• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.319-334
• /
• 2006

Mechanical and chemical methods are the two ways to treat the implant surfaces. By using mechanical method, it is difficult to eliminate bacteria and by-products from the rough implant surface and it can also cause the structural change to the implant surface. Therefore, chemical method is widely used in order to preserve and detoxicate the implant surface more effectively. The purpose of this study is to evaluate the effect of tetracylcline-hydrochloride(TC-HCI) on the change of implant surface microstructure according to application time. Implants with pure titanium machined surface, SLA surface and porous surface were used in this study. Implant surface was rubbed with sponge soaked in 50mg/ml TC-HCI solution for $\frac{1}{2}$ min., 1 min., $1\frac{1}{2}$ min., 2 min., and $2\frac{1}{2}$ min. respectively in the test group and with no treatment in the control group. Then, specimens were processed for scanning electron microscopic observation. 1. Both test and control group showed a few shallow grooves and ridges in pure titanium machined surface implants. There were not significant differences between two groups. 2. In the SLA surfaces, the control specimen showed that the macro roughness was achieved by large-grit sandblasting. Subsequently, the acid-etching process created the micro roughness, which thus was superimposed on the macro roughness. Irrespective of the application time of 50mg/ml TC-HCI solution, in general, test specimens were similar to control. 3. In the porous surfaces, the control specimen showed spherical particles of titanium alloy and its surface have a few shallow ridges. The roughness of surfaces conditioned with tetracycline-HCI was lessened and seen crater-like irregular surfaces relative to the application time. In conclusion, pure titanium machined surfaces and SLA surfaces weren't changed irrespective of the application time of tetracycline-HCI solution. But the porous surfaces conditioned with tetracycline-HCI solution began to be slightly changed from 2 min. This results are expected to be applied to the regenerative procedures for peri-implantitis treatment.

• Food Engineering Progress
• /
• v.14 no.1
• /
• pp.65-74
• /
• 2010

Culture conditions of L. plantarum TJ-LP-002, the garlic resistant strain isolated from pakimchi (green onion kimchi), were investigated for the use of feed additives. Acetic acid, citric acid, lactic acid, and tartaric acid were detected in the culture supernatant, and especially the concentrations of lactic acid and acetic acid significantly increased during cultivation. The antimicrobial activity of L. plantarum TJ-LP-002 was not affected by proteases, calatase or cellulase, which showed that the antimicrobial activity might be due to the production of acids rather than proteinaceous antimicrobial substances. L. plantarum TJ-LP-002 was resistant to neomycin sulfate, spectinomycin dihydrochloride, and lincomycin hydrochloride, sensitive to streptomycin sulfate, and intermediate resistant to ampicillin trihydrate, chloramphenicol, erythromycin, tetracycline hydrochloride, and kanamycin sulfate. The optimum initial pH of medium, fermentation temperature and time for the cell growth and antibacterial activity were pH 7.0, 30${^{\circ}C}$ and 24hr, respectively. The optimal composition of culture medium for the cell growth and antimicrobial activity was 3%(w/v) glucose as a carbon source, 3%(w/v) yeast extract as a nitrogen source, and manganese sulfate and ammonium citrate as inorganic salts. The combinatorial supplementation of these inorganic salts, rather than sole addition as an inorganic salt, resulted in better antibacterial activity.

• Macromolecular Research
• /
• v.14 no.5
• /
• pp.530-538
• /
• 2006

There are three important components in tissue engineering: the cells, signaling factors (cytokines and growth factors), and scaffolds. To obtain finely engineered tissue, all three components should perform their individual functions and be fully integrated with each other. For the past few years, we have studied the characteristics of photodimerizable HA (CHA)/alginate (CA) composite materials. CHA/CA complex hydrogels, which were irradiated under UV light and, then treated with calcium ions, were found to have good biocompatibility, mechanical properties and water resistance for implantable tissue scaffolds. In this study, we introduced a cell growth factor (basic fibroblast growth factor; bFGF) into the CHA/CA scaffolds and studied its release behavior. We also introduced tetracycline hydrochloride and flurbiprofen into the same scaffolds as model activation factors and evaluated their release behaviors from the scaffolds. The drug release rate from the materials was influenced by various parameters, such as the degree of crosslinking, the cross linker type, the physico-chemical properties of the drug, and the amount of the drug in the polymer. The results indicated that the negatively charged CHA/CA composite materials showed sustained release behavior and that HA has a particularly strong negative charge, making it attractive toward tetracycline hydrochloride and bFGF, but repulsive toward flurbiprofen.

