• Journal of the Korea Institute of Building Construction
• /
• v.24 no.4
• /
• pp.393-402
• /
• 2024

The Korean Industrial Standard(KS) KS F 2527("Aggregates for Concrete") does not explicitly define criteria for clay mineral content in aggregates. This lack of clear quality standards and testing methodologies is further compounded by a scarcity of relevant research within both academic and industrial spheres. Consequently, the construction industry, encompassing both aggregate production and utilization, often overlooks the management of clay mineral content due to its perceived economic implications. This study addresses this gap by investigating the current state of regulations concerning clay mineral content in aggregates, exploring the causes of its occurrence, and evaluating its impact on concrete performance. The chemical composition of the clay minerals was determined to primarily consist of Al₂O₃, Fe₂O₃, and SiO₂, which are commonly found in clay. X-ray diffraction(XRD) analysis revealed that the predominant clay minerals were montmorillonite and illite, both known for their high absorption capacity. An examination of domestic and international standards for clay mineral content in aggregates demonstrated that the density and absorption rate specifications outlined in KS F 2527("Aggregates for Concrete") only offer indirect estimations of clay mineral levels. Furthermore, the investigation into the influence of clay mineral content on concrete performance suggests that a higher clay mineral content necessitates a corresponding increase in the unit quantity of aggregates to maintain adequate workability. This, however, has a detrimental effect on the compressive strength of the concrete.

• Journal of Radiation Protection and Research
• /
• v.40 no.4
• /
• pp.223-230
• /
• 2015

The objective of this study is to identify the radionuclide distribution in public water by carrying out the analysis of artificial radionuclides($^{134}Cs$, $^{137}Cs$, $^{239+240}Pu$), natural radionuclide($^{210}Pb$) and TOC in the lake Euiam sediment in Chuncheon, South Korea. The $^{134}Cs$ concentration in all lake sediments showed below MDA values, and the $^{137}Cs$ concentration in lake sediment were ranged from MDA to $8.79Bq{\cdot}kg^{-1}-dry$. The $^{137}Cs$ concentrations in surface sediment were reported to be 2.4 to $4.2Bq{\cdot}kg^{-1}-dry$. The lowest concentration of $^{137}Cs$ was reported at St. 4 and the highest concentration was reported at St. 3, respectively. The $^{239+240}Pu$ concentration in lake sediment were ranged from 0.049 to $0.47Bq{\cdot}kg^{-1}-dry$. The lowest concentration was reported at St. 2 and the highest concentration was reported at St. 3. The correlation(r) between the $^{239+240}Pu$ concentration and $^{137}Cs$ concentration in lake sediment presented higher values (0.54 to 0.97) and this suggests the behavior and origin of $^{137}Cs$ is identical to the $^{239+240}Pu$ in the sediment. The $^{134}Cs$ concentration below MDA value and the $^{239+240}Pu/^{137}Cs$ ratio(mean value of 0.041) indicated that the artificial radionuclides in the sediment were originated from global fallout by the atmospheric testing of nuclear weapons conducted by former USSR and U.S.A, but not from the Fukushima Daiichi NPP accident. The sedimentation rate derived from $^{210}Pb$ age-dating method at St. 2 is calculated to be $0.31{\pm}0.06cm{\cdot}y^{-1}$. This value is similar to the value ($0.41{\pm}0.05cm{\cdot}y^{-1}$) estimated from the $^{137}Cs$ maximum peak produced from early 1960's. The content of TOC in lake Euiam sediments varied from 0.20 to 13.01%. While the highest correlation between TOC and $^{137}Cs$ concentration in the sediment were found at St. 1, the others presented the low correlation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.1
• /
• pp.46-49
• /
• 1998

Being latecomers to the industrialization, Pacific rim countries except the U.S.A. are doing very little in developing the universal certification system. One should note that Asian Pacific region enjoys the highest economic growth rate, and there is a good possibility that it will be the center of economic activities of the world in the next century. It appears that ISO and CEN share similar specifications in numerous areas. ASNT is being changed to cope with the trend with the introduction of ACCP. Although we may have to adopt the new system someday, we should pay attention and make concerted effort to include our own practice in the global standards. We are the countries in the Far East Region with similar culture and tradition, which are quite different from those of western countries. We hope that Japan should play an important role in this matter, who has been chaired the ISO TC135 since 1993. In the beginning of this decade, there has been a trivial but troublesome matter that who is representing the NDT Society or member countries in Asia-Pacific Conference on NDT. The problem appears to be solved since the establishment of FENDT For the next decade, actually next centry, FENDT will have to accomplish another important role for countries in the Far East Region to form a strong coalition for its survival in the western dominant world. Immediate issue is to establish Far East Working Group for Harmonization and Mutual Recognition of Qualification and Certification of NDT Personnel. To realize this Japan must play a leading role with the cooperation of expanded FENDT member countries including China and Russia. As the continued prosperity expected in this region, FENDT should continue its role for the next centry. We, the FENDT countries, must move forward for internationalization(國際化). However' we must realize that it all start from SELF IDENTI-FICATION. We can identify ourselves by actively participating in FENDT. I would like remind you the concluding remark that I have made in the congratulatory speech at JSNDI 40th Anniversary Conference and FENDT'92. JSNDI is too precious to be Japan's sole possession Staling from the Far East, JSNDI shall become one of the loaders of the world. I sincerely hope that JSNDI take initiatives and leaderships in the future activities. of FENDT countries. I would like to close my talk with "We must hang together, or We shall be hang seperately." Garn Sa Ham Ni Da.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.6
• /
• pp.53-60
• /
• 2007

