• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.14 no.2
• /
• pp.157-165
• /
• 2007

Purpose: The purpose of this study was to investigate the plan to introduce a practical skills test as part of the national examination for nursing licensure. Method: The delphi method was used. The first set of data was collected by open questionnaire from universities and hospitals nationally. The second and third were collected by structured questionnaire. Results: The biggest problem for clinical Practice in nursing education was reported as the lack of opportunities for direct nursing practice. The biggest performance problem in job duties for novice nurses was reported as the lack of integrated problem solving skills in a clinical situation. The biggest problem with the current national examination was reported as the use memorizing solutions to test questions. It was suggested that the best plan to resolve problems with the national examination would be to develop test questions representative of the clinical setting and increase personnel in clinical education. About the introduction of a practical skills test as part of the national examination, 56.9% were in agreement and 38.5% disagreed. Conclusion: The current national examination has many problems when it comes to testing clinical competency. So, a practical skills test must be deferred to a future time. There are also many difficulties in presenting a real situation, therefore further research is needed in preparation for the introduction of a practical skills test.

• The KIPS Transactions:PartD
• /
• v.14D no.1 s.111
• /
• pp.57-66
• /
• 2007

Organizations of Software development are very important issue on enhancement of a software quality as rapid progress of software industry. Especially there are diverse attempts for enhancement of test maturity of the software organization through some kinds of the test maturity model. But the current test maturity models based on CMM(Capability Maturity Model) lack part of actual testing measurement and only measure level of test maturity. To solve these problems, we suggest 'double V-model' to execute both software development process and test process simultaneously, and also 'test attributes to Maturity Levels Correlation Matrix' for evaluating level of test maturity included with definitions of test attribute and level. That is, we enhance TMM(Test Maturity Model) adopted with 'Improvement Suggestion' of TPI(Test Process Improvement) which is easy the evaluation of test maturity of organization and gives the direction of improvement to level up the test maturity for the measured organization. As a result, we will contribute to level up the test maturity of the organization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.248-255
• /
• 2020

The effects of the coating thickness on the thermal durability and thermal stability of thermal barrier coatings (TBCs) with a gradient coating thickness were investigated using a flame thermal fatigue (FTF) test and thermal shock (TS) test. The bond and topcoats were deposited on the Ni-based super-alloy (GTD-111) using an air plasma spray (APS) method with Ni-Cr based MCrAlY feedstock powder and yttria-stabilized zirconia (YSZ), respectively. After the FTF test at 1100 ℃ for 1429 cycles, the bond coat was oxidized partially and the thermally grown oxide (TGO) layer was observed at the interface between the topcoat and bond coat. On the other hand, the interface microstructure of each part in the TBC specimen showed a good condition without cracking or delamination. As a result of the TS test at 1100 ℃, the TBC with gradient coating thickness was initially delaminated at a thin part of the coating layer after 37 cycles, and the TBC was delaminated by more than 50% after 98 cycles. The TBCs of the thin part showed more oxidation of the bond coat with the delamination of topcoat than the thick part. The thick part of the TBC thickness showed good thermal stability and oxidation resistance of the bond coat due to the increased thermal barrier effect.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.723-726
• /
• 1998

Fault dropping is a very important part of test generation process. It is used to reduce test generation time. Test generation systems use fault simulation for the purpose of fault dropping by identifying detectable faults with generated test patterns. Two kinds of delay fault model is used in practice, path delay fault model and gate delay fault model. In this paper we propose an efficient method for gate delay test generation which shares second test vector.

• Journal of Aerospace System Engineering
• /
• v.7 no.3
• /
• pp.39-44
• /
• 2013

On this study, climb performance related airworthiness requirements for small airplane on KAS Part 23 and flight test techniques for climb performance (Sawtooth climb) are introduced. Also, applicable procedures, test conditions and required test parameters of sawtooth climb flight test techniques are reviewed.

