• 동력기계공학회지
• /
• 제16권3호
• /
• pp.44-50
• /
• 2012

The reliability qualification test is essential in order to ensure the life time of the product under the normal operation conditions when a new product is developed. The reliability qualification test period has an important impact on the development time of new product. Therefore, some researches to reduce the test time of reliability qualification test have been actively studied. Generally, accelerated life test is well known as one method that can save the test time of the reliability qualification test. This test is conducted under the higher stress condition than normal condition. So we need to investigate what factor affects to the higher stress condition. This paper shows the relationship between the acceleration factor and reliability qualification test period. Especially, we focused on the method to obtain effective acceleration factors under the high temperature condition. Through some experiments for a refrigerator's compressor, we were able to confirm how to increase acceleration factors and how to reduce the reliability qualification test period with minimum samples.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권4호
• /
• pp.399-407
• /
• 2011

Reliability evaluation of One-Shot system which flies at speed of Mach must be evaluated as the result of many firing tests. But many firing tests are impossible because of budget deficit. Consequently the reliability prediction which substitutes firing tests is used. The accuracy of reliability prediction is decided according to a quantity of accumulated test data. If the test data is insufficient, the direction of prediction can not be set. So we propose the reliability prediction method which applies MIL-HDBK-217 Plus. MIL-HDBK-217 Plus is described about reliability prediction method without sufficient test data. So we apply MIL-HDBK-217 Plus to the rocket motor system, and we accomplish a modeling and a reliability prediction about the system.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권1호
• /
• pp.37-50
• /
• 2006

The accelerated life tests of the catalytic gas sensor were performed at three different gas concentration conditions. From the test data, the power-Weibull model was estimated and the acceleration factor between test condition 25%LEL(Lowe Explosive Limit) and use condition 5%LEL was about 3 according to this acceleration model. Using this acceleration factor, life test specification for qualifying that B10 lifetime of the catalytic gas sensor meets the goal lifetime (5 years) was designed.

• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.67-74
• /
• 2018

The verification for the design limit margin of the power device for the information communication and surveillance systems using HALT(Highly Accelerated Life Test) reliability test is described. The HALT reliability test performs with a step stress method which change condition until the marginal step in a design and development phase. The HALT test methods are the low temperature(cold) step stress test, the high temperature(hot) step stress test, the thermal shock cyclic stess test, and the high temperature destruct limit(hot DL) step stress test. The power device is checked the operating performance during the test. In this paper, the HALT was performed to find out the design limit margin of the power device.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권1호
• /
• pp.59-70
• /
• 2014

The requirements of reliability verification for new products and technology are increasing more and more in accordance with the trend of climate change prevention and GHG reduction technology, functional skills. SCA(Swirl Control Actuator) is the important part of a car intake manifold system. This device generates swirl that is mixing the fuel and air into the engine combustion chamber. This is to improve output for engine and reduce the emission for exhaust. In this article reliability assessment criteria for swirl control actuator for automobiles are established in terms of basic HALT and life time test.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권4호
• /
• pp.236-242
• /
• 2014

Since permanent magnet coupling transfers power by magnetic force without contact, it has little shock, vibration, noise. In case of overload, it protects a pump or a motor which is relatively important by slipping internally. In this study, failure analysis and test evaluation on the permanent magnet coupling have been proposed and the process that reliability of the product improves through design improvement has been presented. And failure cause of typical failure case has been investigated and improvement plan has been presented. Finally, reliability improvement is established by analysis of the test results of before and after acceleration test.

• 동력기계공학회지
• /
• 제16권6호
• /
• pp.59-65
• /
• 2012

Torque Generator is a product which has function to transform hydraulic energy to mechanical energy of torque and rotating speed, and be used for direction change device of agricultural machines. This study proposes failure analysis and test analysis on torque generator and introduces a process that reliability of a product is enhanced by design improvement. And also it presents improvements of maximum output torque by modifying design and surface treatment. Lastly it verifies reliability improvement by analyzing test results of before and after life test.

• International Journal of Reliability and Applications
• /
• 제10권2호
• /
• pp.109-118
• /
• 2009

Crankshaft, the core element of the engine of a vehicle, transforms the translational motion generated by combustion to rotational motion. Its failure will cause serious damage to the engine so its reliability verification must be performed. In this study, the S-N data of the bending and torsion fatigue limits of a crankshaft are derived. To evaluate the reliability of the crankshaft, reliability verification and analysis are performed. For the purpose of further evaluation, the bending and torsion tests of the original crankshaft are carried out, and failure mode analysis is made. The appropriate number of samples, the applied load, and the test time are computed. On the basis of the test results, Weibull analysis for the shape and scale parameters of the crankshaft is estimated. Likewise, the $B_{10}$ life under 50% of the confidence level and the MTTF are exactly calculated, and the groundwork for improving the reliability of the crankshaft is laid.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권4호
• /
• pp.241-247
• /
• 2015

Purpose : The demand for higher fuel economy vehicles has helped develop fuel-efficient vehicles such as a CVVL called continuous variable valve lift. Existing CVVL has been applying DC type motor to control intake valve, but recently some car parts manufacturers have been developing a BLDC type CVVL motor for improvements of endurance performance. The purpose of this study is to find the potential failure mechanism of the CVVL BLDC moto in early stage of development based on the design properties and design the accelerated life test model. Methods : CVVL BLDC is consist of brushs, coil, magnetic, PCB, bearing and so on. Each component has a latent failure mechanism caused by temperature, humidity, vibration. By analysis result of the failure mechanism, thermal fatigue is the most important factor of a durability of CVVL BLDC motor. So, we designed a new accelerated life test model for guarantee of the CVVL BLDC motor. Results : A crack occurred on via hole in test using the conditions we designed, so we did change the design to avoid this failure. The via hole dimension is changed a little larger, as a result we achieve improvements in reliability of the CVVL BLDC motor. By applying various kinds and extreme level of stresses, we can find the operating limits of products. Conclusion : In thesis, We analyzed the failure mechanism of CVVL BLDC and designed an accelerated life test method to give a guarantee for reliability. Based on the test results, we could improve the reliability of developments by change of design.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.891-894
• /
• 1999

According to increasing the integration of the device, there are important consideration about the improvement of the reliability in the product. To improve the reliability of the device, the test parameters and test time are increased. There are no pin-to-pin short test and pin-to-pin leakage test in the present test items to analysis the characteristics and reliability of the device. The purpose of the paper is to model the pin-to-pin phenomenon and propose to modify the test method present and to test the new pin-to-pin DC parameters. These modified and additive test items are applied to product test and confirmed to improve the reliability of product test.