• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.439-446
• /
• 1999

In situ experimental studies were Performed at Yongjong Island Geotechnical Experimental Site to evaluate the ground densification on sand deposited. Standard penetration test, cone penetration test, and SASW test were performed and soil profiles and quality of ground improvements were evaluated. The feasibility of applying SASW method were verified by comparing test results. The evaluation technique of in-situ density using SASW and resonant column tests was proposed, and the reliability of proposed method was verified by performing case studies.

• 한국추진공학회지
• /
• 제22권4호
• /
• pp.18-23
• /
• 2018

나로우주센터에 구축/개발된 3단 엔진 연소시험설비에서 다단연소사이클 액체 로켓엔진의 시험을 수행하였다. 수류시험과 점화시험, 연소시험이 이루어졌으며 예연소기의 연소압력 제어를 위한 TTR의 개도를 $143^{\circ}$에서 $185^{\circ}$까지 변화시키며 시험을 수행하였다. 시험 결과 엔진의 주요성능과 TTR 개도에 의한 수력학적 변화를 확인하였지만 연소압력의 제어성 확인을 위한 결과는 얻지 못하였다. 향후 본 논문의 연구에서 도출된 개선점을 보완한 예연소기 압력제어 연구가 이루어질 것이다.

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.2033-2042
• /
• 1993

In conventional SCC susceptibility test, there are constant strain test, constant load test, slow strain rate test(SSRT) and K$_{ISCC}$ test. Among them, the SSRT method is much more aggressive in producing SCC than the other tests, so that the test time of it is considerably reduced. But this SSRT method has mostly been worked using the uniaxial tensile specimen untill now. Therefore, the SSRT method using the tensile specimen(Ten-SSRT) has much difficulty in SCC susceptibility evaluation of a localized region like weldment and the advantage material of high order. Recentely, the small punch(SP) test method using miniaturized small specimen is the very effective test method for fracture strength evaluation of a localized region like weldment and fusion reactor wall irradiated in the nuclear power plant. This paper investigated the possibility of SCC susceptibility evaluation by the SP-SSRT method using the miniaturized small specimen. Therefore, we obtained the result that the SP-SSRT had the possibility for the evaluations of SCC susceptibility for shorter time to corrosive environment compare to Ten-SSRT which was conventional method.

• 한국국방경영분석학회지
• /
• 제31권1호
• /
• pp.93-106
• /
• 2005

The complexity of modern weapon systems using the IT(intelligence technology) demands that rapid and effective transition from force requirements to deployment and fielding. Thus this paper deals with the DT&E(developmental test & evaluation), OT&E(operational test & evaluation) and SBT(simulation based test) procedure using the case study in the test & evaluation of weapon systems. This study is aimed to produce the effective test & evaluation method of weapon systems in the change of acquisition environment.

• 한국추진공학회지
• /
• 제20권3호
• /
• pp.96-102
• /
• 2016

7톤 엔진 시험 전에 엔진 시동/정격구동/종료 특성을 확인하고자 나로우주센터 터보펌프 실매질 시험설비에서 파워팩 시험을 수행하였다. 가스발생기 연소실의 동압은 0.2 bar이하로 측정되어 연소 불안정을 발생하지 않았고, 터보펌프에 장착된 RPM 및 가속도 센서 신호 분석 결과, 예측 RPM 범위 안에서 파워팩 시험이 안정하게 수행되었다는 것을 확인하였다.

• 약학회지
• /
• 제57권3호
• /
• pp.205-212
• /
• 2013

Dissolution test has been performed to control drug quality and to predict in vivo drug release profile of solid dosage forms, so there's a drift towards setting dissolution test instead of disintegration test. However, some solid dosage forms in Korea Pharmaceutical Codex (KPC) are not established the dissolution test yet, so these monographs are necessary to set the specification of dissolution test. In this study, we developed the specification and test method of dissolution test for itopride hydrochloride tablets and tiropramide hydrochloride tablets which are not established the dissolution test yet. According to the "Manual for Guideline Application for Validation of Analytical Procedures" and "Guidelines on Specification of Dissolution test for Oral dosage form" of Korean Pharmacopoeia (KP), we validated and established each development method. Based on the preliminary dissolution profile, we set the dissolution condition(paddle apparatus, pH 1.2 media, 50 rpm). For this condition, we performed the main dissolution test to determine the specification (45 min, 85%). Finally, we validated each analytical method by specificity, linearity, accuracy and precision. These developed methods will be included the next supplement of KPC and also contributed to the quality control of medicines.