• Journal of Yeungnam Medical Science
• /
• v.14 no.2
• /
• pp.415-429
• /
• 1997

The purpose of this study was to examine the reliability and validity of attention deficit disorder evaluation scale-school version(ADDES-SV). Between October 1996 and November 1996, ADDES-SV was administered to 263 elementary school students in the second grade and between Jun 1996 and October 1996, 28 attention deficit hyperactivity disorder patients. In the reliability test, the test-retest reliability coefficient was significantly high and that of inattention was 0.88, that of impulsivity was 0.80, that of hyperactivity was 0.83 and total score was 0.83. In the reliability test by internal consistancy, the Cronbach $\alpha$ coefficient was significantly high and that of inattention was 0.98, that of impulsivity was 0.87, that of hyperactivity was 0.87(p<0.05). The half-sprit reliability coefficient by first-second half method showed high correlation and that of inattention was part 1: 0.96, part 2: 0.96 impulsivity was part 1: 0.95, part 2: 0.93, hyperactivity was part 1: 0.92, part 2: 0.94(p<0.05). Inter-rater reliability by pearson correlation coefficient was significantly high and that of inattention was 0.92, that of impulsivity was 0.87, that of hyperactivity was 0.89 and total score was 0.89. The concurrent validity between ADDES-SV and CAP scale was 0.85 in attention deficit hyperactivity disorder patient group and 0.79 in normal control group(p<0.05). In discriminant validity test between attention deficit hyperactivity disorder patient group and normal control group, the patient group showed higher score(p<0.05). The total discriminant capacity of the patient group in ADDES-SV was 94.6%. In this point of view, ADDES-SV scale showed high reliability and validity in applying to Korean subjects and was proved to be the useful screening test tool for attention deficit hyperactivity disorder research.

• Journal of Korean Association for Spatial Structures
• /
• v.23 no.4
• /
• pp.97-105
• /
• 2023

The membrane structure should maintain the membrane materials in tension for structural stability guaranty. The anchoring part in the membrane structure is an important part. It has the function to introduce tension into membrane materials and function to transmit stress which membrane materials receives to boundary structure such as steel frames. In this paper, it grasps anchoring system of the anchoring part in the membrane structure concerning the fracturing characteristic condition of membrane structure, and the influence which is caused to yield it designates the stress state when breaking the membrane structure which includes the anchoring part and that stress transition mechanism is elucidated as purpose. This paper follows to previous paper, does 1 axial tensile test concerning the bolting part specimen, grasp of fracturing progress of the bolting part and the edge rope and hardness of the rubber, does the appraisal in addition with the difference of bolt tightening torque. As a result, the influence which the bolt anchoring exerts on the fracturing characteristics of the membrane material in the membrane structure anchoring part is examined.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.429-434
• /
• 1994

In this study, an experiment in the field was performed to analyze the variations of rebound ratios of SFRS with silica fume after fabricating the panels and placing the plain concrete of simulting a base rock with thickness 7cm. And the experimental parameters which are the reinforcing methods(steel fiber, wire mesh), steel fiber contents(0.0%, 0.5%, 0.75%, 1.0%), silica fume contents(0.0%, 10.0%), and the three parts(lower, middle, upper part) were chosen. According to the results of the lower part in this test, the larger the fiber contents are in case of steel fiber reinforced shotcrete, the less the rebound ratios are within the range of 20~35%, compared to the wire-mesh reinforced shotcrete with silica fume content of 10%, and these results are true of the middle and upper part, respectively. In addition, the four-stage phenomena of the rebound of SFRS were estimated on the base of a series of the test results.

• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.2
• /
• pp.115-123
• /
• 2000

We propose an extended version of multi-step algorithm of self-calibration of interferometric optical testing instruments. The key idea is to take wavefront measurements with near equal steps in that a slight angular offset is intentionally provided in part rotation. This generalized algorithm adopts least squares technique to determine the true azimuthal positions of part rotation and consequently eliminates calibration errors caused by rotation inaccuracy. In addition, the required numbers of part rotation is greatly reduced when higher order spatial frequency terms are of particular importance.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.256-261
• /
• 2001

Corrosion and tensile properties of zircaloy-4 cladding tube having a laser welding part in elevated temperature are studied to present the criterion of quality evaluation in nuclear reactor and to found the scientific basis of SCC, with laser welding method using by coupling up cladding tube to end cap. In the result of tensile test($400^{\circ}C$), the fracture is not happened in the welding part but base metal and the result of corrosion test($400^{\circ}C$ 1500psi steam), corrosion rate of the molten zone and PMZ is a little higher than the other zone.