• Fire Science and Engineering
• /
• v.2 no.3
• /
• pp.3-9
• /
• 1988

This paper is study about establishment with water membrane sprinkler in fire prevention block of special Building. The testing program was directed toward investigating the temperature of fire and adjacent room. The results of fire test indicated that under the test conditions in this study, adjacent room temperature is very low in compare with fire room temperature at operating of water membrane sprinkler. Therefore, if exclusion of smoking can be soluted, substitution of water membrance sprinkler in fire resistance wall of fire prevention block is possible.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.5
• /
• pp.941-948
• /
• 2009

We consider a life testing experiment in which several two component shared parallel system are put on test, and the test is terminated at a specified number of system failures. The bivariate data obtained from such a system level life testing can be classified into three classes: (1) the case of failed two components with known failure times, (2) the case of one censored component and the other failed component of which the failure time might be known or unknown, (3) the case of censored two components. In this thesis, the maximum likelihood estimators of parameters for Block and Basu bivariate exponential distribution under above censoring scheme are obtained. And the results of comparative studies are presented.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.6
• /
• pp.617-623
• /
• 2015

In this study, determination methods of monitoring location in water distribution system were suggested and applied to real test bed. Small block of Gwangtan water distribution system is consisted of 582 pipes, 564 junctions, 1 reservoir, and 1 pump station. Small block of Ho Chi Minh water distribution system is consisted of 162 pipes, 148 junctions, and 1 reservoir. Two small block water distribution systems were analyzed by pressure contribution analysis method to determine the optimum monitoring locations. The pressure change was estimated at each junctions by the additional demand at a junction. From the results, the optimum monitoring location can be determined by rank of pressure contribution index at each junctions due to demand change at a junction.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.6
• /
• pp.1401-1408
• /
• 2013

Kim and Kim (1992) proposed typical nonparametric method for umbrella alternative in randomized block design with replications. In this paper, We consider a test procedure for umbrella alternatives in a randomized block design using extension of the two sample placement tests described in Orban and Wolfe (1982) and treatment tests described in Kim (1999). We perform a Monte Carlo study to compare the empirical powers of the test statistics for underlying distributions.

• The Korean Journal of Pain
• /
• v.9 no.1
• /
• pp.232-234
• /
• 1996

For surgical Treatment of spastic deformities of the foot, selective peripheral neurotomies were introduced. These neurotomies utilize microsurgical techniques and intraoperative electrical stimulation for better identification of the function of the fascicles constituting the nerve. Selectivity is required to supress the excess of spasticity without excessive weakening of motor strength and without producing exaggerated amyotrophy. To achieve this goal, minimum one fourth of the motor fibers must be preserved. Neurotomies may be indicated when spasticity is localized to muscle or muscle groups supplied by a single or a few peripheral nerves that are easily accessible. To help the surgeon decide if neurotomy is appropriate, temporary local anesthetic block of the nerve with bupivacaine can be useful. Such a test can determine if articular limitations result from spasticity, musculotendinous contractures, or articular ankyloses because only spasticity is decreased by the test. In additon, these tests give the patient a chance to appreciate what to expect from the operation.

• The KSFM Journal of Fluid Machinery
• /
• v.1 no.1 s.1
• /
• pp.72-80
• /
• 1998

Computational analysis of incompressible flows by numerically solving Navier-Stokes equations using multi-block finite volume method is conducted on a parallel computing system. Numerical algorithms adopted in this study $include^{(1)}$ QUICK upwinding scheme for convective $terms,^{(2)}$ central differencing for other terms $and^{(3)}$ the second-order Euler differencing for time-marching procedure. Structured grids are used on the body-fitted coordinate with multi-block concept which uses overlaid grids on the block-interfacing boundaries. Computational code is parallelized on the MPI environment. Numerical accuracy of the computational method is verified by solving a benchmark test case of the flow inside two-dimensional rectangular cavity. Computation in the axial compressor cascade is conducted by using 4 PE's md, as results, no numerical instabilities are observed and it is expected that the present computational method can be applied to the turbomachinery flow problems without major difficulties.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.379-382
• /
• 2005

Ocher block has started to be studied recently as a new environment friendly alternative building material. This article investigates the use of Rice Husk Ask (RHA) as an additive to improve properties of the ocher block. Ocher mixtures incorporating various proportions of RHA were compared. Compressive strength at various ages of these ocher blocks was evaluated ad the resistance to wet environment was also examined. These test result help to determine the effect of RHA on such properties of the ocher block as compaction, mix proportion, compressive strength and water absorption indexes. Based on these results, the new alternative building material and low cost construction techniques might be developed through more intensive research efforts.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.193-197
• /
• 2008

This study enforced to produce the planting concrete block which could be applied to various slopes economically. First of all, the physical properties was investigated with the various types of aggregate and aggregate ratio of the paste for the lead to mixture proportion of the planting concrete. As a result, the orchid stone as aggregate and 30% of aggregate ratio of the paste were used as the basic mixture proportion considering 20~30% of maintained void ratio for the growth of plant, over 20% of capillary suction for holding water, and 3MPa as the minimum strength. For the result of the test to the new planting block which was quite different from existing planting concrete block, it could complement the problems and be possible to produce effectively and economically because various slopes like 40ﾟ~75ﾟ, continual produce by extrusion, and pumping out were possible were possible.

• Information and Communications Magazine
• /
• v.19 no.9
• /
• pp.77-85
• /
• 2002

In this paper, we introduce an ADSRC(hdvanced DSRC) OFDM packet communication system which has been developed by ETRI. The ADSRC system is targeted to provide high terminal mobility, high data rate and seamless service in roadside environment for mobile office services. We discuss the requirements of the ADSRC communication system for mobile office services, and the system design specification to meet them with regard to air interface. The ADSRC packet communication systems consist of the MAC processor block, the OFDM packet modem block and the RF block. The MAC processor block handles medium access control and the test. The OFDM packet modem transmits data packets at up to 24Mbps adaptively and recovers the data from RF block. We describe the ADSRC packet communication system architecture and the ADSRC system protocol.

• Journal of the Korean Society for Railway
• /
• v.9 no.5 s.36
• /
• pp.612-617
• /
• 2006

As the on-board electric devices determine the performances of vehicles, production of reliable devices is important. To keep the reliability of devices constant, management of performance evaluation of the on-board devices is crucial. Because temperature has a serious effect on failures of the components of the devices, its measurement is the first step for good management. In this study, we described performance characteristics of domestic auxiliary block developed through G7 project. We measured the performances of auxiliary block during test running by the developed on-line measurement system. After we save the input real-time data from each signal of Korean High Speed Train through the network line, we can acquire necessary information through post-processing program. We verify the motor block characteristics of Korean High Speed Train by this system.