• Tuberculosis and Respiratory Diseases
• /
• v.41 no.5
• /
• pp.531-536
• /
• 1994

Background: The intrapleural instillation of tetracycline for pleural sclerosis had been most commonly used in patients with symptomatic malignant pleural effusion or recurrent pneumothorax for a long time. Unfortunately, at a time of expanding use of this agent, the production of injectable tetracycline hydrochloride used for pleurodesis was discontinued by its sole manufacturer in mid-1991 because the manufacturer was unable to meet US Food and Drug Administration purity standards. So we performed a preliminary study of doxycycline, as a alternative pleural sclerosant on rabbit pleura and compared its efficacy with that of tetracycline. Method: Eighteen New Zealand white rabbits weighing 2 to 3kg(mean 2.6kg) were devided into three groups. In each groups, one tetracycline(20 mg/ml/kg) and two doxycycline solutions(7 mg/ml/kg and 20 mg/ml/kg) instillated into the right pleural space through an 18-gauge angiocath with care to prevent pneumothorax. All rabbits were sacrificed after 28 days. Results: 1) In the group of tetracycline 20 mg/ml/kg(six rabbits), five rabbits showed partial pleural symphysis with several fibrous bands, and one rabbit died on 22th day. 2) In the group of doxycycline 7 mg/ml/kg(six rabbits), three rabbits showed partial pleural symphysis and the other three rabbits showed complete pleural symphysis without necrosis of underlying parenchymal lung tissue. 3) In the group of doxycycline 20 mg/ml/kg(six rabbits), two rabbits showed complete pleural symphysis without lung necrosis, another two rabbits showed complete pleural symphysis with lung necrosis, and the other two rabbits died on 4th and 13th day, respectively. Conclusion: We concluded that doxycycline is a highly effective sclerosing agent having stronger pleurodesis effect with that of tetracycline by dose base and its optimal dosage was considered as 7 mg/ml/kg with minimal complications.

• Journal of Aquaculture
• /
• v.19 no.4
• /
• pp.225-230
• /
• 2006

A long-term (26 weeks) feeding experiment was conducted to examine the essentiality and requirement of inositol in diets for olive flounder because no information is available in the species. Five casein-gelatin based semi-purified diets were formulated to contain four different levels of myo-inositol (0, 0+antibiotic, 400, 800, and 1600 mg/kg, designated as M0, M0+, M400, M800, and M1600, respectively). One (M0+) of the control diets contained tetracycline hydrochloride (0.4%, wt/wt) as an antibiotic to inhibit biosynthesis of inositol by micro-organism in intestine of fish. Olive flounder at the early juvenile stage (initial body weight 1.22 g) were randomly distributed into fifteen 35 L tanks (48 fish/tank) and fed with one of the experimental diets (3 replicates per diet). At the end of the feeding trial, the weight gain, feed intake, specific growth rate, and protein efficiency ratio of fish fed diets containing higher levels of myo-inositol (M800 & M1600) were significantly higher than those of fish fed the other diets (P<0.05). Feed conversion ratio, survival, hematocrits, and hemoglobin of fish fed experimental diets were not significantly different among all the fish groups. Whole body compositions of fish were not different except for lipid content. The lipid content was significantly different between M0 and M400 diet groups. These results indicate that juvenile olive flounder requires dietary supplementation of myo-inositol in diets for normal growth and its optimum level seems to be approximately 800 mg myo-inositol/kg diet.

• Journal of Periodontal and Implant Science
• /
• v.30 no.1
• /
• pp.145-157
• /
• 2000

