• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1065-1068
• /
• 1998

This paper proposes a new test generation method. Most of the test generation methods are gate-level based, but our scheme is VHDL based, especially in other word, behavioral-level based. Our test pattern generation method uses software test method. And we generate deterministic test pattern with this method. The purpose of our method is to reduce the time and effort to generate the test patterns for the end-product test of IC.

• 정보처리학회논문지D
• /
• 제11D권4호
• /
• pp.885-892
• /
• 2004

소프트웨어 시험단계에 투입되는 노력의 분포를 추정하는 대표적인 모델로 Weibull 분포(Rayleigh와 지수분포 포함)가 있다. 이 모델은 시험 시작시점에서 실제로 많은 노력이 투입되는 점을 표현하지 못한다. 또한 다양한 형태를 갖고 있는 실제 시험 노력의 분포를 적절히 표현하지 못하고 있다. 이러한 문제점을 해결하기 위해 본 논문은 시그모이드 모델을 제안하였다. 신경망 분야에서 적용되고 있는 시그모이드 함수로부터 소프트웨어 시험 노력을 적절히 표현할 수 있도록 함수 형태를 변형시켰다 제안된 모델은 다양한 분포 형태를 보이고 있는 실제 수행된 소프트웨어 프로젝트로부터 얻어진 6개의 시험 노력 데이터에 적용하여 적합성을 검증하였다. 제안된 시그모이드 모델은 기존의 Weibull 모델보다 성능이 우수하여 소프트웨어 시험노력을 추정하는데 있어 와이블 모델의 대안으로 채택될 수 있을 것이다.

• Nuclear Engineering and Technology
• /
• 제42권6호
• /
• pp.704-711
• /
• 2010

Modal testing requires measuring the vibration of many points, for which an accelerometer, a gab sensor and laser vibrometer are generally used. Conventional modal testing requires mounting of these sensors to all measurement points in order to acquire the signals. However, this can be disadvantageous because it requires considerable measurement time and effort when there are many measurement points. In this paper, we propose a method for modal testing using a camera image. A camera can measure the vibration of many points at the same time. However, this task requires that the measurement points be classified frame by frame. While it is possible to classify the measurement points one by one, this also requires much time. Therefore, we try to classify multiple points using pattern recognition. The feasibility of the proposed method is verified by a beam experiment. The experimental results demonstrate that we can obtain good results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.132-139
• /
• 2008

The blade vibration problem of bladed disk is the most critical subject to consider since it directly affects the stable performance of the engine as well as life of the engine. Especially, due to complicated vibration pattern of the bladed disk, more effort was required for vibration analysis and test. The research of measuring the vibration of the bladed disk, using NSMS(Non-intrusive stress measurement) instead of Aeromechanics testing method requiring slip ring or telemetry system with strain gauge, was successful. These testing can report the actual stresses seen on the blades; detect synchronous resonances that are the source of high cycle fatigue (HCF) in blades; measure individual blade mis-tuning and coupled resonances in bladed disks. In order to minimize the error being created due to heat expansion, the tip timing sensor is installed parallel to the blade trailing edge, yielding optimal result. Also, when working on finite element analysis, the whole bladed disk has gone through three-dimensional analysis, evaluating the family mode. The result of the analysis matched well with the test result.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.871-876
• /
• 2008

The blade vibration problem of bladed disk is the most critical subject to consider since it directly affects the stable performance of the engine as well as life of the engine. Especially, due to complicated vibration pattern of the bladed disk, more effort was required for vibration analysis and test. The research of measuring the vibration of the bladed disk, using NSMS(Non-intrusive stress measurement) instead of Aeromechanics testing method requiring slip ring or telemetry system with strain gauge, was successful. These testing can report the actual stresses seen on the blades; detect synchronous resonances that are the source of high cycle fatigue(HCF) in blades; measure individual blade mis-tuning and coupled resonances in bladed disks. In order to minimize the error being created due to heat expansion, the tip timing sensor is installed parallel to the blade trailing edge, yielding optimal result. Also, when working on finite element analysis, the whole bladed disk has gone through three-dimensional analysis, evaluating the family mode. The result of the analysis matched well with the test result.

• 한국음향학회지
• /
• 제25권6호
• /
• pp.305-311
• /
• 2006

본 논문에서는 성층화된 천해 음향도파관 환경에서 빔-시간 강도 패턴을 이용한 음원 거리추정 기법인 배열 불변성 이론에 대한 성능을 분석하였다. 기존의 수중음원 위치추적 방법으로 잘 알려진 정합장 처리, 음향도파관 불변성 추정법 등에 비해 계산량을 절감 할 수 있고, 배열 이득을 충분히 활용할 수 있는 이점을 가진다. 또한, 기타 간섭 신호원의 영향을 크게 받지 않는 상황에서는 수중 환경에 대한 자세한 사전정보가 요구되지 않는다. 기존의 수중 음원 위치 추정법들에 비해 간단하고 순간적인 음원의 거리 추정이 가능한 배열 불변성 방법의 성능을 분석하기 위해 모의 음파 전달 음장을 이용한 시뮬레이션을 수행하였다. 광대역을 가지는 수중 충격성 음원에 대하여 SNR 에 따른 거리 추정 결과를 나타내었고 고주파 신호의 다중경로 전파 현상을 억제시키기 위해 공간 스무딩 기법을 적용하였다. 거리추정 성능을 분석한 결과, SNR 10dB의 환경에서 20% 내의 오차율을 보였다.

• KIEAE Journal
• /
• 제15권2호
• /
• pp.19-26
• /
• 2015

Purpose: Maximizing human comfort in design of medical environments depends immensely on specialized architects particularly critical care design; the study proposes Evidence-Based Design as an apparent analog to Evidence-Based Medicine. Healthcare facility designs are substantially based on the findings of study in an effort to design environments that augment care by improving patient safety and being therapeutic. On SPSS (Statistical Package for Social Science) t-test is applied to simulate two independent variables of PDR (Pre Design-Research) and POE (Post- Occupancy Evaluation). PDR is conducted on relatively new hospital Hallym University Dongtan Sacred Heart Hospital to analyse visibility from researchers' point of view, here the ICU is arranged in I-Shape. POE is applied on Dongguk University Ilsan Hospital to simulate walking on LogWare where two NS are designed based on L- Shape and Seoul St. Mary's Hospital, The Catholic University of Korea where five NS are functional for ICU Intensive Care Unit, Surgical Intensive Care Unit (SICU), Medical Intensive Care Unit (MICU), Critical Care Unit (CCU), Korean Oriental Medical Care Unit which are mostly arranged in U-Shape, and walking pattern is recognized to be in a zigzag path. Method: T-Test is applied on two dependent communication variables: walkability and visibility, with confidence interval of 95%. This study systematically analyses the Nurse Station (NS) typo-morphology, and simulates nurse horizontal circulation, by computing round route visits to patient's bed, then estimating minimum round route on LogWare stop sequence software. The visual connectivity is measured on depth map graphs. Hence the aim is to reduce staff stress and fatigue for better patients care by minimizing staff horizontal travel time and to facilitate nurse walk path and support space distribution by increasing effectiveness in delivering care. Result: Applying visibility graph and isovist field on space syntax on I- Shape, L- Shape and U- Shape ICU (SICU, MICU and CCU) configuration, I-shape facilitated 20% more patients in linear view as they stir to rise from their beds from nurse station compared to U-shape. In conclusion, it was proved that U-Shape supply minimum walking and maximum visibility; and L shape provides just visibility as the nurse is at pivot. I shape provides panoramic view from the Nurse Station but very rigorous walking.