• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.2
• /
• pp.31-38
• /
• 2018

The pilot aptitude test so far has been conducted with a dichotomous concept of cognitive factor and non-cognitive factor, so it was not easy to explain concrete factors about pilot aptitude. Therefore, an integrated approach is needed to construct pilot aptitude test including all factors that can predict pilot aptitude. In previous study, we developed questionnaire items for the Pilot Aptitude Personality Test(PAPT) which can predict the flight training achievement through personality and personal characteristics. And those items were categorized as personality, cognition, and motivation factors. The flight training grades were correlated with all the test factors of the items, and the cognitive factors were high. As a result of the regression analysis, the total score of the three factors together accounted for 16% of the flight training grades. The results of the ANOVA showed that the cognition factors and motivation factors had significant effects on the completion of the flight training. The factors of PAPT predicted not only the completion of the flight training but also the flight performance. This is because the existing paper-pencil pilot aptitude test can only discriminate the flight training completion status. This is also a result of the fact that the introductory flight training consists of various factors including not only basic cognition but also personality and motivation.

• Journal of the Korean Society of Safety
• /
• v.25 no.3
• /
• pp.78-82
• /
• 2010

This study is to test insulation mortar mixed with wastepaper and sawdust to find out its insulation performance. Therefore, wastepaper and sawdust have been added to normal mortar. They are analyzed for the above purpose using compressive strength and insulation performance. It is found that the more wastepaper and sawdust will be mixed, the lower heat conductivity will be taken. Wastepaper and sawdust mixture will be more 2.0% then the insulation mortar quality can be compatible with the 3rd kind of the standard. Optimal mixture for insulation will be wast paper:sawdust=4:6. Cohesive test of materials showed that test material has stronger than stand are $0.10N/mm^2$. It is satisfactory the test result showed a range of $0.12{\sim}0.15N/mm^2$ from the test result. Optimal mixture of wastepaper and sawdust have been found out from the study comprehensively, exclusive of the proportion of wastepaper:sawdust = 8:2. It is thought that standard of length deformation; 0.5% is reasonable. This means that deformation of mortar itself can be considered. But it is also Shown that water mixture has also been sharply changed at first flow test. Therefore, it is thought that absorbed water content in the material gave considerable effect to variation rate.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.654-657
• /
• 2011

For the successful development of korean exploraton program, KARI started development of ground test model for lunar lander from last year. In order to secure core technology for space propulsion system, Koreanization of propellant tank is proceeding and it will be used for final assembly and test for ground test model. In this paper, the development result of titanum tank shell and verification test result was presented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.7
• /
• pp.49-54
• /
• 2011

Now the world will regulate the CO2 emission due to environmental issues. For an alternative plan photovoltaic system is watched. So, photovoltaic system is trend of big city and it is mandatory for renovation of construction. Oil & gas filling station existed in city is suitable to found the photovoltaic system. But the general photovoltaic system in oil & gas filling station is difficult to found because it is classified into hazardous area. This paper evaluates intrinsic safety evaluation of solar cell for making basic data to found for the photovoltaic system on hazardous area. The intrinsic safety characteristic is evaluated by short-circuit ignition test using IEC type spark ignition test apparatus and temperature rising test. The result of short-circuit ignition test, propane-air mixture gas is exploded on condition that 4 solar cells(9[V], 90[mA]) are connected serially under insolation 800[W/$m^2$]. So, if a larger solar module will be used at oil & gas filling station than we were tested, it needs explosion proof. As the result of rising temperature test, the temperature rising due to short circuit is not so much, but when the temperature rises due to radiant heat, it demands careful consideration for environmental influence.

• Journal of Korean Elementary Science Education
• /
• v.32 no.2
• /
• pp.185-197
• /
• 2013

The purpose of this study was to analyze the difference between eye movements according to science achievement of elementary school students in observation situation. Science achievement was based on the results of national achievement test conducted in 2012, a random sampling of classes. As an assessment tool to check observation test, two observation measure problems from TSPS (Test of Science Process Skill; developed in 1994) suitable for eye tracking system are adopted. The subjects of this study were twenty students of sixth grade who agreed to participate in the research. SMI (SensoMotoric Instruments)' iView $X^{TM}$ RED was used to collect eye movement data and Experiment 3.1 and BeGaze 3.1 program were used to plan and analyze experiment. As a result, eye movements in observation test varied greatly in fixation duration, frequency, saccade, saccade velocity and eye blink according to students' science achievement. Based on the result of eye movements analysis, heuristic search eye movement was discussed as an alternative to improve underachievers' science achievement.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.2
• /
• pp.115-123
• /
• 2000