L/EPS, manufactured in the shape of block and used for civil engineering, is a lightweight material with an excellent resistance to compression, and provides a superb self-sufficient stability. EPS is a suitable material capable of resolving the problem of settlement and lateral flow if it is applied as the soil on soft ground. The Korean Standards (KS) has not yet proposed any testing method for use of EPS as an engineering banking material. Only its testing and quality ordinance as a heat insulation material has been standardized. The design criteria for EPS has been established and applied through the trial construction of KHC (Korea Highway Corporation) and quality test of manufacturer, but most studies on them have been confined to factory products. This study is focused on comparing and analyzing long-term durability by conducting cyclic load test, freezing and thawing test, absorption rate test and others. EPS used in the test was chosen from construction sites and factory products, focusing on the long-term durability of EPS depending on the passage of time. Unconfined compression test results indicated that the strength of collected samples was lower than factory products. While the triaxial compression test results indicated that the shear strength increased in proportion to the increase of confining pressure, and factory products had declining shear strength as the confining pressure rose.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.229-237
• /
• 2011

The pullout test is a nondestructive testing method certified by the American Society for Testing and Materials (ASTM) and British Standards (BS). Research has shown that it is very reliable in terms of evaluating the concrete strength of reinforced concrete members. However, the pullout test is rarely performed on domestic construction sites due to the complex procedures and high costs involved. This study proposes a new pullout test composed of a post installable break-off bolt, an insert nut, and a pullout tester, which satisfy both economical and practical purposes on a construction site. Three different types of special fastening methods, a temporary fixed bolt, a plastic fixed panel, and a fixed bar, have been developed. A pullout tester is proposed that is driven by the circle force introduced into a handle composed of eight gears without a load cell and a hydraulic cylinder. The serviceability and reliability of these instruments were investigated through experiments at construction sites. Furthermore, the sample pullout test with a wall specimen was conducted to estimate the usefulness of the temporary fixed bolt type of fastening methods and pullout devices. Eventually, the developed instruments will be useful on construction sites if minor requirements are met.

• Economic and Environmental Geology
• /
• v.51 no.5
• /
• pp.429-438
• /
• 2018

Since concrete is a hardened aggregates of various materials, it needs to be crushed for chemical analyses. However, the effect of sample crushing on the analytical results has not been precisely assessed till today. In this study, we prepared concrete test pieces using Portand cements and fly ashes as binding materials, and ponded ashes and sands as aggregates and analyzed the heavy metals of the test pieces using Standards for Fair Testing of Soil Contamination (SFTSC) and Wastes (SFTW). For this, each test piece was partially crushed at first and sieved for separation of grains of <0.15 mm, 0.15-0.5 mm, and 0.5-5 mm from the same crushed samples (Crushing Method I). Results of those samples using SFTSC showed a clear trend that analyzed heavy metal concentrations are higher in the finer fractions. Particularly, fractions with <0.15 mm indicated much higher concentrations than the theoretical ones, which were calculated based on the concentrations of individual materials and their mixing fractions. In contrast, the analytical results were generally comparable with the theoretical ones when the test pieces were totally pulverized such that all the crushed grains were <0.15 mm in size (Crushing Method II). These results are associated with the fact that cement materials and fly ashes, which are high in heavy metals relative to other materials, are enriched in the fine fractions. The analytical results using the SFTW derived very low concentrations in most of parameters and did not indicate the dependence of concentrations on the crushing methods due to using distilled water as leaching agent.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.4
• /
• pp.333-346
• /
• 2002

The continuous indentation techniques are one of the most effective methods to nondestructively estimate mechanical properties. There are many applications in various dimensions of materials from macro-scale, through micro-scale, even to nano-scale range. The macro-range technology of kgf-load level is now focused on the evaluation of tensile properties and residual stress of bulk materials, for example, used in conventional load-bearing structures and in-use pipelines. The technology and the apparatus were successfully developed by a domestic research group. The micro-range technology of gf-load level can be applied to investigate some property-gradient materials such as weldment. Because it has better spatial resolution than the macro-range technology. The nano-range technology (called nanoindentation technique) of mgf-load level is basically used to evaluate hardness and modulus of micro- and nano-materials. Moreover, many researches are going on to measure tensile properties and residual stress. The nanoindentation technology is easy to be applied to the various fields, such as semiconductor devices, multiphase materials, and biomaterials, though other methods are too difficult to be applied due to dimensional or environmental limitations. On the basis of these accomplishments, the international and the domestic standards are being established.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.701-708
• /
• 2019

