euation is solved by setting each partial differential coefficients to aero. And to ensure the convergence of coding block. 4 uniformly partitioned affine transformation is applied. Variable block size technique is employed in order to applynatural image reconstruction property of fractal image coding. Large blocks are used for encoding smooth backgrounds to yield high compression efficiency and texture and edge blocks are divided into smaller blocks to preserve the block detail. Affine mapping coefficinets are found for each block having 16$\times$16, 8$\times$8 or 4$\times$4 size. Each block is classified as shade, texture or edge. Average gray level is transmitted for shade bolcks, and coefficients are found for texture and edge blocks. Coefficients are quantized and only 16 bytes per block are transmitted. Using the proposed algorithm, the computational load increases linearly in proportion to image size. PSNR of 31.58dB is obtained as the result using 512$\times$512, 8 bits per pixel Lena image.

  • PDF

3차원 얼굴 모델링과 예측 시스템 (A Three-Dimensional Facial Modeling and Prediction System)

  • 구본관;정철희;조선영;이명원
    • 한국컴퓨터그래픽스학회논문지
    • /
    • 제17권1호
    • /
    • pp.9-16
    • /
    • 2011
  • 본논문에서는 3차원 3D 얼굴 스캔 데이터와 사진 이미지를 이용하여 3D 얼굴 모델을 생성하고 향후의 얼굴을 예측하는 시스템 개발에 대해 기술한다. 본 시스템은 3차원 텍스처매핑, 얼굴 정의 파라미터 입력 도구, 3차원 예측 알고리즘으로 구성 되어 있다. 3차원 텍스처매핑 기능에서는 3D 스캐너로 획득한 얼굴 모델과 사진 이미지를 이용하여 특정 연령에서의 새로운 얼굴모델을 생성한다. 텍스처매핑은 3D 스캐너로부터 획득한 메쉬 데이터에 정면과 좌우 측면의 세 방향의 사진 이미지를 이용하여 매핑하였다. 얼굴 정의 파라미터 입력도구는 3차원 텍스처매핑에 필요한 사용자 인터페이스 도구로서, 얼굴 모델의 정확한 재질값을 얼굴 사진으로부터 얻기 워하여 사진과 3D 얼굴 모델의 특징점을 일치시키는데 사용된다. 본 연구에서는 한 얼굴의 향후 연령대에서의 얼굴 모델을 구하기 위하여 100여개의 얼굴 스캔 데이터베이스를 이용한 통계적 분석에 의해 재질값을 예측 계산하여 해상도 높은 재질값을 가지는 모든 연령대의 3D 얼굴모델을 구성하였다.

Interior Mapping이 적용된 3D 게임의 렌더링 성능 평가 (Rendering Performance Evaluation of 3D Games with Interior Mapping)

  • 이재원;김영식
    • 한국게임학회 논문지
    • /
    • 제19권6호
    • /
    • pp.49-60
    • /
    • 2019
  • Interior Mapping은 효율적으로 그래픽 리소스를 최적화하는 방법들 중에 하나로 사용되어왔다. 본 논문에서는 보편화 된 게임엔진인 Unreal Engine 4를 활용하여 Interior Mapping을 적용했을 시 3D 게임 내의 성능 변화를 검증하기 위해 실제 모델링과 Interior Mapping의 렌더링 속도(FPS), 폴리곤 개수, 쉐이더 복잡도, 각각의 리소스 용량을 비교하였다. 또한, 효율적인 기술의 적용을 위해 큐브 맵 텍스처의 해상도와 세부 정보에 따른 성능 차이를 검증하였다.

Estimation of spatial parameters to be included in 3D mapping for long-term forest road management

  • Choi, Sung-Min;Kweon, Hyeongkeun;Lee, Joon-Woo
    • 농업과학연구
    • /
    • 제47권4호
    • /
    • pp.727-742
    • /
    • 2020
  • Point cloud-based 3D maps can obtain many kinds of information for maintenance work on forest road networks. This study was conducted to compare the importance of each factor to select the factors required for the mapping of 3D forest road maps. This can be used as basic data for attribute information required to maintain forest road networks. The results of this study found that out of a total of 30 indexes extracted for mapping 3D forest roads, a total of 21 indexes related to stakeholder groups were significantly different. The importance of the index required by the civil service group was significantly higher than that of the other groups overall. In the case of the academic group, the index importance for cut slope, fill slope, and drainage facility was significantly higher. On the other hand, the index importance for the forestry cooperative and forest professional engineer group was mostly distributed between the civil servants' group and the academic group. In particular, the type of drainage system showed the highest value among the detailed indexes. Overall, drainage related factors in this survey had high coefficient values. The impact of water on forest roads was the most important part in road maintenance. In addition, the soil texture had a high value in relation to slope stability. This is thought to be because the texture of the soil affects the stability of the slope.

