• 제목/요약/키워드: Test Cost Reduction

검색결과 381건 처리시간 0.034초

일체형 중공재의 중공부 내부형상에 따른 이방향 중공슬래브의 전단성능 평가 (Shear Performance of Board-type Two-way Voided Slab)

  • 최현민;박태원;백인관;김제섭;한주연
    • 콘크리트학회논문집
    • /
    • 제27권6호
    • /
    • pp.651-659
    • /
    • 2015
  • 최근에 사회적 요구와 경제적인 요구로 인해서 장스팬 건축물이 증가하고 있다. 그러나 장스팬 건축물은 자중이 증가하여 처짐 진동 소음의 문제가 있다. 이러한 문제를 해결하기 위하여 판형중공슬래브가 제안되었는데 이는 슬래브 안에 일체형 중공재를 삽입함으로써 자중이 감소된 슬래브를 만들 수 있다. 이 시스템은 휨성능에는 영향을 받지 않는 단면을 중공재로 대체함으로써 슬래브의 강성은 그대로 유지하면서, 소음 및 처짐을 줄이고 자중을 감소할 수 있는 장점이 있다. 그러나 이 시스템의 경우 부력에 의해 일체화된 중공재가 상승한다는 단점이 있다. 따라서 판형 중공재 고정장치를 개발하였고, 또한 이를 삽입한 판형중공재의 성능을 알아보기 위하여 7개의 실험체를 제작하여 그 성능을 알아보고 그 결과 나타난 수평전단파괴에 대해서 예측을 할 수 있는 식을 제안하였다.

인터넷 뱅킹에서 오프라인 신뢰와 온라인 거래의 관계 (The Relationship between Offline Trust and Online Transaction in Internet Banking)

  • 이웅규
    • Asia pacific journal of information systems
    • /
    • 제17권2호
    • /
    • pp.29-47
    • /
    • 2007
  • Owing to the rapid growth of using the Internet, not only click-and-mortar companies but also brick-and-mortar ones have been expanding their distribution channels into online, Moreover, since online channels are more attractive than offline ones in control and maintenance, switching customers into online ones is emerged as one of very important managerial issues in a view of reduction of cost as well as expansion of services. However, the switched customers should be faced by uncertainties which could not have been experienced in offline. Specifically, in online channels, buyers and sellers are separated temporally and spacially and there are always so many kinds of threat for security as well as not enough systems and conventions for them yet. Therefore, trust has been considered as one of the most critical mechanisms for resolution of such uncertainties in online transactions. However, it is not easy to build and maintain the relationships in online since most of them are virtual and indirect generally. Therefore, in order to switch offline customers into online ones, it is very important to make strategies based on identification of the relationship between online transaction and offline trust which has been built in offline business. Generally offline trust, which has been built independent of online, could not include trust for online-dependent activities such as payment security during or after transactions, while most of online trust include it. Therefore, a customer with high offline trust does not always perceive high security and assure safe transactions. Accordingly, while online trust, where technical capabilities for online security is one of main bases, includes control trust implicitly or explicitly, offline trust does not. However. in spite of such clear discrimination and independence between offline trust and perceived security, there can be the significant dependency between these two beliefs. The customers with high offline trust believe that the company would do some activities for online security for customers' safe transactions since it has been believed of doing well for customers' trust. Theoretically, users' perception of security is interpreted as a kind of control trus, which is trust for company's technical control capacities in order to resolve technical uncertainties in online. Therefore, the relationship between two beliefs can be considered as transference from offline trust to another type trust. that is, control trust. The objective of this study is to analyze the effect of offline trust on online transaction uses mediated by perceived security. For this purpose, we suggest a research model based on technology acceptance model (TAM). Reuse intention is adopted as a dependent variable and TAM is modified by adding perceived risk (PR) as well as two beliefs of using Internet banking, perceived usefulness (PU) and perceived ease of use (PEOU). Moreover, perceive security (PS) is adopted as an external variable for PR and PU, while offline trust (OT) is an antecedent of PS. For an empirical test, sampling from 108 visitors to the banks in Daegu, Korea, we analyze our model by partial least square (PLS) approach. In result, our model is shown to explain 51.4% of the variance in reuse intention and all hypothesis are supported statistically. A theoretical implication of this study is to identify a role of PS between offline trust and reuse intention of using online transaction services. According to our result, PS can be considered as a mediation variable for bridging between two different concepts: trust that explains social aspects of customers and companies, and TAM that explains customers' reuse intention.