• 한국산학기술학회논문지
• /
• 제18권7호
• /
• pp.275-283
• /
• 2017

본 연구의 목적은 문제중심학습에서 교수, 동료, 자기평가간의 평가점수와 평가주체별 관대화와 중심화의 경향을 알아보고 평가주체별 점수와 지필시험 점수간의 관련성을 알아보기 위함이다. 이를 위해 문제중심학습으로 수업받는 간호학과 학생 중 연구에 동의한 105명을 대상으로 하였다. 교수, 동료, 자기평가는 문제중심학습 효과 도구를 가지고 실시하였고 지필시험은 문제중심학습 수업이 종료된 후 실시하였다. 수집된 자료는 SPSS WIN으로 분석하였다. 연구결과 동료평가, 자기평가, 교수평가 점수 순으로, 학생평가 점수가 교수평가 점수보다 높았다. 관대화와 중심화의 경향에서도 동료평가, 자기평가가 교수평가보다 높고 강하게 나타났다. 평가주체별 점수와 지필시험 점수간의 관계는 교수평가 점수와 지필시험 점수간에 유의한 상관이 있었으나 동료평가나 자기평가 점수는 유의한 상관이 없었다. 평가는 교육목표와 밀접한 관련을 갖기 때문에 문제중심학습이 본래의 목적을 제대로 실현하기 위해서는 문제중심학습의 목적에 맞는 평가방법이 반드시 필요하다. 이를 위해서 다양한 평가방법의 개발과 적용을 위한 논의가 필요하며 문제중심학습 평가와 관련된 실제적인 연구가 필요하다.

• 한국의류산업학회지
• /
• 제18권1호
• /
• pp.80-90
• /
• 2016

This study presents quantitative evaluation standards for they mobility test, conducted in the process of a slacks fit test. This study quantified the subjects' evaluation on the wearability of slacks to provide objective qualitative evaluation methods for existing mobility tests. The subjects were women of standard bodytype between the ages of 18 and 24 wearing slacks designed to test their mobility based on differences in ease in waist girth, hip girth, crotch length and knee length. A qualitative evaluation tested the wearability of slacks. Clothing pressure and gap area between the body and slacks were measured based on a quantitative evaluation. The clothing pressure and the gap area between the body and slacks (which reflect the results of the wearability test) were presented in this study as quantitative evaluation standards. Clothing pressure tended to increase as the ease of slacks decreased; however, clothing pressure standards, that induce discomfort, differed by body parts. The hip, crotch, and knee area were relatively less sensitive despite the waist and the abdominal area sensitivity to clothing pressure. This study suggests the minimum ease for the appropriate wearing comfort of slacks by region and motion as standards for the quantitative evaluation of mobility tests. These was reset in accordance to the limits of clothing pressure when the minimum ease was considered as wearable but exceeded the clothing pressure limits.

• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.90-98
• /
• 2016

Currently government certified test method for an automobile remanufactured products is insufficient. Thus many automotive parts in the remanufacturing market are lacking proper evaluation criteria and production of defective products are causing customer dissatisfaction. In this paper a power steering oil pump, which requires stringent manufacturing standards, is studied by the failure mode and effect analysis approach. The research suggested that the test criteria such as discharge flow characteristic test, tightness test, pulley run-out test, pressure switch operation test, low temperature test and rotation pressure durability test should be performed to evaluate the reliability of remanufactured power steering oil pumps. As a result of tests, the performance of remanufactured power steering oil pump satisfied the evaluation criteria of pressure switch operation test and low temperature test. However, the remanufactured power steering oil pump failed to satisfy the evaluation criteria on discharge performance test, tightness test and pulley run-out test. These performance evaluation tests proved the necessity of standard process for the remanufactured power steering oil pump.

• 시스템엔지니어링학술지
• /
• 제14권2호
• /
• pp.1-7
• /
• 2018

The research and development stage can improve the goal level of the project through systematic operation and management of systems engineering. The test evaluation tasks in the R&D process have a lot of connections with the system engineering in terms of requirement management, and the methodology for deriving the requirements when establishing the test evaluation items has been consistently required. In this paper, we propose the process of effectively establishing and using QFD (Quality Function Deployment), a tool to manage customer requirement, and drawing up HOQ (House of Quality) in the search and exploratory development stage of the self - propelled mortar project.