• 정보처리학회논문지D
• /
• 제9D권1호
• /
• pp.103-110
• /
• 2002

컴포넌트 기반 소프트웨어 개발에서 컴포넌트 각각의 품질은 전체 소프트웨어의 품질을 결정하는 중요한 역할을 하므로 컴포넌트를 체계적으로 테스팅할 수 있는 전략이 필요하다. 일반적으로 컴포넌트를 테스팅하는 관점은 크게 컴포넌트 생산자 입장과 구매자 입장으로 구분할 수 있다. 본 논문에서는 컴포넌트 구매자 입장에서도 생산자의 산출물을 테스팅 근거 자료로 활용할 수 있도록 테스팅 도메인을 컴포넌트 생산자 입장에서 전개한다. 컴포넌트의 품질을 평가하기 위해 반복(Iteration) 테스팅 지침(Testing Guideline)에 중점을 두고 있는 현재의 RUP 테스팅 프로세스를 개선하여 컴포넌트 단위 테스팅에 초점을 맞춘 실질적인 프로세스를 구체적으로 제안하고 EJB 환경하에서 컴포넌트의 품질을 평가하는 사례 연구를 적용해 본다. 이를 통하여 본 논문에서 제시한 RUP기반 5단계 테스팅 프로세스가 컴포넌트의 품질평가를 위해 적용 가능한 것임을 보인다.

• The Journal of Korean Physical Therapy
• /
• 제7권1호
• /
• pp.43-49
• /
• 1995

The purpose of this study were to determine the effect of testing posture and elbow position on grip strength. Two hundred college students 100 males and 100 females aged 18 to 28 years, participated in the study. A Grip-Strength Dynamometer was used to measure the grip strength in two testing posture(sitting and standin) and four elbow position$(0^{\circ},\;45^{\circ},\;90^{\circ}\;and\;135^{\circ}\;flexion)$ correlations and t-test was used to determine any significant difference in grip strength between the testing posture and the elbow position. The results were as follows : 1. The grip strength was affected by testing pasture and flexion degree of elbow. 2. The grip strength was stronger in the standing than sitting in subjects 3. The grip strength decreased according to elbow flexion increase in subjects. 4. The higher grip strength gained in the standing with the elbow 0 flexion. 5. The grip strength by elbow flexion degree showed significant difference at sitting and standing posture. The grip strength was significant differenced by testing position at same elbow flexion degree.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권4호
• /
• pp.155-160
• /
• 2001

KS-code(KS B 0896) for nondestructive ultrasonic testing classifies the quality level by relative flaw size only. But flaw position is more important than the flaw size. Test blocks having artificial holes near surface show lower yield load than the blocks having deeply located holes from the surface. So, level calibration table was proposed for classifying the quality level of welded steel structures.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.964-968
• /
• 2007

The measurement of floor impact sound have been standardized in KS 2810-1 and 2. The height of receiving microphones position is specified in the standard as 1.2m which is almost half height of apartment rooms as a listening position. In this study, receiving positions are investigated by measuring the distribution of sound pressure levels at 792 receiving microphone positions in the standard testing building. Standard impact sources, tapping machine and impact ball, are driven on the center position in the source room where is located at the above floor. It was found that the distribution of sound pressure levels in the receiving room indicates significant deviation at different frequencies there is more than 5dB drop at 63Hz but 2dB rise at 125Hz at a height of 1.2m when the impact ball is driven, in the other case of a generating tapping machine there is more than 2dB rise at 125Hz at a height of 1.2m due to room modes.

• The Journal of Korean Physical Therapy
• /
• 제19권6호
• /
• pp.11-15
• /
• 2007

Purpose: This study examined the various patterns of standing to squatting activities, and reports the testing standard and phases for examining the standing to squatting position. Methods: One thousand, normal college students (500 males, 500 females) volunteered for this study. The patterns are performed by naked eye analysis with two video cameras. Results: The patterns from the standing to squatting position are as follows 1. parallel with the heel on the pattern: 2. parallel with the heel off the pattern: 3. closed with the heel on the pattern: 4. closed with the heel on the pattern: 5. open with the heel on the patternand 6. open with the heel on the pattern. Conclusion: The phases of the standing to squatting position are as follows: phase I from standing to the anterior parts of the knees reaching the anterior limit of the BOS, phase II from phase I until the height of the hip and knee joints are the same, phase III from phase II until there was no full squatting and the heels broke contact with the floor and phase IV from phase III full squatting on the heels in contact with the floor.