GMAW 더블 와이어 릴, 원격제어토치 용접기술을 이용한 V형 맞대기 용접 부의 실험적 성능 평가 (Experimental Performance Evaluation on V-shaped Butt Welding Using GMA Welding Double Wire Reel and Remote Control Torch Welding Technique)

  • 김정혁;오석형;이해길
    • 한국산학기술학회논문지
    • /
    • 제16권2호
    • /
    • pp.1339-1347
    • /
    • 2015
  • 본 연구는 현장의 GMAW 용접기에 더블 와이어 릴을 겸비한 원격제어토치의 시스템에 관한 것이다. 산업현장 용접에서는 용접기 본체로부터 와이어 송급장치까지의 거리가 약 30m 떨어져 있고 송급장치로부터 토치까지의 거리는 약 3~5m 정도이다. 이에 따라 차량 및 탱크 내부의 용접에서 제어 패널을 볼 수 없는 곳이나 작업장이 먼 곳 등에서 용접사가 용접을 하면서 용접조건에 맞는 전류와 전압을 조절할 수가 없고 또한 용접와이어가 완전히 소모되면 용접을 중단하고 와이어 릴을 갈아 끼워야하는 번거로운 문제점이 있다. 이 때문에 전류와 전압 조절 및 와이어를 교체하기 위해 용접을 중단하고 잦은 이동으로 용접구조물의 순간적인 냉각에 의해 용접결함이 발생된다. 본 연구에서는 이러한 제반 문제를 감소하기 위해 기존의 GMAW 용접기의 제반기능을 토대로 간소화 및 합리화하여 더블 와이어 릴을 겸비한 원격제어토치를 자체 제작하였다. 실험은 SM50A 용접구조용 압연강재 6mm를 사용하여 와이어 더블 릴을 겸비한 원격제어 토치와 기존 $CO_2$ /MAG 용접토치를 V형 맞대기 수직자세로 용접을 실행하였다. 용접 완료 후 용접부의 표면비드 상태의 형상을 육안검사 관찰하고 또한 이를 방사선투과검사를 통해 용접부의 내부 용접품질에 대하여 용접현상을 분석하였다. 이 연구를 통해 용접결함 감소, 원가절감 및 기존 상용용접기에 교체사용에 대한 성능 및 호환성여부에 미치는 영향에 대해 평가하였다.

100㎛급 글라스 버블 혼입 시멘트계 초경량 무기 단열재의 단열 및 난연특성 (Thermal Insulation and Flame Retardant Properties of Cement Based Super Light-weight Inorganic Thermal Insulation using 100㎛ Grade Glass Bubble)

  • 손배근;송훈
    • 한국건설순환자원학회논문집
    • /
    • 제9권4호
    • /
    • pp.642-649
    • /
    • 2021
  • 건축물의 에너지 절약기준이 강화되면서 외단열 공법의 적용과 단열재 두께가 증가하고 있다. 유기계 단열재는 시공성, 경제성 등 시공비용 절감 효과와 뛰어난 단열성능을 가지고 있다. 하지만, 유기계 단열재 특성상 열에 매우 취약하므로 화재 발생 시 급격한 화재확산과 유독가스 발생으로 심각한 피해가 발생한다. 무기계 단열재는 기본적으로 불연성능을 가지나 무겁고 유기계 단열재에 비해 단열성능이 떨어진다. 글라스 버블은 소다 라임 보로실리케이트 유리로 밀도가 매우 낮고, 내부가 비어 있는 구형의 입자로 볼베어링 효과로 유동성이 개선된다. 또한, 무기계 단열재에 혼입하여 사용할 경우 밀도와 단열성능이 개선된다. 본 연구는 시멘트계 재료와 글라스 버블을 혼합하여 무기 단열재를 제조하였고 단열, 난연 및 불연성능을 평가하였다. 연구 결과, 글라스 버블의 혼입률이 증가할수록 열린 기공을 형성하고 있으나, 기공 및 셀 벽에 분포됨에 따라 충분한 단열성능을 보인다. 또한, 글라스 버블의 혼입률은 10% 이하로 사용하는 것이 바람직하다.

