• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1405-1405
• /
• 2011

Sudden earthquake is changing national energy stratagem for future energy resource. In case Germany, current nuke power station will be shut down with several decades. Newly constructed build in Japan must have photovoltaic system as a obligations.. As a long-term sustainable energy one, PV should give confidence to customers up to more than 20 years. Today, IEC 61215 and IEC 61646 standards are representative one for ensuring performance and safety of PV module. But it is still needed to develop more realistic test method. For example, if we think about extreme condition like desert and North Pole, the temperature condition describe in test standards can have little effect on life time expectation of PV module. Installation speed of PV system is very high, but establishing test standards are very complex and not easy. So in this paper, I tried to open the long-term test method for PV module to ensure 25 year's old life time. It is just starting point of PV related long-term test methods. The specific and technical explanation will be shown in the following paper in detail.

• 한국언어정보학회지:언어와정보
• /
• 제7권1호
• /
• pp.23-40
• /
• 2003

In this paper, we have proposed Auto-TUS, an automatic transcription module of three union symbols-hyphen, dash and tilde (‘­’, ‘―’, ‘∼’)-using their linguistic contexts. Few previous studies have discussed the problems of ambiguities in transcribing symbols into Korean alphabetic letters. We have classified six different reading formulae of the union symbols, analyzed the left and right contexts of the symbols, and investigated selection rules and distributions between the symbols and their contexts. Based on these linguistic features, 86 stereotyped patterns, 78 rules and 8 heuristics determining the types of reading formulae are suggested for Auto-TUS. This module works modularly in three steps. The pilot test was conducted with three test suites, which contains respectively 418, 987 and 1,014 clusters of words containing a union symbol. Encouraging results of 97.36%, 98.48%, 96.55% accuracy were obtained for three test suites. Our next phases are to develop a guessing routine for unknown contexts of the union symbols by using statistical information; to refine the proper nouns and terminology detecting module; and to apply Auto-TUS on a larger scale.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.381-384
• /
• 2006

PDP벽걸이형 대형 평판 디스플레이로서 최근 시각적 극대화에 도움이 되는 대형화의 가능성과 자연스러운 색감 표현력 등의 장점 때문에 주목받고 있다. 하지만 저계조 표현, 의사 윤곽 문제등의 화질 저하 문제로 우위에 있지 못하고 다른 디스플레이 장치들과 치열한 경쟁을 하고 있어 더욱 많은 화질 연구가 필요하다. 본 논문은 42" PDP의 차질 개선 연구를 위한 Verilog HDL을 이용한 소프트 웨어 테스트-베드 구현과 FPGA를 이용한 자체 제작 보드에서 대해 설명한다.

• 산업경영시스템학회지
• /
• 제30권4호
• /
• pp.133-140
• /
• 2007

This study aims to design and implement a learning evaluation system using .NET which is developed by Microsoft. .NET technology supports higher processing speed than ASP technology. The learning evaluation system is based on the web, consists of administrator module, questioner module and student module. The functions of the system, i.e., providing test questions, performing test, and evaluating result of test are achieving on the web in real time. Even when many users use this system, the system is stable and has a speed response time.

• 전자공학회논문지B
• /
• 제29B권11호
• /
• pp.1-7
• /
• 1992

The conformance test is a methodology which verifies whether the Implementation Under Test (IUT) conforms to its standard specification or not. In this paper, first, the Conformance Test System(CTS) is implemented in prototype including verification test type, black-box test strategy, conformance test class, remote test structure, and IUT which is described by the ISO Estelle among Formal Description Techniques. Second, through this prototype the proposed system is experimented. The prototype is composed of two modules. The first module is the Estelle-to-Pascal preprocessor which converts the Estelle program to the corresponding Pascal program because the experimental IUT was described using the unexecutable code form of Estelle before being tested by the TD(Test Driver). The TD, the second module, is based on the master-slave concept and plays important role is CTS. The TD acts as the master with the IUTd being the slave. The prototype system is implemented using Turbo-C, Turbo-Pascal and Turbo-Assembly.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1304-1307
• /
• 2002

In this paper, we describe the structure and the test results of a Bluetooth baseband module we have developed. The module has a distributed buffer, i.e. FIFO, for data stream. Bus interface of the module is designed on the basis of interface of microprocessor widely used and the external interface is designed to consider chips connected directly. Since the module performs as many hardware efficient tasks as possible, processing load of microprocessor is very small. It can also be controlled either by software or by hardware for flexibility. The fully synthesizable baseband module was fabricated in a $0.25\mu\textrm{m}$ CMOS technology occupying $2.79\times2.8{\textrm{mm}^2}$ area. And an FPGA implementation of this module is tested for file and bit-stream transfers between PCs.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.915-922
• /
• 2008

The gas separation technology using membrane is widely used to refine various gases in many industry fields and recently is being applying in $CO_2$ recovery technology. In the gas and chemical tanker. nitrogen generators for inerting, purging and padding are on board and most of them have membrane modules of hollow fiber type with long life and vibration resisting properties. Because a membrane module is a key component accounting for 50% of total manufacturing cost of nitrogen generator, adequate selection for it is an important problem. In this paper, the flow performance coefficient based on dimension and specification data of membrane module was relatively selected to compare nitrogen generating capacity of module and various performance tests about the selected PARKER ST6010 membrane module were conducted. As a result, the useful coefficient and basic data in selecting a membrane module were achieved.

• 대한기계학회논문집A
• /
• 제31권3호
• /
• pp.395-402
• /
• 2007

This paper considers about the tilt measurement of lens module with multiple lenses. The tilt between lenses in lens module and barrel or between image sensor and barrel can be measured precisely with the proposed algorithm. The magnitude and direction of the tilt vector of lens and image sensor can be measured from the best focal surface. The selecting and setting of image sensor, test chart, image sensor centering to lens module, axis align, focus measure method are also explained to get highly precise tilt results. The proposed algorithm is verified with the lens module inspection system we developed, and the experimental results show that the tilt measure proposed in this paper is robust and precise. With the proposed tilt measurement algorithm, the tilt of an image sensor and any other lens which intermediates light can be measured.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.35-36
• /
• 2008

In this paper, we studied the long term durability estimation for crystalline photovoltaic module while exposing to mechanical stress. Solar cell and PV module have many different kinds of stresses from cell to module fabrication. For this reason, some solar cell shows micro crack that decrease crystallization. In here, we expose artificial mechanical load on surface of PV module. Through this, the periodic external force on PV module might give an negative effect. The further analysis is described in the following paper.

• 음성과학
• /
• 제7권4호
• /
• pp.11-26
• /
• 2000

In this paper, we propose the HMM with the MIN module. Because initial and re-estimated variance vectors are important elements for performance in HMM recognition systems, we propose a method which compensates for the mismatched statistical feature of training and test data. The MIN module function is a differentiable function similar to the sigmoid function. Unlike a continuous density function, it does not include variance vectors of the data set. The proposed hybrid HMM/MIN module is a unified network in which the observation probability in the HMM is replaced by the MIN module neural network. The parameters in the unified network are re-estimated by the gradient descent method for the Maximum Likelihood (ML) criterion. In estimating parameters, the variance vector is not estimated because there is no variance element in the MIN module function. The experiment was performed to compare the performance of the proposed HMM and the conventional HMM. The experiment measured an isolated number for speaker independent recognition.