• 비파괴검사학회지
• /
• 제32권6호
• /
• pp.703-710
• /
• 2012

A structural health monitoring technique for locating impact position in a composite plate is presented in this paper. The method employs a single sensor and spatial focusing properties of time reversal(TR) and inverse filtering(IF). We first examine the spatial focusing efficiency of both approaches at the impact position and its surroundings through impact experiments. The imaging results of impact localization show that the impact location can be accurately estimated in any position of the plate. Compared to existing techniques for locating impact or acoustic emission source, the proposed method has the benefits of using a single sensor and not requiring knowledge of anisotropic material properties and geometry of structures. Furthermore, it does not depend on a particular mode of dispersive Lamb waves that is frequently used in other ultrasonic testing of plate-like structures.

• Asian Journal of Business Environment
• /
• 제4권4호
• /
• pp.19-26
• /
• 2014

Purpose - The study is primarily aimed at framing "Position Descriptions" for some key positions in the executive cadre of the testing department of CESC Limited. Research design, data, and methodology - The questionnaire, interview, and observation methods have been used for the purpose of data collection. The position descriptions are validated by superiors belonging to the respective departments. Results - It has been found that there is overlapping of job duties and job responsibilities in the department. This overlapping is quite alarming for the organization and may even become a hurdle in the path of its progress. It can be seen as a classic case of de-layering. Conclusions - The study concludes that good communication along with interpersonal and negotiation skills are absolutely essential to facilitate the performance of the day-to-day duties of a job, including handling the union, solving IR related issues, development of the subordinates, job setting, distribution and allocation, etc. Position descriptions will help in the alignment of the employee direction, and can be a useful tool to aid the communication between management and employees.

• 비파괴검사학회지
• /
• 제23권1호
• /
• pp.30-37
• /
• 2003

수동 초음파검사를 자동검사로 대체하기 위해서는 탐촉자의 위치정보를 정확하게 제어할 수 있는 주사장치가 필수적이다. 위치정보를 알기 위하여 기존의 모터제어 주사장치에서는 엔코더를 사용하고 있으며 엔코더는 여러 가지 측면에서 많은 장점을 가지고 있으나 주사 중에 미끄러짐(slip)이 발생하면 엔코더 위치정보의 정확도에 많은 오차가 포함되게 된다. 따라서, 미끄러짐이 있는 경우의 위치정보는 무의미하게 되며, 자동초음파검사의 신뢰도는 큰 문제가 된다. 그러므로 미끄러짐을 피해야 하나 현재는 이를 완전히 해결하는 방법은 없는 상태이다. 본 논문에서는 이와 같은 문제점을 해결하고 엔코더를 대체할 수 있는 새로운 개념의 초음파검사 자동 주사장치의 위치 제어기술을 제안하고 이 방법이 실제 사용 가능함을 확인하였다 즉, 주사하고자 하는 직선 영역에 송신용 표면파 탐촉자를 부착하고 주사장치에 부착된 수신용 탐촉자에서 표면파를 수신하여 현재의 주사장치의 위치를 계산하고 이를 바탕으로 주사하고자 하는 거리만큼의 주사장치의 이동을 제어할 수 있다.

• International Journal of Quality Innovation
• /
• 제8권1호
• /
• pp.137-153
• /
• 2007

Failure mode and effects analysis (FMEA) is a preventive technique in reliability management field. The successful implementation of FMEA technique can avoid or reduce the probability of system failure and achieve good product quality. The FMEA technique had applied in vest scopes which include aerospace, automatic, electronic, mechanic and service industry. The marking process is one of the back ends testing process that is the final process in semiconductor process. The marking process failure can cause bad final product quality and return although is not a primary process. So, how to improve the quality of marking process is one of important production job for semiconductor testing factory. This research firstly implements FMEA technique in laser marking process improvement on semiconductor testing factory and finds out which subsystem has priority failure risk. Secondly, a CCD position solution for priority failure risk subsystem is provided and evaluated. According analysis result, FMEA and CCD position implementation solution for laser marking process improvement can increase yield rate and reduce production cost. Implementation method of this research can provide semiconductor testing factory for reference in laser marking process improvement.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.37-44
• /
• 2001

Ultrasonic testing has a characteristics such as excellent permeability, high-sensitivity to find defect and an almost exact measurement for position. size and direction of inner defect, which differ from other non-destructive testing. In the study, we developed program into optimal testing condition, to distinguish obstacle echo and defect position. This program shows generation and processing of ultrasonic pulse. We compared simulation with ultrasonic test in 45$^\circ$, 60$^\circ$and 70$^\circ$transducer. Test results were in accordance with simulation within 0.1~7.2%.