• Journal of Korean Society for Geospatial Information Science
• /
• 제18권3호
• /
• pp.3-10
• /
• 2010

The development of various spatial information and GIS has led to the research on interpretation of natural phenomena and correlational studies. This study is aimed to analyze the correlation between RUSLE(Revised Universal Soil Loss Equation) around Nakdong River area during the period of 1955 to 2005 and the amount of area change in the islets at the estuary terrain calculated in the study "Change Detection at the Nakdong Estuary Delta using Satellite Image and GIS". For the calculation of RUSLE, The 'Revised-USLE' model, a modified USLE model commonly used in Korea was used. For the rainfall erosion factor to calculate and compare the area of islets, the actual observation data for one year before the observation of satellite image from all observatories across Korea was used. The correlation coefficient between RUSLE and area change of islets was 0.57 for Jinwoo Islet; 0.7 for Sinja Islet; 0.87 for Doyodeung. This results showed that there was a great influence from Doyodeung where the main water way of Nakdong River runs. This study showed that the study using USLE for various fields and through identifying the characteristics of each factor is useful to understand natural phenomenon in practice.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제37권3호
• /
• pp.541-547
• /
• 2017

In Yongwon channel, its natural flow of seawater is blocked by the construction of Busan Newport including the container berth. The channel was transformed into a narrow and long one, where it is possible that ships are only allowed to pass through the north-side channel of Gyeonmado located at the point of river mouth to Songjeongcheon. So it is considered that the changes in the terrain characteristics of Yongwon channel is likely to alter the circulation of sea water, thereby changing its water quality. Contaminants are accumulated from the sediment release. In this study, before and after dredging the sediment release test was performed. As a result, after the sediment dredging is performed, the reduction rate was higher at the same point. The results show that the water quality can be improved by dredging. Each group (A~C) reduction rate of the evaluation of the reduction rate of 4.64% T-N, 18.00%, 18.59%, respectively. T-P rate of 24.75% reduction, 24.17%, 44.08%, respectively. COD reduction rate was 18.57%, 19.76%, 38.08%, respectively. These results can be used as basic data for controlling the contamination by dredging in Yongwon channel.

• Journal of Distribution Science
• /
• 제11권2호
• /
• pp.57-70
• /
• 2013

Purpose - The objective of this paper is to explain the successful methods for the revitalization of distribution and logistics of the least developed FEZs (Saemangum, Yellow-sea, and Deagu-Kyengbuk) in Korea. With the recent changes in the economic terrain of Northeast Asia as with the rise of China, Korea has developed a logistics hub concept for improving the efficiency of logistics and distribution industry and its distribution and logistics policy has received positive worldwide evaluation. Therefore, we face severe competition and must always look for ways to address these problems. Research design, Data, Methodology - This study adopts two methods to propose successful revitalization of distribution and logistics in the least developed FEZ. The first method investigates the limitation of these FEZs by analyzing the statutes, and the second one follows comparable cases. Thus, we first reviewed the efficient strategic political alternatives for the least developed FEZ, Yellow-sea, Seamangum-Gunsan, and Deagu-Kyeongbuk, through the relative institution system, law, and future plans. Next, we studied the Bin-hai Economic Free Section (Zone) in China as a comparable example. In order to analyze the competitiveness of logistics in the three FEZs (Yellow-sea, Seamangum-Gunsan, and Deagu-Kyeongbuk), the total factor productivity growth of regional manufacturing industries is divided into three sources: the external trade effect, scale effect, and technical change effect. However, this paper does not test for a positive contribution of external trade, which is a reason of non-building on these FEZs. A FEZ that shows a larger external trade effect than the others will have a comparative advantage in the logistics infrastructure and policy support. This study presented the newly applied Bin-hai FEZ in China, in order to make the studied FEZ as successful by applying the strategy of its distribution and logistics center. Results - In Korea, there is an increased focus on the benefit of the regional development of regions such as the Free Economic Zones (FEZ). We have six FEZs, Inchon, Busan-Jinhae, Guangyang, Yellow-sea, Seamangum-Gunsan, and Deagu-Kyeongbuk. However, our FEZs do not have various supporting factors needed for the logistics and distribution industry. Korea designated the above six places as FEZ and has operated to enhance national competitiveness and ensure a balanced regional development since 2003. However, most FEZs did not receive favorable feedback in the first business performance evaluation and it is necessary to take action for substantial improvements. Conclusions - Especially, over the past 10 years, even though the FEZ policy has been implemented in an effort to promote success in distribution and logistics, there are still many underdeveloped industries in logistics. The main problem is the absence of revitalization of the high value added performance in the distribution and logistics industry. However, there is a limitation to this study. We have used non-empirical method based on a case study to arrive at our findings. Future studies should use appropriate statistical methods to supplement our results and provide a solution to this problem.

