• 한국실내디자인학회논문집
• /
• 제25권1호
• /
• pp.73-80
• /
• 2016

Street is the most fundamental component of city and place to promote diverse actions of people. Pedestrians gaze at various street environments. A visual gaze means that there are interesting elements and these elements need to be preferentially improved in the street environment improvement project. Therefore, this study aims to set up the priorities of street environment components by analyzing eye movements from a pedestrian perspective. In this study, street environment components were classified into road, street facility, building(facade) and sky and as street environment images, three "Streets of Youth" situated in Gwangbok-ro, Seomyeon and Busan University of Busan were selected. The experiment targeted 30 males and females in their twenties to forties. After setting the angle of sight through a calibration test, an eye-tracking experiment regarding the three images was conducted. Lastly, the subjects were asked to fill in questionnaires. The following three conclusions were obtained from the results of the eye-tracking experiment and the survey. First, building was the top priority of street environment components and it was followed by street facility, road and sky. Second, as components to be regarded as important, fast 'Sequence', many 'Fixation Counts' and 'Visit Counts', short 'Time to First Fixation' and long 'Fixation Duration' and 'Visit Duration' were preferred. Third, after voluntary eye movements, the subjects recognized the objects with the highest gaze frequency and the lowest gaze frequency.

• 한국실내디자인학회논문집
• /
• 제22권1호
• /
• pp.3-10
• /
• 2013

This study, with a space of cafeteria for the object, selected adjective and space for space evaluation based on existing dissertations and experts' survey so as to analyze the perception features by adjective into perception types. At space evaluation, the purpose of visiting the cafeteria was setup for test. Analysis of what perceptual information on the space was acquired enables to set up any features at a space and the direction of designing. The approach through the evaluation of space perception assigning this kind of observing intentionality can be applied to emotion technique which connects a designer to customers. From this study, the following conclusion has been reached. Frist, the difference at perception type by gender is formality, which is higher with women than men. When it is considered that other types are identical, it can be seen that the formality is the perception type to decide the selection of gender and has the highest average value among all the three types. On the whole, men have the tendency for regarding spaciality as the most important, while women have that for looking upon formality as such. Second, to the question what element they would see first when visiting for conversation, men and women answered respectively that they would see partition (35.6%) and chairs (38.0%). Men had a very strong propensity for the element of area section(partition) supporting the activity of purpose and women regarded the element of behavior support(chair) carrying out the activity of purpose as important. Third, the analysis of deviance shown at the formality of perception type showed that men had dispersive selection at the process of selecting all adjectives and their features at the process of space perception were higher than spaciality and fancine.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.199-206
• /
• 2006

Automatic grease lubricator is equipment that provides adequate amount of fresh grease constantly to the shaft and the bearings of machines. It minimizes the friction heat and reduces the friction loss of machines to the least. This research is to develop automatic grease lubricator by gear driven mechanism with controlled operation time. The ultimate design of this equipment is to lubricate an adequate amount of grease by a simple switch clicking according to the advanced set cycle. The backlash of the gear was minimized to increase the output power. To increase the power of gear mechanism, the binding frequency and the thickness of the coil were changed. To control the rotating cycles of the main shaft according to its set numbers, different resistance and chips were used to design the circuit to controls electrical signals with pulse. The body of the lubricator was analyzed by stress analysis with different constructed angle. The stress analysis for differing loading pressures applied to the exterior body of grease lubricator due to the setup angle, was found that the maximum stress was distributed over the outlet part where the grease lubricator suddenly narrowed contracts. Digital mock-up was analyzed and the rapid prototyping(RP) trial products were tested with PCB circuit and grease. The evaluation of the outlet capacity for RP trial products was conducted, because the friction caused by the outlet on the wall surface was an important factor in the operation of the equipment. Finally, the finishing process was applied to decrease the roughness of the surface to a comparable level and was able to test the performance examination for the product.