Animal glue is a natural adhesive made from processed skins or bones of animals. It is widely used in wooden crafts, papercrafts, dancheong painting, and pictures. Accurate evaluation of the quality of animal glues during production and use is difficult because there is no formal method for testing the glue's properties during pretreatment and measurement conditions. Thus, in this study, a series of tests were carried out by changing the conditions of swelling, temperature, and concentration of animal glue and gelatin sold on the market. Twelve types of animal glues were evaluated, having a viscosity range of 12.67 cP to 29.43 cP. The results showed that the physical characteristics of the glues were stable when allowed to swell for six h in distilled water(23℃). When 10%(by weight in distilled water) of the animal glue was measured in the reflective mode of a spectrophotometer, the optical characteristics of the glues were stable. Powdered animal glues have a medium brightness and middle-high chroma. Relative to powdered glues, stick animal glues have a low brightness and a medium chroma. Based on the results of this study, it is expected that the data can be assembled into a form so that animal glue workers can use it as a reference for the preparation of evaluation standards for testing the characteristics of animal glues.

• Journal of Distribution Science
• /
• v.11 no.12
• /
• pp.71-81
• /
• 2013

Purpose - This study investigated the effects of consumers' selection criteria for environment-friendly agricultural products on purchase intention and the effects of consumers' attitudes and the reliability of environment-friendly agricultural products on purchase intention by using the theory of planned behavior. Subjective norms of variables of behavioral intention, attitudes toward behavior and control of the behavior were used to create selection criteria, consumers' attitudes and reliability of environment-friendly agricultural products. The study investigated the effects of consumers' selection criteria, attitudes, and reliability of environment-friendly agricultural products on purchase intention constructing models and hypotheses of mediation and moderation between selection criteria for agricultural products and purchase intention by consumers' attitudes and reliability. Research design, data, and methodology - The findings were as follows: first, consumers' selection criteria for environment-friendly agricultural products had a significantly affirmative influence upon purchase intention. Health was the most important factor of selection criteria convenience was more important than quality and familiarity was next. Consumers' attitudes and trust had a significant influence on purchase intention. Second, testing showed that consumers' attitude and trust partially mediated selection criteria: sub-factors and purchase intention were important in selection criteria. Third, testing showed that consumers' attitude and trust had a significant moderation effect between selection criteria and purchase intention. In the test of the moderation effect between sub-factors of selection criteria and purchase intention, consumers' attitude had a significantly positive influence upon health, convenience, and familiarity, and had no significant influence upon quality and purchase intention. Consumers' trust had no significant influence upon health, convenience, and quality. Results - The study provided several theoretical implications: first, an empirical analysis was undertaken with selection criteria for environmental-friendly agricultural products, consumers' attitude, and trust to investigate subjective norms, attitude toward behavior and control of behavior based on the theory of planned behavior. Second, this study investigated both the mediation effect and moderation effect of consumers' subjective norms on attitudes toward behavior, the mediating effects of perceived behavior control and changes of behavioral intention depending upon size and direction of the variables. This study also provided several practical implications. Conclusions - First, consumption of environment-friendly agricultural products did not increase despite rapid increase of production therefore, promotion of consumption and distribution was needed considering the supply and demand of the products. Second, definite standards for selection criteria were suggested to build up consumers' attitude and trust. Consumers' attitude could be improved by factors including the brand of environment-friendly agricultural products, consistent quality, solving physiological problems caused by adverse effects of environmental problems, supplementary approaches, treatment of adverse effects by eating food, and the development and supply of products in accordance with changes of lifestyle. Finally, consumers' demand for sub-factors of selection criteria could be much higher than health, convenience, and quality of the products. Therefore, a process was needed that could continuously check consumers' needs for the products. Limitations were described at the end of the study.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.5
• /
• pp.332-340
• /
• 2015

Acoustic emission (AE) is an effective nondestructive test that uses transient elastic wave generated by the rapid release of energy within a material to detect any further growth or expansion of existing defects. Over the past decades, because of environmental issues, the use of compressed natural gas (CNG) as an alternative fuel for vehicles is increasing because of environmental issues. For this reason, the importance and necessity of detecting defects on a CNG fuel tank has also come to the fore. The conventional AE method used for source location is highly affected by the wave speed on the structure, and this creates problems in inspecting a composite CNG fuel tank. Because the speed and dispersion characteristics of the wave are different according to direction of structure and laminated layers. In this study, both the conventional AE method and the energy based contour map method were used for source location. This new method based on pre-acquired D/B was used for overcoming the limitation of damage localization in a composite CNG fuel tank specimen which consists of a steel liner cylinder overwrapped by GFRP. From the experimental results, it is observed that the damage localization is determined with a small error at all tested points by using the energy based contour map method, while there were a number of mis-locations or large errors at many tested points by using the conventional AE method. Therefore, the energy based contour map method used in this work is more suitable technology for inspecting composite structures.