• 한국신뢰성학회지:신뢰성응용연구
• /
• 제12권1호
• /
• pp.47-56
• /
• 2012

Reliability demonstration tests with zero-failure acceptance criterion are most commonly used in the field of reliability application since they require fewer test samples and less test time compared to other test methods that guarantee the same reliability with a given confidence level. For products with lognormal lifetime distribution, an economic zero-failure test plan is developed that minimizes the total cost related to perform a life test to guarantee a specified reliability of a product with a given confidence level. A numerical example is provided to illustrate the use of the proposed test plan.

• 토지주택연구
• /
• 제8권3호
• /
• pp.201-210
• /
• 2017

Recently, as a part of measures against large-scale natural disasters in Korea, disaster prevention matters are strengthened in urban planning. With the introduction of the disaster vulnerability analysis system, plans for disaster prevention are being reinforced in urban planning. However, there are many problems to be solved at the stage of operation and practical application of the law. When disasters occur, we are focusing on response and recovery plans. Therefore, it is not enough to construct a comprehensive disaster prevention system to prevent disasters in advance. The established disaster prevention plan is difficult to plan management centered on disaster prevention due to factors such as economic efficiency, convenience, and comfort. This study is a basic study for supporting disaster prevention mitigation plan. For this purpose, the analysis of the actual situation of disaster prevention plan at home and abroad and improvement plan were derived. ased on these improvement plans, we have developed a method to apply the element technology of urban design to the test bed to reduce sediment disaster. The test bed was investigated and examined in the disaster hazard area of Busan and Seongnam city. And the defense technology is applied to the selected site, and the basis of the disaster prevention plan and design is proposed. If the proven techniques are reflected from the urban planning stage, it will be possible to contribute to the mitigation of sediment disaster caused by the city.

• 한국환경과학회지
• /
• 제32권1호
• /
• pp.11-24
• /
• 2023

This study aimed to provide preliminary data for the improvement of the tree doctor qualification test (first written test), which was newly created by enforcing the Forest Protection Act on June 28, 2018., The high demand for system improvement accelerated this study. The results were analyzeds through literature and questionnaire surveys. Writing test questions and the license of the tree doctor qualification exam are currently managed by the Korea Forestry Research Institute, and it is deemed that the test should be entrusted to Human Resources Development Service of Korea for fair and transparent management. Additionally, the plan for the improvement of the subject-wise scope of examination questions writing, difficulty of test questions, and acceptance rate of the first test should be prepared after public hearings or seminars related to the examination questions.

• 복식문화연구
• /
• 제5권1호
• /
• pp.151-164
• /
• 1997

This study pursues the problems of plan photogrammetry which is widely used in somatotyping at present, and find out a method which can improve accuracy of measurement on the basis of principles and mechanisms of photography-the basic foundation of the photographic analysis methods. As a result, this study proposes a new method which is based on the reference point method and perspective coordinate system. And the test measurement was operated to compare the measurement accuracy of the proposed method and the method based on reference grid screen method and perpendicular coordinate system which is commonly used at present. The result of this test measurement showed that the proposed method has higher accuracy. Two reasons can be pointed out for the improvement of measuring accuracy. The first reason is that the proposed perspective coordinate system reduces the perspective distortion of photography. And second reason is that measuring points can be closely placed to the scale and coordinate reference plan of measurement by the proposed reference point method which make possible to place measuring object (or person) at the center of scale and coordinate reference plan by utilizing reference points of measurement in the three dimensional space not on screen.

• 한국체육학회지인문사회과학편
• /
• 제58권1호
• /
• pp.217-228
• /
• 2019

이 연구는 여가시간 신체활동 의도와 운동행동 간의 관계에서의 틈(gap)을 극복하고 이 관계를 잇는 매개 변인들의 역할을 검증하고, 기존의 계획행동이론의 확장을 도모하는데 목적을 두었다. 이에 여가시간 신체활동에 대한 의도와 운동행동 간의 관계에서 실천계획-1)극복계획과 2)실행계획-의 매개효과를 검증하였다. 연구의 목적을 달성하기 위하여 편의표집법을 활용하여 강원도 내 위치한 세 곳의 대학에서 교양체육에 참여하고 있는 대학생 253명(남학생=118; 여학생=105)을 대상으로 설문조사를 하였다. 수집된 자료는 SPSS와 Amos프로그램을 활용하여 분석되었으며, 기술통계, 신뢰도, 상관분석, 그리고 구조 관계를 검증하기 위해 구조방정식 모형을 적용하여 의도, 극복계획 및 실행계획, 그리고 여가시간 신체활동 및 운동 간의 관계를 검증하였다. 특히, 의도와 행동 간의 관계에서 극복계획과 실행계획의 매개효과를 검증하기 매개 분석을 실시하였다. 그 결과, 신체활동 의도는 실행계획과 운동행동에 직접적으로 영향을 미쳤으며, 실행계획은 의도에 비해 실제 운동행동을 더욱더 잘 예측하는 것으로 나타났다. 따라서 매개변인인 극복계획과 실행계획은 신체활동에 대한 참여 의도가 실제 운동행동에 미치는 영향에서 부분적으로 모두 매개역할을 하는 것으로 나타났다. 이 연구를 통해 나타난 결과를 종합해 보면, 극복계획과 실행계획의 개념화와 모형검증은 의도-행동의 틈을 극복하고 실제 현장에서 실용적으로 활용될 수 있다는 사실을 알 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.256-261
• /
• 2014

