• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.651-662
• /
• 2022

The electrochemical impedance spectroscopy(EIS) method was used to evaluate the concrete deterioration process related to chloride-induced steel corrosion with various corrosion levels(initiation, rust propagation and acceleration periods). The impressed current technique, with four total current levels of 0C, 13C, 65C and 130C, was used to accelerate steel corrosion in concrete cylinder samples with w/c ratio of 0.4, 0.5, and 0.6, immersed in a 0.5M NaCl solution. A series of EIS measurements was performed to monitor concrete deterioration during the accelerated corrosion test in this study. Some critical parameters of the equivalent circuit were obtained through the EIS analysis. It was observed that the charge transfer resistance(R_c) dropped sharply as the impressed current increased from 0C to 13C, indicating a value of approximately 10kΩcm². However, the sensitivity of R_c significantly decreased when the impressed current was further increased from 13C to 130C after corrosion of steel had been initiated. Meanwhile, the double-layer capacitance value(C_dl) linearly increased from 50×10^-6μF/cm² to 250×10^-6μF/cm² as the impressed current in creased from 0C to 130C. The results in this study showed that monitoring C_dl is an effective measurement parameter for evaluating the progress of internal concrete damages(de-bonding between steel and concrete, micro-cracks, and surface-breaking cracks) induced by steel corrosion. The findings of this study provide a fundamental basis for developing an embedded sensor and signal interpretation method for monitoring concrete deterioration due to steel corrosion at various corrosion levels.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.4
• /
• pp.63-76
• /
• 2022

This study was conducted to compare the perceptions of the park use status, importance, and satisfaction of users in the first implemented and completed Uijeongbu Jikdong Neighborhood Park among the private park special projects carried out as a countermeasure for long-term non-execution of urban parks. To this end, in the initiated project, apartment residents and non-residents were classified according to the promotion plan, and a questionnaire research on importance and satisfaction was conducted to analyze the park use status and IPA(importance-performance analysis). First, as a result of the analysis of the current situation in terms of locational characteristics that occur during the promotion of special projects for private parks, unlike the mountainous areas, the targeted site was close to flat land, indicating that users' satisfaction with the landscape was high. Second, the access of the apartment residents in the initiated project site was easy. Thus, the use rate of residents was relatively higher than that of the non-residents. Third, differences in perception by item were identified through the analysis of IPA and the establishment of strategies. In quadrant I, among the facilities and services, installing restrooms was the priority for residents, and parking facilities and rest facilities were the priority than installing restrooms for non-residents. In quadrant II, overall scores for residents and non-residents were similar, but the distance to the park was in quadrant III due to the low level of satisfaction among non-residents. In this study, the difference in perception between residents and non-residents may cause problems in access and facilities in managing the park in the future. Therefore, it would be necessary to find a way to improve it by establishing a management strategy that takes into account the difference in the perception of residents after construction. In addition, through the results of this study, it was judged that the purpose of park development, the selection of types of parks, and the selection of plans and management indicators for each kind would be significant in the promotion of initiated projects in the planning of park development.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.1
• /
• pp.20-26
• /
• 2023

Fiber content in the storage roots of sweetpotato varies between different varieties. For examples, the high fiber content of certain types has a poor texture when steamed or roasted. This study was conducted to evaluate the optimal sieve mesh size for separating fibers, the chemical composition of fibers and differences in fiber content among different varieties. We found that the separated fiber content (dry weight) of mashed and steamed sweetpotato was higher after washing three times (143.3 mg/100 g) compared with that washed five times (128.4 mg/100 g). The Hogammi variety remained 85.9% of total fiber content at 10 mesh (2,000 ㎛) and 9.6% of total fiber content at 30 mesh (600 ㎛), and Jinyulmi remained 74.9 and 16.7% of total fiber content , respectively. Therefore, a 30 mesh sieve was considered the most suitable for fiber separation. Among the 10 studied cultivars, Jinhongmi showed the lowest amount of fiber (24.8 mg/100 g) and Hogammi had the highest amount (111.4 mg/100 g), which was 4.5 times larger than that of Jinhongmi. Cellulose, hemicellulose and lignin content of separated fibers showed no difference between the viscous-type Hogammi and powdery-type Jinyulmi varieties, with averages of 32.5, 22.3 and 29.6%, respectively. Correlation results using the Image J program showed a significant correlation between the distribution of the stained area and the fiber content (R = 0.74, p < 0.05). Staining distribution differed among varieties, suggesting that a simple fiber content test could be performed using the staining method on raw sweetpotato. These results provide useful information to help inform farmers on the fiber content of different sweetpotato varieties.