기구축 공간정보를 활용한 건물객체 변화 탐지 연구 - 도로명주소건물DB 중심으로 - (A Study on Building Object Change Detection using Spatial Information - Building DB based on Road Name Address -)

  • 이인수;연성현;정호현
    • 지적과 국토정보
    • /
    • 제52권1호
    • /
    • pp.105-118
    • /
    • 2022
  • 최근 메타버스, 스마트시티, 디지털트윈, 자율주행차, 도심항공모빌리티 등 분야에서 3D공간객체모델 관련 정보 요구는 증가될 것이다. 공간객체에 대한 3D모델 구축은 위성·항공·지상플랫폼과 같은 다양한 장비와 모델링·인공지능·영상정합 등의 기술로 가능하다. 하지만 갱신이 필요한 공간객체를 신속하게 탐지하고 DB화하는 작업은 쉽지 않다. 이 연구에서는 공간정보(도형)과 속성을 기반으로 주소코드, 층수, 건물명, 면적 등의 매칭요소를 이용하여 건물융합DB와 변화탐지건물DB를 구축 지원할 수 있고 갱신이 필요한 객체선정의 적합성을 검증할 수 있는 시스템 프로토타입을 개발하였다. 건물융합DB 구축 시 일부 건물의 경우, 공간정보와 속성의 융합불가 및 실패 사례가 발생하여, 매칭율이 약 80%로 낮게 나타났다. 이것은 특별히 시범사업지역 내 많은 건물객체에 대한 속성정보가 누락된 것에 기인하는 것으로 판단된다. 이 연구는 3D공간객체 모델의 신속한 갱신을 위한 효율적인 드론 촬영계획 수립을 지원하여 공간객체의 중복 및 불필요한 구축 등을 사전에 방지함으로써 객체 구축 절차 개선 및 비용 절감에 크게 기여할 것이다.

토양굴취력이 향상된 스크류형 경량 식혈기 개발(I) - 설계 및 제작 - (Development of Screw-Type Handy Earth Auger for an Improved Digging Efficiency(I) - Design and Manufacture -)

  • 김진현;이재현;김기동;고치웅;김동근
    • 농업생명과학연구
    • /
    • 제50권3호
    • /
    • pp.31-41
    • /
    • 2016
  • 본 연구는 산림조성사업에 있어서 가장 큰 비중을 차지하는 인건비와 생산비용을 절감시키고 경사가 험준한 우리나라 산림지형에서 유용하게 이용 가능한 경량 식혈기를 개발하고자 수행하였다. 제작된 1차 시제품은 토양을 굴취하는 스크류(screw) 부분과 동력원인 배터리로 구성되고, 제원은 스크류의 길이 170mm, 상단폭 60mm, 하단폭 47mm, 나선각(Helix angle)은 23°, 그리고 Tip은 송곳형태로 길이 50mm로 설계·제작하였고 무게를 줄이기 위해 1줄 스크류를 채택하였다. 또한, 동력원으로는 회전용 DC Motor(WD-6G2425, WONILL, Korea)로 최대 Torque는 30㎏f-cm, 회전속도는 20~30rpm으로 설정하였다. 감속비는 30:1의 K6G30C 감속기에 무부하 상태로 사용한 결과 48시간 작동하였다. 그리고 배터리는 경량식재기의 개발을 목표로 하기 때문에 무게를 고려하여 리듐배터리를 사용하였으며, 포트묘의 길이가 15cm 내외인 점을 고려하면 스크류의 회전력이 최대 100kgf-cm정도로 설계하였다. 1차 시제품의 성능을 평가하기 위해 조사지에서 굴취시 스크류에 소요되는 회전력을 측정한 결과, 회전력이 가장 큰 곳은 A area(단단한 초지), 그 다음은 F area(경사가 40°인 산지), E area(경사가 30°인 산지)의 순서로 나타났다. 토양의 굴취 회전력은 일반적으로 깊이가 깊어질수록 높아지는 경향을 보이고 있으며, 대체적으로 토양의 깊이 10cm 부근에서 높은 경향을 보였다.