• Journal of Cadastre & Land InformatiX
• /
• 제48권1호
• /
• pp.111-121
• /
• 2018

RIn this research, digital elevation models, true-ortho image and 3-dimensional digital complied data was generated and evaluated using unmanned aircraft vehicle stereoscopic images by applying photogrammetric principles. In order to implement stereoscopic vision, digital Photogrammetric Workstation should be used necessarily. For conducting this, in this study GEOMAPPER 1.0 is used. That was developed by the Ministry of Trade, Industry and Energy. To realize stereoscopic vision using two overlapping images of the unmanned aerial vehicle, the interior and exterior orientation parameters should be calculated. Especially lens distortion of non-metric camera must be accurately compensated for stereoscope. In this work. photogrammetric orientation process was conducted using commercial Software, PhotoScan 1.4. Fixed wing KRobotics KD-2 was used for the acquisition of UAV images. True-ortho photo was generated and digital topographic map was partially produced. Finally, we presented error analysis on the generated digital complied map. As the results, it is confirmed that the production of digital terrain map with a scale 1:2,500~1:3,000 is available using stereoscope method.

• The Journal of Engineering Geology
• /
• 제14권4호
• /
• pp.443-450
• /
• 2004

This study developed a prediction model of debris flow to predict a landslide probability on natural terrain composed of the Tertiary sedimentary and volcanic rocks using a logistic regression analysis. The landslides data were collected around Pohang, Gyeongbuk province where more than 100 landslides were occurred in 1998. Considered with basic characteristics of the logistic regression analysis, field survey and laboratory soil tests were performed for both slided points and not-slided points. The final iufluential factors on landslides were selected as six factors by the logistic regression analysis. The six factors are composed of two topographic factors and four geologic factors. The developed landslide prediction model has more than $90\%$ of prediction accuracy. Therefore, it is possible to make probabilistic and quantitative prediction of landslide occurrence using the developed model in this study area as well as the previously developed model for metamorphic and granitic rocks.

• The Journal of Engineering Geology
• /
• 제26권3호
• /
• pp.413-422
• /
• 2016

With the rapidly increasing population density and development of infrastructure, the loss of life and property damage caused by landslides has increased gradually in urban area. Especially, Because Busan has high percentage of mountainous terrain among the metropolitan in Korea, it is unavoidable to develop mountainous region excessively. The objective of this evaluation is to study on landslide hazard possibility for Mt. Hwangryeong in Busan Metropolitan City using the infinite slope model considering the groundwater level. All data related to creating the thematic maps was carried out using ArcGIS 10.0. The results show that FS (Factor of Safety) for landslide is inversely proportional to groundwater level change as expected. Most area indicates stable state in dry condition, and unstable area increase due to high pore water pressure when the groundwater level rise. However, several places in high lineament density area where landslide has been previously occurred, are more stable than other places according to the analysis. This inconsistency between real situation and analysis results indicates that additional analytical method would be necessary to solve the problem. Therefore, we suggest that development of new infiltration theory for unsaturated zone would be helpful to evaluate groundwater level distribution as time goes by.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제29권6호
• /
• pp.569-576
• /
• 2011