Cytotoxic substances in dental calculus and root cementum of periodontally diseased teeth inhibit new attachment and regeneration. The purpose of scaling and root planing is to remove pathologic structures harboring these cytotoxic substances in order to create a biologically acceptable root surface. However, these procedures inevitably leave a non-biocompatible smear layer. Conventionally, the smear layer has been removed with low pH etching agents such as citric acid, phosphoric acid and tetracycline hydrochloride(TC). Lately, a supersaturated neutral pH etching solution of ethylene diamine tetraacetic acid(EDTA) has been found to be as effective as low pH etchants with respect to smear removal and to be superior in exposing root surfaceassociated collagen. The aim of the present study was to determine the effect of root surface treatment using EDTA on the initial attachment of human gingival fibroblasts. 27 human teeth, extracted due to severe periodontitis, were cut into dentin slices after root planing. The specimens were divided into TC group(treated with $50㎎/m{\ell}$ tetracycline-HCl, pH 1.52), EDTA group(treated with 17% EDTA, pH 7.4), and non-treated control group. After sterilization, 5th subcultured human gingival fibroblasts were seeded in each culture well containing a prepared root slice and incubated for 15 min., 60 min., and 4 hours in 5% $CO_2$ incubator at $37^{\circ}C$. At each incubation time, the number of attached fibroblasts were counted on the microphotographs taken at a magnification of x100. The difference of the number of attached cells between groups was statistically analyzed by the ANOVA followed by Duncan test in SPSS/PC＋programs. The results were as follows : 1. After incubation for 15 min, the attached cells were significantly more in EDTA group and TC group than non-treated control group(p<0.05), but there was no significance in the difference between EDTA group and TC group(p>0.1). 2. After incubation for 60 min and 4 hours, there was no significant difference in the number of attached cells between all groups(p>0.1). 3. In both EDTA group and TC group, there was no significant difference in the number of attached cells between different incubation(p>0.1). But in control group, the number of attached cells was significantly increased after incubation for 60 min, compared with incubation for 15 min(p<0.05). The above results suggest that root surface treatment using EDTA could enhance the initial attachment of gingival fibroblasts to root surface as effective as tetracycline-HCl.

• Korean Journal of Veterinary Research
• /
• v.27 no.2
• /
• pp.227-233
• /
• 1987

This study was conducted to determine the epidemiological characteristics of Campylobacter enteritis. A total of 187 fecal specimens of Korean native goat were examined for the presence of C. jejuni and C. coli by direct plating. Fifty strains isolated were examined for biochemical and serological properties and susceptibility to 19 chemotherapeutic agents. A total of 29(15.5%) C. jejuni and 21 (11.2%) C. coli were isolated from the fecal specimen of 187 Korean native goats. Of the 50 isolates of C. jejuni and C. coli, 29 isolates of C. jejuni grouped as 7 biotypes (1,2,3,4,6,7 and 8) and biotypes 1(34.5%), 2(17.2%) and 3(20.7%) were encountered most frequently. Twenty-one C. coli strains were differentated into biotype I (61.9% of the isolates) and biotype II (38.1%). Of the 29 C. jejuni strains examined, 24(83.0%) were typable by the Lior serotyping scheme and five isolates were non typable. C. jejuni grouped as 8 serotypes, serotype 4(24.1%) and 26(20.7%) were encountered most frequently. In the case of 21 strains of C. coli grouped as 6 serotypes, the most frequent serotypes were 21(28.6%) and 25(23.8%). Total of 50 strains of isolated were all susceptible to amikacin, clindamycin and tobramycine. Overall 85% of isolates were sensitive to erythromycin, doxycycline, chloramphenicol, flume-quine, kanamycin, gentamicin, nalidixic acid, polymyxin B, colistin, tetracycline and ampicillin, but about 65% of isolates were resistant to cefamandole and ethyl hydrocuprein hydrochloride.

• Membrane and Water Treatment
• /
• v.9 no.4
• /
• pp.211-220
• /
• 2018

Incorporating nano-materials in thin-film composite (TFC) membranes has been considered to be an approach to achieve higher membrane performance in various water treatment processes. This study investigated the rejection efficiency of three target compounds, i.e., reserpine, norfloxacin and tetracycline hydrochloride, by TFC membranes with different graphene oxide proportions. Graphene oxide (GO) was incorporated into the polyamide active layer of a TFC membrane via an interfacial polymerization (IP) reaction. The TFC membranes were characterized with FTIR, FE-SEM, AFM; in addition, the water contact angle measurements as well as the permeation and separation performance were evaluated. The prepared GO-TFC membranes exhibited a much higher flux ($3.11{\pm}0.04L/m2{\cdot}h{\cdot}bar$) than the pristine TFC membranes ($2.12{\pm}0.05L/m2{\cdot}h{\cdot}bar$) without sacrificing their foulant rejection abilities. At the same time, the GO-modified membrane appeared to be less sensitive to pH changes than the pure TFC membrane. A significant improvement in the anti-fouling property of the membrane was observed, which was ascribed to the favorable change in the membrane's hydrophilicity, surface morphology and surface charge through the addition of an appropriate amount of GO. This study predominantly improved the understanding of the different PA/GO membranes and outlined improved industrial applications of such membranes in the future.