• 한국IT서비스학회:학술대회논문집
• /
• 2002.11a
• /
• pp.417-422
• /
• 2002

Use Case는 일반적으로 시스템의 기능적 요소를 나타내기 위하여 활용하며, 고객의 요구사항을 반영하여 작성을 한다. 그러므로 Use Case 규격대로 시스템이 구현되었는가를 검증하는 것은 고객이 원하는 시스템이 구현되었는가를 검증하는 것이라 할 수 있다. 그러므로 Use Case를 기반으로 테스트를 수행 하기 위한 테스트 케이스 작성이 필요하다. 본 논문에서는 Use Case를 이용하여 테스트 케이스를 도출하는 과정을 제안하고, 이에 의하여 확보되는 테스트 커버리지의 의미를 설명한다.

• Particle and aerosol research
• /
• v.10 no.2
• /
• pp.83-91
• /
• 2014

Since airborne bacteria have been known to aggravate indoor air quality, studies on reducing bacteria particles increase recently. In this study, a chamber(0.8m x 0.8m x 1.56m) system was built in order to simulate real conditions for reducing airborne bacteria, and evaluated by a simple aerosol reduction test. A method utilizing CFD(Computational Fluid Dynamics) simulation was used to detect the horizontal cross-sectional area which represents particle distribution in the chamber. Then an air-cleaner with HEPA filter and Carbon Fiber Ionizer was located on that area for aerosol reduction test. The CFD result found the area was located at 0.2m height from the bottom of the chamber, and the test showed aerosol reduction efficiencies using measurements of number concentration and CFU(colony forming unit) per each case. At the measurement of number concentration, the reduction efficiency of air-cleaner with filter and ionizer(Case 3) was about 90% after 4 minutes from the stop of the bacteria injection, and that with only filter(Case 2) was about 90% after 8 minutes from the beginning. Lastly, that without filter and ionizer(Case 1) was about 30% after 10 minutes. At the measurement of CFU, it shows similar results but it is related to viability of bio-aerosol.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.19 no.2
• /
• pp.197-215
• /
• 2015

Modeling water flow in variably saturated, porous media is important in many branches of science and engineering. Highly nonlinear relationships between water content and hydraulic conductivity and soil-water pressure result in very steep wetting fronts causing numerical problems. These include poor efficiency when modeling water infiltration into very dry porous media, and numerical oscillation near a steep wetting front. A one-dimensional finite element formulation is developed for the numerical simulation of variably saturated flow systems. First order backward Euler implicit and second order Crank-Nicolson time discretization schemes are adopted as a solution strategy in this formulation based on Picard and Newton iterative techniques. Five examples are used to investigate the numerical performance of two approaches and the different factors are highlighted that can affect their convergence and efficiency. The first test case deals with sharp moisture front that infiltrates into the soil column. It shows the capability of providing a mass-conservative behavior. Saturated conditions are not developed in the second test case. Involving of dry initial condition and steep wetting front are the main numerical complexity of the third test example. Fourth test case is a rapid infiltration of water from the surface, followed by a period of redistribution of the water due to the dynamic boundary condition. The last one-dimensional test case involves flow into a layered soil with variable initial conditions. The numerical results indicate that the Crank-Nicolson scheme is inefficient compared to fully implicit backward Euler scheme for the layered soil problem but offers same accuracy for the other homogeneous soil cases.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.4
• /
• pp.5-21
• /
• 2012

In our country, in the case of traditional design of pile foundations, only a design depending on end bearing has been performed. However, through the load transfer measurement data that have been carried out for in-situ piles, it was known that skin frictional force was mobilized greatly. In this study, through the analysis of the load transfer test cases of driven steel pipe piles and large-diameter drilled shafts, load bearing aspects of pile foundation depending on pile construction methods and pile load test methods were established. The average sharing ratios of skin frictional force were independent of pile types, pile load test methods, relative pile lengths, pile diameters and soil types. Because the average sharing ratios were over 50%, the case pile foundations mostly behaved as a friction pile and the extremely partial case pile foundation behaved as a combined load bearing pile.