• Journal of Nutrition and Health
• /
• v.56 no.1
• /
• pp.97-111
• /
• 2023

Purpose: Childhood obesity has become a social problem due to the social distancing necessitated by the coronavirus disease 2019 pandemic. This study aimed to identify the dietary problems of obese children through various dietary assessment methods and to confirm the usefulness of each method. Methods: The subjects were 88 students in the 4th to 6th grade of elementary school who participated in the nutrition camp organised by the Busan Metropolitan Office of Education, 2020. To evaluate dietary problems and assess diet quality, 24-hour meal records, monthly food intake frequency, and Dietary Screening Test (DST) data were analyzed. Results: Of the subjects, 15.7%, 30.3%, and 53.9% were normal weight, overweight, and obese, respectively. The average age was 11.77 ± 0.77 years and the average body mass index was 23.96 ± 3.01 kg/m². It was observed from the 24-hour meal record method that the overweight and obese subject groups consumed fewer green vegetables (p < 0.001) and white vegetables (p < 0.01) than the normal weight group. In the monthly food intake frequency method, the consumption of ramen (p < 0.01), snacks (p < 0.05), and sausages (p < 0.05) were high in the obese group, and that of anchovies, broccoli, and sweet pumpkin was high in the normal group (p < 0.05). The comparative data from the DST revealed that the overweight and obese groups had less vegetable intake than the normal weight group (p < 0.01) and had higher intakes of dairy products, fast food, and sweet snacks (p < 0.05). Conclusion: The usefulness of each method in the dietary evaluation of obese children was confirmed. To address the problem of obesity, it is necessary to evaluate the dietary problem and approach it with a customized solution tailor-made for the individual subject.

• Korean Journal of Environmental Biology
• /
• v.41 no.2
• /
• pp.109-125
• /
• 2023

This study was conducted to select target fish species as baseline research for accumulation analysis of major hazardous chemicals entering the aquatic ecosystem in Korea and to analyze the impact on fish community. The test bed was selected from a sewage treatment plant, which could directly confirm the impact of the inflow of harmful chemicals, and the Geum River estuary where harmful chemicals introduced into the water system were concentrated. A multivariable metric model was developed to select target candidate fish species for hazardous chemical analysis. Details consisted of seven metrics: (1) commercially useful metric, (2) top-carnivorous species metric, (3) pollution fish indicator metric, (4) tolerance fish metric, (5) common abundant metric, (6) sampling availability (collectability) metric, and (7) widely distributed fish metric. Based on seven metric models for candidate fish species, eight species were selected as target candidates. The co-occurring dominant fish with target candidates was tolerant (50%), indicating that the highest abundance of tolerant species could be used as a water pollution indicator. A multi-metric fish-based model analysis for aquatic ecosystem health evaluation showed that the ecosystem health was diagnosed as "bad conditions". Physicochemical water quality variables also influenced fish feeding and tolerance guild in the testbed. Eight water quality parameters appeared high at the T1 site, indicating a large impact of discharging water from the sewage treatment plant. T2 site showed massive algal bloom, with chlorophyll concentration about 15 times higher compared to the reference site.