• International Journal of Fluid Machinery and Systems
• /
• 제3권1호
• /
• pp.11-19
• /
• 2010

The performance of the crossover system of a centrifugal compressor stage consisting of static components of $180^{\circ}$ U-bend, return channel vanes and exit ducting with a $90^{\circ}$ bend is investigated. This study is confined to the assessment of performance of the crossover system by varying the shape of the return channel vanes. For this purpose two different types of Return Channel Vanes (RCV1 and RCV2) were experimentally investigated. The performance of the crossover system is discussed in terms of total pressure loss coefficient, static pressure recovery coefficient and vane surface pressure distribution. The experimentation was carried out on a test setup in which static swirl vanes were used to simulate the flow at the exit of an actual centrifugal compressor impeller with a design flow coefficient of 0.053. The swirl vanes are connected to a mechanism with which the flow angle at the inlet of U-bend could be altered. The measurements were taken at five different operating conditions varying from 70% to 120% of design flow rate. On an overall assessment RCV1 is found to give better performance in comparison to RCV2 for different U-bend inlet flow angles. The performance of RCV2 was verified using numerical studies with the help of a CFD Code. Three dimensional sector models were used for simulating the flow through the crossover system. The turbulence was predicted with standard k-$\varepsilon$, 2-equation model. The iso-Mach contour plots on different planes and development of secondary flows were visualized through this study.

• 대한기계학회논문집A
• /
• 제39권4호
• /
• pp.415-421
• /
• 2015

본 연구는 햅틱 진동자의 개발과정에 있어 성능인자의 단계별 설정절차와 성능 및 소형화를 위한 자석의 착자방법에 대한 연구를 수행하였다. 착자방법에 대한 연구는 수평착자와 수직착자의 구성방법에 따른 전자기력을 비교분석하여 수행하였으며, 수행결과 수평착자가 우수한 것으로 나타났다. 시스템적 설계 절차로는 제품의 특성으로부터 설계 인자를 설정하는 단계적 절차를 구성하여 시작품을 제작하고 시험을 통하여 검증하였다. 해석적 방법에서는 진동응답 특성 해석과 전기장의 해석을 독립적으로 수행하였으며, 시험결과와의 검증을 통해 잘 일치하는 결과를 도출하였다. 제품신뢰성 확보를 위한 신뢰성 기반 설계인자는 스프링 높이, 용접 위치, 코일의 위치로 선정하였다. 그리고 설계 인자에 따른 전자기장 민감도 및 성능 변화를 분석하였고 이를 바탕으로 신뢰성 기반의 고성능 햅틱 진동자를 구현할 수 있도록 설계방법을 제시하였다.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.173-178
• /
• 2016

콘크리트 교량 상에 고속철도의 자갈 궤도가 시공될 경우 장대 레일의 종방향 변위가 고정된 반면 교량 바닥판 슬래브의 종방향 변위가 고정되지 않고, 온도 하중과 외부 하중에 의해 교량과 레일의 상대 변위가 발생한다. 현재 장대 레일 자갈 궤도에 대한 종방향 저항력(KR C-08080, UIC code 774-3)은 교량의 종방향 변위와 자갈 궤도와 콘크리트 슬래브 사이의 마찰력을 고려하고 있지 않다. 또한 종방향 저항력 값은 다소 보수적이어서 철도교의 장경간 및 연속화에 불리한 요소로 작용하고 있다. 따라서 실제의 거동을 보다 효과적으로 반영하기 위해 장대 레일의 종저항력은 콘크리트 슬래브와 궤도 사이의 추가적인 강성을 고려해야 한다. 본 연구에서는 콘크리트 바닥판과 도상 궤도를 모사한 실대형 실험체(mock-up test specimen)를 제작하여, 교량 상에 설치된 도상 궤도의 종저항력을 측정하였고, 또한 차륜 하중의 재하 유무에 대해서도 그 거동을 평가하였다. 실험 결과, 최대 종저항력은 현재의 코드와 유사한 경향을 보였으나, 한계 변위까지의 강성은 현재의 코드보다 실험 결과가 작게 측정되는 것으로 나타났다.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.516-527
• /
• 2013

This paper presents a new overall system for state-of-available-power (SoAP) prediction for a lithium-ion battery pack. The essential part of this method is based on an adaptive network architecture which utilizes both fuzzy model (FIS) and artificial neural network (ANN) into the framework of adaptive neuro-fuzzy inference system (ANFIS). While battery aging proceeds, the system is capable of delivering accurate power prediction not only for room temperature, but also at lower temperatures at which power prediction is most challenging. Due to design property of ANN, the network parameters are adapted on-line to the current battery states (state-of-charge (SoC), state-of-health (SoH), temperature). SoC is required as an input parameter to SoAP module and high accuracy is crucial for a reliable on-line adaptation. Therefore, a reasonable way to determine the battery state variables is proposed applying a combination of several partly different algorithms. Among other SoC boundary estimation methods, robust extended Kalman filter (REKF) for recalibration of amp hour counters was implemented. ANFIS then achieves the SoAP estimation by means of time forward voltage prognosis (TFVP) before a power pulse occurs. The trade-off between computational cost of batch-learning and accuracy during on-line adaptation was optimized resulting in a real-time system with TFVP absolute error less than 1%. The verification was performed on a software-in-the-loop test bench setup using a 53 Ah lithium-ion cell.