• Journal of Korean Academy of Nursing
• /
• v.29 no.5
• /
• pp.1103-1112
• /
• 1999

In the last few years, psychiatric nurse practitioners have shown a growing an interest in community psychosocial rehabilitation, caring for chronic psychiatric patients as case manager in South Korea. The purpose of this study was to evaluate the effectiveness of a community psychiatric rehabilitation nursing program on self-care activity and quality of life and to suggest this program as an effective nursing intervention in a group of chronic home-based psychiatric patients in a poor town. A nonequivalent control group, pretest-posttest design was used. Of the twenty women that started the program, sixteen finished it. The data were analyzed by the Wilcoxon Rank Sum Test. The program included the process of case management which consisted of four phases: the first was an active case finding and pre-test, the second was home visiting and contacted by phone. the third was group activity therapy of 12 sessions, and the fourth phase was terminal and post-test. The effects of the program were assessed by quality of life and self-care activity. The quality of life and the self-care activity, especially, area of nutrition. elimination, dressing. leisure activity, and follow-up clinic visiting showed greater improvement than those of the control group. The results of this study suggest that this program was effective in improving the quality of life of chronic home-based psychiatric patients.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1066-1071
• /
• 2007

This case study refers to turbine-generator with retrofitted turbine rotor. Vibration problem occurring after the retrofit was mainly due to high vibration from exciter side. However, repeated test run and operation during scheduled maintenance caused high vibration from generator bearing, and post-overhaul test run before turbine vibration correction caused oil whip on the bearing. This case study shows how to analyze vibration condition of high turbine generator vibration detected during the post-overhaul test run and vibration condition of offline and online data to reflect it on establishing maintenance schedule and overhaul correction procedure. Vibration data could be acquired during steady load operation or even with varying speed and load. Each data is important for machinery condition evaluation. This case study shows that the vibration data during extreme condition is the key factor in analysis, which helps to find the machinery problem.

• Journal of Korean Public Health Nursing
• /
• v.28 no.1
• /
• pp.32-45
• /
• 2014

Purpose: The purpose of this study was to test the effectiveness of an eight session integrated case management program for improvement of medication adherence, physical function, pain, and depression among medical aid beneficiaries with osteoarthritis. Method: A nonequivalent control group pre-posttest design was employed. Participants were 55 medical aid beneficiaries who agreed to participate in this study, and were assigned to an experimental group (n=28) or control group (n=27). The framework of this research derived from Cox's Interaction Model of Client Health Behavior guided the overall intervention and the components. The program led by a case manager with a medication calendar, motivating interviewing and coaching strategies and collaboration with a pharmacist. Analysis included change in scores, ${\chi}^2$-test, and t-test. Result: The results showed significant increase in medication adherence, physical function and decrease joint pain, joint stiffness and depression in the experimental group compared to the control group. Conclusion: The eight session integrated case management program indicated an effect on medication adherence, pain, physical function, and depression. Partnership with a pharmacist is recommended for medication adherence and conduct of further studies will be needed in order to determine the long-term effect of an extended integrated program on health outcomes.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.183-186
• /
• 2008

Both structural analysis and hydraulic test have been conducted to confirm the burst characteristics of filament wound solid motor case. Failure criteria have been defined with bursting above 150% of MEOP and failure in the cylinder. The results of analysis showed that filament fiber in the cylinder should be broken at about 2088psig. From a hydraulic test the same failure mode and the level of 2200psig of burst pressure have been proved. With these results, it is verified that a filament wound case meets burst requirements.

• Transactions of Materials Processing
• /
• v.29 no.5
• /
• pp.272-281
• /
• 2020

As the thickness of mobile communication devices is getting thinner, the size of the internal parts is also getting smaller. Among them, the battery case requires a high-level deep drawing technique because it has a rectangular shape with a large aspect ratio. In this study, the initial blank shape was optimized to minimize earing in a multi-stage deep drawing process using an artificial neural network(ANN). There has been no reported case of applying artificial neural network technology to the initial blank optimal design for a square case with large aspect ratio. The training data for ANN were obtained though simulation, and the model reliability was verified by performing comparative study with regression model using random sample test and goodness-of-fit test. Finally, the optimal design of the initial blank shape was performed through the verified ANN model.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.2
• /
• pp.238-246
• /
• 2008

This case study refers to turbine-generator with retrofitted turbine rotor. Vibration problem occurring after the retrofit was mainly due to high vibration from exciter side. However, repeated test run and operation during scheduled maintenance caused high vibration from generator bearing, and post-overhaul test run before turbine vibration correction caused oil whip on the bearing. This case study shows how to analyze vibration condition of high turbine generator vibration detected during the post-overhaul test run and vibration condition of offline and online data to reflect it on establishing maintenance schedule and overhaul correction procedure. Vibration data could be acquired during steady load operation or even with varying speed and load. Each data is important for machinery condition evaluation. This case study shows that the vibration data during extreme condition is the key factor in analysis, which helps to find the machinery problem.