Recently the establishment of high accuracy 3D spatial information has been largely stimulated according to the increase in need of such 3D spatial information. In the fields of constructions and civil works, studies on increasing the productivity in these fields through converging them with other fields using the established 3D spatial information have been conducted. In such a tendency, BIM (Building Information Modeling) technologies have been rapidly applied to the fields of constructions and civil works. In particular, in the fields of constructions and civil works that represent a life span of plan-design-construction-maintenance, some BIM application methods and plans for the characteristics in each step have been proposed. Thus, the objective of this study is to simulate a project that is reasonable and can be optimized in connection with 3D spatial information and BIM technologies escaped from the conventional civil construction process that is based on empirical, statistical DB, and 2D information. For achieving this objective, 3D terrain data for the subject area engaged in this study using aerial photographs and airborne LiDAR was established. Also, a counter plan for the issues, which cannot be solved in the conventional methods for managing civil work projects, is applied through implementing bridge-based civil structure BIM by combining them with objective information.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제27권4호
• /
• pp.421-428
• /
• 2009

In Korea, the change of river flux due to seasons change is so considerable because of the mountainous terrain with the sharp slope and leaned rainfall. This unfavorable natural condition and the difficulties in precise grasping of the river status made the water resource management difficult so that the necessity of the precise river management has been continuously increased. In this study, a precise river-region DEM using the latest equipments of ALS and MBES is constructed. After acquiring DEM from each senor on the river region, a single DEM was generated by combining them. Also, the field inspection was carried out in the overlapped region of ALS and MBES in order to verify the quality of DEM. The verification of DEM was carried out by comparison between TINs obtained from the combined result of ALS and MBES and the surveying result from total station at more than 10 points in the selected two test areas. As a result, NO.1-area's RMSE of 0.322m and 0.113m are obtained for NO. 1 and NO. 2 areas, respectively. The result of this study shows the feasibility of DEM construction for river region using ALS and MBES as seen in the case of NO. 2 area. At the same time, it was appeared that a better method on the data fusion should be developed as seen in the result of NO. 1 area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제28권3호
• /
• pp.317-328
• /
• 2010

This paper describes the results of complete Bouguer anomalies computed from the Free-air anomalies that derived from Sandwell and DNSC08 marine gravity models. Complete bouguer corrections consist of three parts: the bouguer correction (Bullard A), the curvature correction (Bullard B) and the terrain correction (Bullard C). These all corrections have been computed over the East Sea on a $1'{\times}1'$elevation data (topography and bathymetry) derived from ETOPO1 global relief model. In addition, a constant topographic (sea-water) density of $2,670kg/m^3$($1,030kg/m^3$) has been used for all correction terms. The distribution of complete bouguer anomalies computed from DNSC08 are -34.390 ~ 267.925 mGal, and those from Sandwell are -32.446 ~ 266.967 mGal in East Sea. The mean and RMSE value of the difference between DNSC08 and Sandwell is $0.036{\pm}2.373\;mGal$. The highest value of complete bouguer anomaly are found around the region of $42{\sim}43^{\circ}N$ and $137{\sim}139^{\circ}E$ (has the lowest bathymetry) in both models. These values show that the gravity distribution of both models, DNSC08 and Sandwell, are very similar. They indicate that satellite-based marine gravity model can be effectively used to analyze the geophysical, geological and geodetic characteristics in East Sea.

• Korean Journal of Remote Sensing
• /
• 제35권6_1호
• /
• pp.907-917
• /
• 2019

Recently, the demand for high-resolution satellite images increases in many fields such as land monitoring and terrain analysis. Therefore, the need for geometric correction is increasing. As an automatic precision geometric correction method, there is a method of automatically extracting the GCP by matching between the GCP Chip and the satellite image. For automatic precision geometric correction, the success rate of matching GCP Chip and satellite image is important. Therefore, it is important to evaluate the matching performance of the manufactured GCP Chip. In order to evaluate the matching performance of GCP Chips, a total of 3,812 GCP Chips in South Korea were used as experimental data. The GCP Chip matching results of KOMPSAT-3A and Google Map showed similar matching results. Therefore, we determined that Google Map satellite imagery could replace high-resolution satellite imagery. Also, presented a method using center point and error radius of Google Map to reduce the time required to verify matching performance. As a result, it is best to set the optimum error radius to 8.5m. Evaluated the matching performance of GCP Chips in South Korea using Google Maps. And verified matching result using presented method. As a result, the GCP Chip s in South Korea had a matching success rate of about 94%. Also, the main matching failure factors were analyzed by matching failure GCP Chips. As a result, Except for GCP Chips that need to be remanufactured, the remaining GCP Chips can be used for the automatic geometric correction of satellite images.