Endurance test procedures of multipurpose tactical vehicle is constructed by comparing the Korea defence standard and TOP-2-2-506. The plan was to make the best reflect the operational environment and the actual production purposes. Endurance test of multipurpose tactical vehicle more stringent than the existing other military vehicles validation procedures. But the test plan, it is possible to reduce the cost and schedule of long verification that occurs because of the Endurance test. Through a comparison of the dynamic characteristic analysis, change of test center was to ensure the reliability and validity.

• Communications for Statistical Applications and Methods
• /
• 제5권1호
• /
• pp.107-120
• /
• 1998

This research aims here to develop a certain extended double sampling plan, EDS, which is an extension of ordinary double sampling plan in the sense that the second-stage sampling effort and second-stage critical value are allowed to depend on the point at which the first-stage continuation region is traversed. For purpose of comparison, single sampling plan, optimal ordinary double sampling plan(ODS) and sequential probability ratio test are considered with the same overall error rates, respectively. It is observed that the EDS idea allows less sampling effort than the optimal ODS.

• 대한산업공학회지
• /
• 제33권1호
• /
• pp.76-85
• /
• 2007

A reliability acceptance sampling plan (RASP) consists of a set of life test procedures and rules for eitheraccepting or rejecting a collection of items based on the sampled lifetime data. Most of the existing RASPs areconcerned with the case where test items are available at the same time. However, as in the early stage ofproduct development, it may be difficult to secure test items at the same time. In such a case, it is inevitable toconduct a life test using sequentially supplied samples.In this paper, it is assumed that test items are sequentially supplied, the lifetimes of test items follow anexponential disthbution, failures are monitored continuously, arrival times of test items are known, and thenumber of test items at each arrival time is given. Under these assumptions, RASPs are developed by deter-mining the test completion time and the critical value for the maximum likelihood estimator of the mean lifetimesuch that the producer and consumer risks are satisfied. Then, the developed plans are compared to thetraditional Type-I censored RASPs in terms of the test completion time. Computational results indicate that thetest completion time of the developed RASP is shorter than that of the traditional Type-I censored plan in mostcases considered. It is also found that the superiority of the developed RASP becomes more prominent as theinter-arrival times of test items increase and/or the total number of test items gets larger.

• Journal of Information Technology Applications and Management
• /
• 제27권6호
• /
• pp.101-116
• /
• 2020

This study attempts to derive critical success factors and prioritize activities for implementing the automation of software test. Software testing proceeds in five steps of test plan, test case design, test scripting & test environment setup, test execution & evaluation, and test closure. From the literature, twenty influence factors in the five steps were identified. Focus Group Interviews with ten experts in software testing selected fourteen factors on the basis of importance and feasibility. Some factors were further divided to clarify their meanings and the number of influence factors finally became twenty one. A survey on the influence factors was conducted with 75 IT professionals. An importance-feasibility analysis was applied to the survey responses and classified the influence factors into four groups of essential factors, critical factors, low priority factors, and minimal factors. Essential factors include objectives for test automation, strategies for test automation, test automation training, test automation education, setting up test automation environment, setting up test environment, test automation tool selection. Critical factors include management's continued support, management's continued interest, role of automation engineers, and skills of automation engineers. This result suggests that a lot of efforts should be put into SW test plan for the successful SW test automation and SW automation should proceed in consideration with the priorities and resource consumption.

• Wind and Structures
• /
• 제26권2호
• /
• pp.99-114
• /
• 2018

Due to shortage of land and architectural aesthetics, sometimes the buildings are constructed as unconventional in plan. The wind force acts differently according to the plan shape of the building. So, it is of utter importance to study wind force or, more specifically wind pressure on an unconventional plan shaped tall building. To address this issue, this paper demonstrates a comprehensive study on mean pressure coefficient of 'E' plan shaped tall building. This study has been carried out experimentally and numerically by wind tunnel test and computational fluid dynamics (CFD) simulation respectively. Mean wind pressures on all the faces of the building are predicted using wind tunnel test and CFD simulation varying wind incidence angles from $0^{\circ}$ to $180^{\circ}$ at an interval of $30^{\circ}$. The accuracy of the numerically predicted results are measured by comparing results predicted by CFD with experimental results and it seems to have a good agreement with wind tunnel results. Besides wind pressures, wind flow patterns are also obtained by CFD for all the wind incidence angles. These flow patterns predict the behavior of pressure variation on the different faces of the building. For better comparison of the results, pressure contours on all the faces are also predicted by both the methods. Finally, polynomial expressions as the sine and cosine function of wind angle are proposed for obtaining mean wind pressure coefficient on all the faces using Fourier series expansion. The accuracy of the fitted expansions are measured by sum square error, $R^2$ value and root mean square error.