Piezocone Penetration Test has been performed in the soft ground over the site preparation area at Inchon International Airport(IIA). With the pore pressure dissipation test results, the changes in the permeability and the coefficient of consolidation in clayey soil were checked and the differences of the undrained shear stength verified the soft ground improvement effect from vane test and piezocone test both before and after the improvement. From the results, thin sand seam was found and this caused a big difference in the coefficient of permeability and consolidation. The coefficient of consolidation was high in the upper marine deposit and relatively low in lower marine deposit. It was found that the reduction of void ratio by preloading resulted in the reduction of coefficient of consolidation after the ground improvement. In addition, there were some variations of undrained shear strength when the number of 15 or 18 was used as the coefficient of piezocone(Nkt). However, when the average value of undrained shear strength calculated using Nkt=10 was applied, the result indicated the similar average value with the result of vane test and the increasing rate of strength( Δsu/Δ$\sigma$≒0.38) also showed the similar distribution.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.5 no.1
• /
• pp.6-12
• /
• 2008

ISO pneumatic cylinder reliability test requires air leakage measurement. Air cylinder has many parts and the leakage shall be measured before, during and after endurance test, and, the leakage should smaller than the specified value. The existing measurement method needs complex operation and the calibration of leak detector, and, has to separate the testing cylinder from endurance test device, which causes the change of contact condition of seal in the cylinder. Therefore, it is hard to evaluate the air leakage during endurance test, and guarantee the reliability of the conventional measurement method. In this paper, a new method for air leakage measurement using isothermal chamber, which does not requires calibration or temperature compensation, and, can measure air leakage accurately with quite simple operations, is proposed. As a result, reliability of air leakage measurement can be improved because the proposed method does not have to separate the testing cylinder from the endurance test device for air leakage measurement. The effectiveness of the proposed method is proved by error analysis of leak measurement from experimental result.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.6
• /
• pp.653-659
• /
• 2015

The aim of this study is to develop a technique for the accelerated life test of the capacitor in a propulsion control device of a traction inverter used for a high-speed train. Using this technique, the accelerated life test can possibly estimate the life cycle of a capacitor under various temperature conditions and irregularly applied voltage. The accelerated life test is conducted for the capacitor of the traction inverter. The common proceedings of this test are selection of failure mechanism, determination of accelerated stress, range determination of the accelerated stress, determination of the test condition, and distribution and determination of the sample. From this result, the continuous applied voltage was not considered for the acceleration factors anymore. Therefore, the final result having an acceleration factor of 9.4 (= 13,626/1,445) was observed. Furthermore, the life-shortening acceleration effect for the irregular applied voltage condition can be applied to various situations.

• YAKHAK HOEJI
• /
• v.38 no.5
• /
• pp.562-567
• /
• 1994

Now para-phenylenediamine(PPDA) is generally used as component of most hairdyes because it can be used more conveniently and effectively than the others. But PPDA become known to cause side effects such as skin sensitization, contact dermatitis and eye irritation. So this study was done to restudy the safety of hairdyes containing PPDA. The results of experiment were as follows. 1. As a result of primary skin irritation test and eye irritation test in white rabbits, the solution containing 5% PPDA(in saline) were classified as weak irritant but four kinds of commercial hairdyes containing PPDA were proved not to have any irritation. 2. As a result of skin sensitization test in guinea pig, four kinds of commercial hairdyes were classified as Calss I(week irritant) but three kinds of commercial hairdyes induced skin sensitization for guinea pig to 5% in test groups. These results indicate that the actual toxicity of commercial hairdyes(four kinds) is negligible. But based on the results of experiment, it is thought that there is possibility of some commercial hairdyes to induce skin sensititization.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.1
• /
• pp.109-116
• /
• 2008

In order to test the adhesive capacity of carbon fiber sheet, a static loading method for bending-behavior-type beam specimens, cut in half was developed and test was conducted with compressive strength of concrete set as the test parameter. The tests were performed to prescribe adhesive shear strength based upon the result of shear failure as well as verification of testing method. First of all, the test method proved to be reliable in determining the adhesive shear strength. The test result also exhibited two types of variations in adhesive shear strength. Among two types of variations, average and minimum values for adhesive shear strength, relatively stable results, 3.41MPa and 2.11MPa, respectively. Particularity in the adhesive shear strength with respect to compressive shear strength was not found.