• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.380-385
• /
• 2014

Spherical atomizing reduction steel slag was prepared by atomizing technology using reduction steel slag (ladle furnace slag, LFS) generated from steel industry. In order to develop the mass-recycling technology of atomizing reduction steel slag, polymer concrete composite was prepared using spherical atomizing reduction steel slag instead of fine aggregate (river sand) and coarse aggregate (crushed aggregate), depending on the grain size. Different polymer concrete specimens were prepared with the various proportions of polymer binder and replacement ratios of atomizing reduction steel slag in order to investigate the characteristics of polymer concrete composite. Results showed that compressive strengths of polymer concrete specimens decreased with the increase of replacement ratios of atomizing reduction steel slag, but flexural strengths of the specimens showed a maximum strength at the 50% of replacement ratios of atomizing reduction steel slag. It was concluded that addition ratio of polymer binder, which affect greatly on the prime cost of production of polymer concrete, could be reduced by maximum 18.2 vol% because the workability of the polymer concrete was remarkably improved by using the atomizing reduction steel slag. However, further study is required because the mechanical strength of the specimen using atomizing reduction steel slag was greatly reduced in hot water resistance test.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.349-360
• /
• 2009

The cone penetration test(CPT) has gained its popularity in site characterization indebted by its reliability, speed, economy, and automatic measurement system since its development in the 1930s. The CPT results, commonly consisting of cone tip resistance, sleeve friction, and pore water pressure measurements, allow us to classify soils as well as to reveal their engineering characteristics. The site condition at which the CPT is allowable is often dependent on the capacity of a CPT system. In Korea, it has been considered that the CPT could be appled only to soft soils in most cases because CPT systems available for stiff soils are very rare due to their expensive procurement and maintenance cost. Luoisiana Transportation Research Center(LTRC) has developed and implemented a field-rugged continuous intrusion miniature cone penetration test(CIMCPT) system since the late 1990s. The miniature cone penetrometer has a sectional cone area of $2cm^2$ allowing system capacity reduction compared to the standard $10cm^2$ cone penetrometer. The continuous intrusion mechanism allows fast and economic site investigation. Samsung Engineering & Construction has recently developed and implemented a similar CIMCPT system based on its original version developed in LTRC. The performance of the Samsung CIMCPT system has been investigated by calibration with the standard CPT system at a well-characterized test site in Pusan, Korea. In addition, scale effect between the miniature cone penetrometer and the standard cone penetrometer has been investigated by comparing the field test results using the both systems.

• ETRI Journal
• /
• v.36 no.3
• /
• pp.407-417
• /
• 2014

A new-generation video coding standard, named High Efficiency Video Coding (HEVC), has recently been developed by JCT-VC. This new standard provides a significant improvement in picture quality, especially for high-resolution videos. However, one the most important challenges in HEVC is time complexity. A quadtree-based structure is created for the encoding and decoding processes and the rate-distortion (RD) cost is calculated for all possible dimensions of coding units in the quadtree. This provides a high encoding quality, but also causes computational complexity. We focus on a reduction scheme of the computational complexity and propose a new approach that can terminate the quadtree-based structure early, based on the RD costs of the parent and current levels. Our proposed algorithm is compared with HEVC Test Model version 10.0 software and a previously proposed algorithm. Experimental results show that our algorithm provides a significant time reduction for encoding, with only a small loss in video quality.

• Steel and Composite Structures
• /
• v.12 no.5
• /
• pp.379-393
• /
• 2012

Many steel bridge infrastructures in the world are getting older, and a large number of these structures are in need of maintenance, rehabilitation or replacement. Most of them are subjected to corrosion due to exposure to aggressive environmental conditions and inadequate maintenance, causing reduction of their carrying capacities. In order to have an adequate bridge management, it is of paramount importance to develop an efficient, accurate and rapid condition assessment method which can be used to make reliable decisions affecting the cost and safety. Therefore, a simple and accurate method of calculating remaining yield and tensile strength by using a concept of representative effective thickness with correlation of initial thickness and maximum corroded depth is proposed in this study, based on the results of many tensile coupon tests of corroded plates obtained from a steel plate girder with severe corrosion, used for about 100 years. Furthermore, a strength reduction diagram which will be very useful for bridge inspection engineers to make rational decisions about the maintenance management of aged steel bridge infrastructures is presented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.8
• /
• pp.121-128
• /
• 2007

In this thesis, we would show how to lay out and produce the shell-type transformer using the world's first Zig-Zag winding way, instead of a general winding. Also, we omit the progress of varnish-impregnation, so that we could develop the new shell-type transformer winding which improves the short-circuit characteristics and dielectric strength. It has a copernican effect to reduce the thickness and the number of insulation papers, as compared with a general winding transformer. We would prove that it is far superior in cost reduction, loss reduction, and mechanical force of short-circuit. And eventually you must find it useful in the pole transformer for power distribution in the domestic power companies.