텍스쳐맵 경로 재설정 툴의 개발에 관한 연구 (A Study of Reassigning Texture Map File for Correcting Directory)

  • 송밝음
    • 한국멀티미디어학회논문지
    • /
    • 제21권4호
    • /
    • pp.535-544
    • /
    • 2018
  • Developing a new texture path tool is crucial in 3D industries to automatically manage and set up texture paths for characters and environment modelings. For a better study, I compare the problems, methods and functions of the new tool(SongRepath tool) with other commonly used tools such as File Path Editor, Genie, He Texture Path. Next, I analyze the top down method system for these commonly used tools, and create a new bottom-up algorithm for a better use and efficiency. Finally, analyzing and comparing SongRepath tool with other tools in terms of operation in convenience, steps for results, checking number of Texture files, checking the numbers of new paths, checking the numbers of files not found, checking the numbers of path not changed, errors or problems, and availability of cancelation while proceeding the result. As a result, this study shows that SongRepath tool has less errors and saves more time on the processing works.

Domain Mapping using Nonlinear Finite Element Formulation

  • Patro, Tangudu Srinivas;Voruganti, Hari K.;Dasgupta, Bhaskar;Basu, Sumit
    • International Journal of CAD/CAM
    • /
    • 제8권1호
    • /
    • pp.29-36
    • /
    • 2009
  • Domain mapping is a bijective transformation of one domain to another, usually from a complicated general domain to a chosen convex domain. This is directly useful in many application problems like shape modeling, morphing, texture mapping, shape matching, remeshing, path planning etc. A new approach considering the domain as made up of structural elements, like membranes or trusses, is developed and implemented using the nonlinear finite element formulation. The mapping is performed in two stages, boundary mapping and inside mapping. The boundary of the 3-D domain is mapped to the surface of a convex domain (in this case, a sphere) in the first stage and then the displacement/distortion of this boundary is used as boundary conditions for mapping the interior of the domain in the second stage. This is a general method and it develops a bijective mapping in all cases with judicious choice of material properties and finite element analysis. The consistent global parameterization produced by this method for an arbitrary genus zero closed surface is useful in shape modeling. Results are convincing to accept this finite element structural approach for domain mapping as a good method for many purposes.

Evaluation of Volumetric Texture Features for Computerized Cell Nuclei Grading

  • Kim, Tae-Yun;Choi, Hyun-Ju;Choi, Heung-Kook
    • 한국멀티미디어학회논문지
    • /
    • 제11권12호
    • /
    • pp.1635-1648
    • /
    • 2008
  • The extraction of important features in cancer cell image analysis is a key process in grading renal cell carcinoma. In this study, we applied three-dimensional (3D) texture feature extraction methods to cell nuclei images and evaluated the validity of them for computerized cell nuclei grading. Individual images of 2,423 cell nuclei were extracted from 80 renal cell carcinomas (RCCs) using confocal laser scanning microscopy (CLSM). First, we applied the 3D texture mapping method to render the volume of entire tissue sections. Then, we determined the chromatin texture quantitatively by calculating 3D gray-level co-occurrence matrices (3D GLCM) and 3D run length matrices (3D GLRLM). Finally, to demonstrate the suitability of 3D texture features for grading, we performed a discriminant analysis. In addition, we conducted a principal component analysis to obtain optimized texture features. Automatic grading of cell nuclei using 3D texture features had an accuracy of 78.30%. Combining 3D textural and 3D morphological features improved the accuracy to 82.19%. As a comparative study, we also performed a stepwise feature selection. Using the 4 optimized features, we could obtain more improved accuracy of 84.32%. Three dimensional texture features have potential for use as fundamental elements in developing a new nuclear grading system with accurate diagnosis and predicting prognosis.

  • PDF