• 감성과학
• /
• 제12권1호
• /
• pp.45-54
• /
• 2009

인간은 주변 환경 속에서 경험하는 다양한 사물이나 대상을 유사관계를 기준으로 범주화하고 평가하는 인지적인 활동을 하고 있다. 이것은 인간을 둘러싼 모든 환경적 요소를 자신에게 의미있는 개념 단위로 이해하기 위한 필수적인 수단이라고 할 수 있다. 일반적으로 SD법(Semantic Differential Method)으로 대표되는 종래의 감성평가방법에서는 계측대상을 '집단적인' 경향으로 간주하여 독립적으로 평가판단을 하도록 요구하여 왔다. 그러나 이와 같은 SD법만으로는 인간의 유연한 유사성 판단능력을 평가에 반영하기에는 불충분하다. 이에 본 논문에서는 자극의 직감적 범주화와 각 범주 내에서의 대표-비대표사례의 유사성 판단을 기초로 한 계층적인 감성평가방법을 제안하였다. 제안한 평가방법의 유효성 검증을 위하여 감성적 소구력이 높은 장신구의 스캔화상을 실험자극으로 선정하여 감성평가실험을 실시하였다. 실험결과 직감적 범주화 작업, 대표사례의 선출, 대표사례의 평가득점을 비대표사례의 초기값으로 설정한 계층적인 감성평가방법은 종래의 SD법을보완할 수 있는 감성평가방법으로서의 근거가 마련되었다.

• Journal of Korea Trade
• /
• 제23권8호
• /
• pp.45-72
• /
• 2019

Purpose - This study examines the mediating effect of switching costs (economic risk costs and setup costs) on the relationships of country image with product attitude and product attachment. Switching-cost effects for the Korean Wave, which are insufficiently addressed in the literature, were investigated using the country image of Korea as a proxy for the Korean Wave. Moreover, this study examined the economic effects of the Korean Wave and the negative effect of the Terminal High Altitude Area Defense (THAAD) deployment on these economic effects. Design/methodology - A total of 302 Chinese consumers were surveyed using a questionnaire. Because this was an exploratory study and was not based on a classical model, the PLS-SEM method was employed to test the stability of the model and its hypotheses. Findings - Switching costs had mediating effects on the relationships of country image with product attitude and product attachment. The switching-cost effects for the Korean Wave were verified. However, neither the economic image nor cultural image of Korea had significant effects on the economic risk costs. Moreover, the economic image of Korea had no significant effect on the set-up costs. Originality/value - This study broadened the understanding of the relationships among country image, switching costs, product attitude, and product attachment and advanced the knowledge of relevant theories. The results contribute theoretically to the literature on switching-cost effects for the Korean Wave. The results confirmed the negative effect of THAAD deployment on the economic effects of the Korean Wave. In the rapidly developing international environment, these research results could serve as theoretical reference guidelines for suppliers when developing marketing strategies.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.7-15
• /
• 2018

We propose a method for evaluating sound quality quantitatively to develop high-level home appliances (HA). Generally, a refrigerator has diverse movable parts such as slider, drawer, and folding shelf. Therefore, an engineering treatment to control the noise quality is considered as one of key technologies for a higher level refrigerator. Among the movable parts, we have selected a folding shelf as an example, which is commonly setup inside of a home refrigerator for increasing space convenience, to control the noise quality. However, it is known that its noise level is very high comparing to other movable parts when folding or unfolding actions. In order to evaluate and compare the noise quality, we have tested different eighteen models, and have suggested an impact sound quality index (ISQI) based on subjective evaluation data obtained experimentally by thirty two evaluators. The ISQI was formulated using three sound quality elements (noise peak, raising time, impact duration) to determine psycho-acoustic properties. Through this work, we developed an evaluating process and ISQI that was verified the usefulness by comparing the test results of personal perceptions given by evaluators with the prediction value of ISQI. We showed a good relations between them, so we believe that the proposed method and ISQI can be utilized to control of the noise quality of HA effectively.