• Journal of Korean Dental Hygiene Science
• /
• v.6 no.1
• /
• pp.37-50
• /
• 2023

Background: This study investigated the structural relationships among justice, test anxiety, and school reliability s non-face-to-face tests of dental hygiene students. Methods: A survey was conducted with 267 dental hygiene students. The survey items included general characteristics, opinions on evaluation, the fairness of non-face-to-face tests (distributive, procedural, and interactional justice), school satisfaction, and school reliability. For statistical analysis, independent-sample t-tests, one-way ANOVA, and structural modeling analyses were performed. Results: Among factors that directly affected distributive justice and reliability towards non-face-to-face tests, the higher the interactional justice (β=0.401, p<0.001) and distributive justice (β=0.232, p=0.002) levels, the higher the school satisfaction. The higher the school satisfaction (β=0.606, p<0.001) and procedural justice (β=0.299, p<0.001) levels, the higher the perceived reliability of the school. Factors that indirectly affected school reliability included interactional justice (β=0.243, p=0.010) and distributive justice (β=0.141, p=0.010). Interactional justice (β=0.592, p=0.010) and distributive justice (β=0.208, p=0.010) were the factors affecting school satisfaction. Moreover, factors that influenced school reliability were distributive justice (β=0.56, p=0.010), interactional justice (β=0.332, p=0.010), procedural justice (β=0.229, p=0.010), and distributive justice (β=0.116, p=0.010). Conclusions: Students will trust and be satisfied with schools when schools and professors sufficiently provide information on face-to-face tests and ensure proper procedures to achieve reasonable grades as rewards for exerted time and effort. Furthermore, this study provides a reference base for developing a variety of content for fair, non-face-to-face tests, thereby allowing students to trust their schools.

• Journal of Science Education
• /
• v.47 no.2
• /
• pp.192-210
• /
• 2023

This study was intended to develop the plant molecular biology experimental program using Rapid-cycling Brassica rapa (RcBr) based on the teaching steps and teaching methods of the cognitive apprenticeship model and to determine its application effects. In order to improve a subject's cognitive function and expertise on molecular biology experiments, two themes composed of a total 8 class sessions were selected: 'Identification of DFR gene in purple RcBr and non-purple RcBr' and 'Identification of RcBr's genetic polymorphism site using the DNA profiling method'. Research subjects were 18 pre-service teaching majors in biology education of H University in Chungbuk, Korea. The effectiveness of the developed program was verified by analyzing the enhancement of 'cognitive function' related to the use of molecular biology knowledge and technology, and the enhancement of 'domain-general metacognitive abilities.' The effect of the developed program was also determined by analyzing the task flow diagram provided. The developed program was effective in improving the cognitive functions of the pre-service teachers on the use of knowledge and technology of molecular biology experiments. It was especially effective to improve the higher cognitive function of pre-service teachers who did not have the previous experience. The developed program also showed a significant improvement in the task of metacognitive knowledge and in the planning, checking, and evaluation of metacognitive regulation, which are sub-elements of domain-general metacognitive abilities. It was found that the developed program's self-test activity could help the pre-service teachers to improve their metacognitive regulation. Therefore, this developed program turned out to be helpful for pre-service teachers to develop core competencies needed for molecular biology experimental classes. If the teaching and learning materials of the developed program could be reconstructed and applied to in-service teachers or high school students, it would be expected to improve their metacognitive abilities.

• Korean Journal of Ecology and Environment
• /
• v.56 no.1
• /
• pp.45-56
• /
• 2023

In stream ecosystem assessment, RIVPACS, which makes a simple but clear evaluation based on macroinvertebrate community, is widely used. In this study, a preliminary study was conducted to develop a RIVPACS-type model suitable for Korean streams nationwide. Reference streams were classified into two types(upstream and downstream), and a prediction model for macroinvertebrates was developed based on each family. A model for upstream was divided into 7 (train): 3 (test), and that for downstream was made using a leave-one-out method. Variables for the models were selected by non-metric multidimensional scaling, and seven variables were chosen, including elevation, slope, annual average temperature, stream width, forest ratio in land use, riffle ratio in hydrological characteristics, and boulder ratio in substrate composition. Stream order classified 3,224 sites as upstream and downstream, and community compositions of sites were predicted. The prediction was conducted for 30 macroinvertebrate families. Expected (E) and observed fauna (O) were compared using an ASPT biotic index, which is computed by dividing the BMWPK score into the number of families in a community. EQR values (i.e. O/E) for ASPT were used to assess stream condition. Lastly, we compared EQR to BMI, an index that is commonly used in the assessment. In the results, the average observed ASPT was 4.82 (±2.04 SD) and the expected one was 6.30 (±0.79 SD), and the expected ASPT was higher than the observed one. In the comparison between EQR and BMI index, EQR generally showed a higher value than the BMI index.