Evaluation of Soil Streptomyces spp. for the Biological Control of Fusarium Wilt Disease and Growth Promotion in Tomato and Banana

  • Praphat, Kawicha;Jariya, Nitayaros;Prakob, Saman;Sirikanya, Thaporn;Thanwanit, Thanyasiriwat;Khanitta, Somtrakoon;Kusavadee, Sangdee;Aphidech, Sangdee
    • The Plant Pathology Journal
    • /
    • 제39권1호
    • /
    • pp.108-122
    • /
    • 2023
  • Fusarium oxysporum f. sp. lycopersici (Fol) and Fusarium oxysporum f. sp. cubense (Foc), are the causal agent of Fusarium wilt disease of tomato and banana, respectively, and cause significant yield losses worldwide. A cost-effective measure, such as biological control agents, was used as an alternative method to control these pathogens. Therefore, in this study, six isolates of the Streptomyces-like colony were isolated from soils and their antagonistic activity against phytopathogenic fungi and plant growth-promoting (PGP) activity were assessed. The results showed that these isolates could inhibit the mycelial growth of Fol and Foc. Among them, isolate STRM304 showed the highest percentage of mycelial growth reduction and broad-spectrum antagonistic activity against all tested fungi. In the pot experiment study, the culture filtrate of isolates STRM103 and STRM104 significantly decreased disease severity and symptoms in Fol inoculated plants. Similarly, the culture filtrate of the STRM304 isolate significantly reduced the severity of the disease and symptoms of the disease in Foc inoculated plants. The PGP activity test presents PGP activities, such as indole acetic acid production, phosphate solubilization, starch hydrolysis, lignin hydrolysis, and cellulase activity. Interestingly, the application of the culture filtrate from all isolates increased the percentage of tomato seed germination and stimulated the growth of tomato plants and banana seedlings, increasing the elongation of the shoot and the root and shoot and root weight compared to the control treatment. Therefore, the isolate STRM103 and STRM104, and STRM304 could be used as biocontrol and PGP agents for tomato and banana, respectively, in sustainable agriculture.

음이온 교환막 수전해 적용을 위한 고균일 고내구 코발트 산화물 전극의 제조 및 공정 조건 최적화 (Optimization of fabrication and process conditions for highly uniform and durable cobalt oxide electrodes for anion exchange membrane water electrolysis)

  • 이호석;명신우;박준영;박언주;허성준;김남인;이재훈;이재훈;정재엽;진송;이주영;이상호;김치호;최승목
    • 한국표면공학회지
    • /
    • 제56권6호
    • /
    • pp.412-419
    • /
    • 2023
  • Anion exchange membrane electrolysis is considered a promising next-generation hydrogen production technology that can produce low-cost, clean hydrogen. However, anion exchange membrane electrolysis technology is in its early stages of development and requires intensive research on electrodes, which are a key component of the catalyst-system interface. In this study, we optimized the pressure conditions of the hot-pressing process to manufacture cobalt oxide electrodes for the development of a high uniformity and high adhesion electrode production process for the oxygen evolution reaction. As the pressure increased, the reduction of pores within the electrode and increased densification of catalytic particles led to the formation of a uniform electrode surface. The cobalt oxide electrode optimized for pressure conditions exhibited improved catalytic activity and durability. The optimized electrode was used as the anode in an AEMWE single cell, exhibiting a current density of 1.53 A cm-2 at a cell voltage of 1.85 V. In a durability test conducted for 100 h at a constant current density of 500 mA cm-2, it demonstrated excellent durability with a low degradation rate of 15.9 mV kh-1, maintaining 99% of its initial performance.