• Journal of the Korean Society for Railway
• /
• v.12 no.1
• /
• pp.167-174
• /
• 2009

Due to the travelling of the train with high speed the period of maintenance activities of the ballasted track is coming to be short, and more from the residential area of the ballasted track tunnel circumference the civil appeal is increasing with railroad vibration problem. To reduce the vibration problem and a maintenance cost establishes the ballast mat in the tunnel within part segment. In this study, to estimate the vibration reduction effect of the ballast mat we have done a comparative analysis with the vibration field test by the transit train by at the ballasted track with ballast mat and the standard ballasted track without vibration protection in tunnel.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.12
• /
• pp.323-336
• /
• 2021

The present study aims to examine the impact of real earnings management on the future value of the firm and its persistence. The study also tests suspect firm effects on the relationship between real earnings management and the future value of the firm. The sample of the present study consists of all listed non-financial firms from the year 2011 to 2018. Real earnings management has been measured in three alternative ways viz., abnormal operating cash flows, abnormal discretionary spending, and abnormal production cost. Tobin's Q is used as a measure of firm value. The interaction term of real earnings management and Tobin's Q is used to test firm value persistence. The results of the analysis disclose that out of three measures of real earnings management, abnormal reduction in discretionary spending only has a significant negative impact on the persistence of firm value. Moreover, the suspect firm analysis reveals that when the underlying motive of real earnings management is to meet zero earnings, both abnormal increases in operating cash flows and abnormal reduction in discretionary spending have a significant negative impact on firm value persistence.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.76-83
• /
• 2010

Recently, as the current and future emission regulations go stringent, the research of NOx reduction has become a subject of increasing interest and attention in diesel engine. Selective Catalytic Reduction (SCR) is one of the effective technology to reduce NOx emission from diesel engine. Especially, Urea-SCR that uses urea as a reductant is becoming increasingly popular as a cost effective way of reducing NOx emissions from heavy duty vehicles. In this research, we designed urea injector and DCU (Dosing Control Unit) specially developed for controlling the Urea-SCR process onboard vehicles. As passenger and commercial diesel engine experiment, we grasped characteristics of NOx emission and SCR catalyst temperature level in advance. As a result, highest NOx emission level was shown in condition of low engine speed and high load. On the other hand, SCR catalyst temperature was highest at high engine speed and load. On the basis of these result, we conducted the NOx reduction test at steady engine operating conditions using the urea injector and DCU. It was shown that 74% NOx conversion efficiency on the average and 97% NOx conversion efficiency was obtained at high SCR catalyst temperature.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.1
• /
• pp.12-18
• /
• 2012

The prohibitively high cost of Pt catalyst might be the biggest barrier for the commercialization of proton exchange membrane fuel cells (PEMFC) of which wide application is expected. Worldwide research efforts for the development of alternative to Pt oxygen reduction reaction (ORR) catalyst are made recently. One of the important considerations in the catalyst development is durability issue as well as economic aspect. From this point of view, platinum group metals (PGM) except Pt can be a candidate for replacing Pt catalyst because the material properties and the catalytic activity of PGM are expected to be similar to Pt. In contrast to Ir, Rh and Os to which not so much attention has been paid as an ORR catalyst, Pd that is most similar to Pt in terms of material properties and catalytic activity and Ru that is in the form of chalcogenide have been studied intensively. Activity comparison between non-Pt and Pt oxygen reduction catalysts by half cell test using RDE (rotating disk electrode) or PEMFC MEA (membrane electrode assembly) operation indicates that Pd-based catalysts show the most similar activity to Pt. In this paper we analyze the composition of PGM ORR catalyst in literature to promote the development of non-Pt ORR catalyst.

• Journal of Acupuncture Research
• /
• v.41 no.2
• /
• pp.115-120
• /
• 2024

Background: Migraine is a common disabling headache that affects every aspect of a person's life. Auricular acupuncture is a cost-effective treatment modality for the management of painful neurological conditions. Previous studies have shown the beneficial effects of a combination of ear points in the management of migraines. However, no studies have evaluated the efficacy of a single auricular point (i.e., sympathetic point) in migraine. Thus, this study evaluated the efficacy of sympathetic points on pain intensity and depression levels in patients with migraine. Methods: In this randomized controlled study, 100 patients with migraine aged 18-45 years were randomly divided into either an auricular acupuncture group (AAG) (n = 50) or a placebo control group (PCG) (n = 50). The AAG underwent needling at the sympathetic point (an auricular acupuncture point), whereas the PCG underwent needling at a non-acupuncture point for 20 minutes daily for 7 days. Assessments were performed before and after the intervention using a 6-item headache impact test (HIT-6) and Beck depression inventory (BDI) scale. Statistical analyses were performed using SPSS version 16. Results: In within-group analysis, the AAG showed a significant reduction in HIT-6 and BDI, whereas the PCG showed a significant increase in HIT-6 and a significant reduction in BDI. In between-groups analyses, HIT-6 reduced significantly in the AAG compared with that in the PCG, whereas BDI reduced significantly in the PCG compared with that in the AAG. Conclusion: In patients with migraine, needling at the sympathetic point produces a greater reduction in the pain intensity level and lesser reduction in the depression level compared to needling at a non-acupuncture point.