• Resources Recycling
• /
• v.31 no.6
• /
• pp.44-51
• /
• 2022

In the steelmaking process using an electric arc furnace (EAF), light-burnt dolomite, which is a flux containing MgO, is used to protect refractory materials and improve desulfurization ability. Furthermore, a recarburizing agent is added to reduce energy consumption via slag foaming and to induce the deoxidation effect. Herein, a waste MgO-C based refractory material was used to achieve the aforementioned effects economically. The waste MgO-C refractory materials contain a significant amount of MgO and graphite components; however, most of these materials are currently discarded instead of being recycled. The mass recycling of waste MgO-C refractory materials would be achievable if their applicability as a flux for steelmaking is proven. Therefore, experiments were performed using a target composition range similar to the commercial EAF slag composition. A pre-melted base slag was prepared by mixing SiO₂, Al₂O₃, and FeO in an alumina crucible and heating at 1450℃ for 1 h or more. Subsequently, a mixed flux #2 (a mixture of light-burnt dolomite, waste MgO-C based refractory material, and limestone) was added to the prepared pre-melted base slag and a melting reaction test was performed. Injecting the pre-melted base slag with the flux facilitates the formation of the target EAF slag. These results were compared with that of mixed flux #1 (a mixture of light-burnt dolomite and limestone), which is a conventional steelmaking flux, and the possibility of replacement was evaluated. To obtain a reliable evaluation, characterization techniques like X-ray diffraction (XRD) analysis and X-ray fluorescence (XRF) spectrometry were used, and slag foam height, slag basicity, and Fe recovery were calculated.

• Journal of Service Research and Studies
• /
• v.13 no.1
• /
• pp.186-200
• /
• 2023

This study aims to improve the usability of the white cane, which is walking equipment that most local visually impaired people use and carry when going out, and to contribute to the prevention of safety accidents and the walking rights of visually impaired people by providing improvement and resolution measures for the problems identified. Also, this study is a study on the visually impaired, primarily targeting the 1st to 2nd degree visually impaired people, who cannot go out on their own without walking equipment such as a white cane, corresponding to 20% among approximately 250,000 blind and low vision people in the Korean population. In the study process, the concept has been developed from the user's point of view in order that the white cane becomes a real help in the walking step of the visually impaired and the improvement of usability of the white cane, the main walking equipment for the visually impaired, are done by problem identification through the Double Diamond Model of Design Thinking (Empathize → Define → Ideate → Prototype → Test (verify)). As a result of the investigation in the process of Empathy, a total of five issues was synthesized, including an increase in the proportion of the visually impaired people, an insufficient workforce situation to help all the visually impaired, an improvement and advancement of assistive devices essential for the visually impaired, problems of damage, illegal occupation, demolition, maintenance about braille blocks, making braille block paradigms for the visually impaired and for everyone. In Ideate and Prototype steps, situations derived from brainstorming were grouped and the relationship were made through the KJ method, and specific situations and major causes were organized to establish the direction of the concept. The derived solutions and major functions are defined in four categories, and representative situations requiring solutions and major functions are organized into two user scenarios. Ideas were visualized by arranging the virtual Persona and Customer Journey Map according to the situation and producing a prototype through 3D modeling. Finally, in the evaluation, the final concept derived is a device such a smart cane for guidance for the visually impaired as ① a smart cane emphasizing portability + ② compatibility with other electronic devices + ③ a product with safety and convenience.