화력발전소용 석탄분진의 최소폭발농도와 폭발강도 평가 (An Evaluation of Minimum Explosible Concentration and Explosion Severity of Coal Dust in a Thermal Power Plant)

  • 윤여송;이근원
    • 한국가스학회지
    • /
    • 제27권4호
    • /
    • pp.62-69
    • /
    • 2023
  • 화력발전소용 석탄에 대한 연소기술의 발전과 원가절감을 위해 저급탄의 사용량이 지속적으로 증가하고 있다. 연소 시 수분에 의한 증발잠열 손실이 크고 탄을 저장하고 미분화하는 과정에서 자연발화와 분진의 폭발위험이 있다. 본 연구는 국내 D 발전사에서 채취한 석탄분진(coal powder)으로 Coal dust-fine, Coal dust-coarse, Wood pallet+organic dust 및 Wood chip 4종에 대한 최소폭발농도와 폭발강도를 비교 평가하였다. 석탄 분진의 최소폭발농도는 JIS Z 8818:2002에 따라 측정하였으며, 폭발강도는 Siwek 20 L Chamber Apparatus를 이용하여 ASTM E1226에 따라 실험을 실시하였다. 최소폭발농도 시험결과 coal dust-fine가 분진폭발 위험이 있는 것으로 나타났으며, wood chip의 분진농도 130 g/m3에서 폭발이 일어나므로 가장 낮은 분진농도에서 폭발의 위험이 있는 것을 알 수 있었다. 분진폭발 등급 기준에 따르면 Kst가 200 bar m/s 이하로 모든 시료가 폭발등급 St 1등급에 해당되며, 폭발의 위험성이 약한 분진으로 평가되었다.

Quality Reporting of Radiomics Analysis in Mild Cognitive Impairment and Alzheimer's Disease: A Roadmap for Moving Forward

  • So Yeon Won;Yae Won Park;Mina Park;Sung Soo Ahn;Jinna Kim;Seung-Koo Lee
    • Korean Journal of Radiology
    • /
    • 제21권12호
    • /
    • pp.1345-1354
    • /
    • 2020
  • Objective: To evaluate radiomics analysis in studies on mild cognitive impairment (MCI) and Alzheimer's disease (AD) using a radiomics quality score (RQS) system to establish a roadmap for further improvement in clinical use. Materials and Methods: PubMed MEDLINE and EMBASE were searched using the terms 'cognitive impairment' or 'Alzheimer' or 'dementia' and 'radiomic' or 'texture' or 'radiogenomic' for articles published until March 2020. From 258 articles, 26 relevant original research articles were selected. Two neuroradiologists assessed the quality of the methodology according to the RQS. Adherence rates for the following six key domains were evaluated: image protocol and reproducibility, feature reduction and validation, biologic/clinical utility, performance index, high level of evidence, and open science. Results: The hippocampus was the most frequently analyzed (46.2%) anatomical structure. Of the 26 studies, 16 (61.5%) used an open source database (14 from Alzheimer's Disease Neuroimaging Initiative and 2 from Open Access Series of Imaging Studies). The mean RQS was 3.6 out of 36 (9.9%), and the basic adherence rate was 27.6%. Only one study (3.8%) performed external validation. The adherence rate was relatively high for reporting the imaging protocol (96.2%), multiple segmentation (76.9%), discrimination statistics (69.2%), and open science and data (65.4%) but low for conducting test-retest analysis (7.7%) and biologic correlation (3.8%). None of the studies stated potential clinical utility, conducted a phantom study, performed cut-off analysis or calibration statistics, was a prospective study, or conducted cost-effectiveness analysis, resulting in a low level of evidence. Conclusion: The quality of radiomics reporting in MCI and AD studies is suboptimal. Validation is necessary using external dataset, and improvements need to be made to feature reproducibility, feature selection, clinical utility, model performance index, and pursuits of a higher level of evidence.