• 비파괴검사학회지
• /
• 제24권1호
• /
• pp.64-85
• /
• 2004

• 분석과학
• /
• 제23권3호
• /
• pp.255-260
• /
• 2010

환경부에서는 오염물질 다량 방출 건축자재의 효율적인 관리를 위해 "다중이용시설 등의 실내 공기질 관리법" 중 접착제의 시험방법과 방출관리기준을 동시에 개정하였다. 따라서 기존 관리수준과 개정 관리수준의 직접적인 비교가 불가능하다. 이 연구에서는 접착제의 개정된 시험방법의 각 요소들이 오염물질 방출강도에 미치는 영향들을 기존 시험방법과 비교하여 검토하였다. 이를 통하여 개정된 오염물질 방출관리기준을 평가하였다. 그 결과 접착제는 시험기간의 변경으로 인해 방출강도가 약 2.5배 약화되었고 건조시간의 변경에 따른 방출강도의 차이는 거의 없는 것으로 나타났다. 시험방법의 변경된 내용을 적용한 TVOC 방출 관리기준은 기존 방출 관리기준에 비해 약 2.1배 강화된 것으로 나타났다.

• 한국해양공학회지
• /
• 제24권2호
• /
• pp.74-81
• /
• 2010

Ship STEP is the international standard for the exchange of ship modeling data between heterogeneous systems. It is expected that STEP AP218 can be used for seamless data exchange between various CAD/CAM/CAE systems used in the shipbuilding design process. Although the conformance assessment for standards would maximize the performance and confidence about data exchanges, most research has been directed toward interoperability testing. ISO SC4/TC184 only provides the method for conformance testing, and it can be used with test cases on application protocols. Even though standards have been defined for conformance assessment and testing, there is no organization or association. CAD vendors have focused on interoperability testing for evaluation of the performance of their systems. In this paper, the conformance testing criteria for AP218 have been developed with abstract test cases of ship structures. The requested STEP translator was also reviewed with a developed item pool of testing criteria. The criteria methodology would be a guideline for the development of translators and interfaces. The item pool method of testing criteria for conformance assessment would increase performance and efficiency of data translators for Ship STEP and other standards.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1443_1444
• /
• 2009

A study on the environmental tests for auxiliary and control circuits of high voltage switchgears, especially testing condition and requirements, according to the relevant international standards has been briefly reviewed in this paper. As the highest supply voltage of electric power systems have been progressed, testing techniques and testing standards such IEC codes improved and revised keeping step with it. Especially IEC 62271 series, which are applicable to the HV-class switchgears and controlgears have been revised in 2008 newly. In this paper, the special consideration and background information of environmental testing condition with mechanical operating performance, e.g. operation in a higher and lower ambient temperature, for the auxiliary and control circuits of switchgears and controlgears and considerable investigation to the related international standards have been provided. Examples of testing performed were showed and analysis of their test results have been described.

• 비파괴검사학회지
• /
• 제3권1호
• /
• pp.5-11
• /
• 1983

The impulse response function are studied using time domain Born approximation in two cases; firstly when the material parameters of a flaw are constant, secondly when the parameters are varying with positions. From the impulse response functions, characteristics can be learned about a flaw with high symmetry.

• 비파괴검사학회지
• /
• 제2권2호
• /
• pp.52-55
• /
• 1983

• 한국광학회지
• /
• 제16권1호
• /
• pp.56-62
• /
• 2005

후면투사방식의 CRT(Cathod Ray Tube) 고화질 텔레비젼용 광학엔진은 큰 화면과 굽은 필드 때문에 일반적인 전방검사 MTF(modulation transfer function)로는 측정이 어렵다. 이러한 광학엔진의 MTF를 측정하기 위하여 광학엔진이 놓인 물체면과 상분석기의 위치를 서로 바꾸는 후방검사 MTF방법을 제안하고 이에 따른 MTF 측정장비를 구성하였다. 이러한 CRT HDTV용 광학엔진을 위한 후방검사 MTF측정법은 작은 수치개구(NA), 낮은 분해능, 긴 초점심도들 때문에 정밀도가 낮아지는 전방검사 MTF 측정법보다 사용하기가 훨씬 더 좋으며, 정렬이 매우 용이하고 측정반복성이 매우 좋다. 이 방법으로 측정한 MTF값과 설계된 MTF를 비교함으로써 이 방법의 신뢰성을 확인하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권1호
• /
• pp.27-36
• /
• 2006

It is increasingly important to ensure that a given vibration test specification of a particular machinery component is appropriately established by considering its real environmental conditions. Vibration test standards for electrical components are well documented, for example in an IEC 60068 series, while standards for machinery components are rarely found except a few military standards. Thus many vibration tests are performed based on the military standards. However, a test based on these military standards often results in over-testing, and under-testing in some cases due to the different environmental conditions. Also, these standards require an appropriate tailoring that may not be easily accomplished. In this paper, various international and military standards are compared and investigated to obtain test specifications relevant for machinery components. Also appropriate tailoring methods are demonstrated through a case study.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 봄 학술발표회 논문집
• /
• pp.20-23
• /
• 1990

In order to evaluate the difference of testing results in the standards on the compressive strength of various countries, we have compared the testing results of the compressive and flexural strength, one of the most important properties of cement, obtained on the various standards(KS, JIS, BS, ASTM) and the statistical method was used to evaluate the results.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1149-1154
• /
• 2010

Liquid chromatography/mass spectrometry using isotope dilution method has been established as a primary method for the measurement of cortisol in human serum. Verification of this method was accomplished by the participation in Consultative Committee for Amount of Substance-Metrology in Chemistry (CCQM) pilot study. Two levels of cortisol certified reference materials were prepared and certified by the established method. They were used as sample materials for the proficiency testing. The expanded uncertainty in the measurement of cortisol in human serum was approximately 1.2% at 95% confidence level. The results of the proficiency testing showed a good precision among the participants, but some bias to the certified values. This means that commercial field laboratories should keep traceability chain to SI unit through available reference measurement procedures and/or available reference materials.