• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.432-439
• /
• 2020

To improve the relatively low economic efficiency of the Korean native pig, the Korean National Institute of Animal Science developed a novel pig breed, the Woori black pig (W), by crossing Korean native and Duroc (D) pigs. This study was conducted to evaluate the effects of W as a terminal sire on growth performance, body shape, and retail cut yield of crossbred pigs. By using a completely randomized design, 32 crossbred pigs were allotted to one of two treatment groups based on terminal sire. The two groups were LYD [(Landrace × Yorkshire) × D sire] and LYW [(Landrace × Yorkshire) × W sire]. The experimental assessments were conducted over 53 days. The terminal sire breed had no significant effect on body weight (BW) at d 53, or on BW gain, average daily gain, or days to reach a 90 kg body weight. Moreover, there were no significant differences in body length, body height, or chest depth between the two groups. However, there was a significant difference (p < 0.05) in backfat thickness between the LYD (17.29 mm) and LYW (18.96 mm) groups. Loin yield of crossbred pigs in the LYW group (13.11%) was significantly lower (p < 0.05) than that in the LYD group (13.85%). By contrast, the Boston butt yield was significantly higher (p < 0.05) in the LYW group (8.99%) than in the LYD group (8.21%). In conclusion, these results suggest crossbred pigs sired by a Woori black pig had growth performance, shape, and retail cut yield (except loin yield) Ed. Note: I assume the lower loin yield is a negative factor so I included this wording. similar to those sired by a Duroc pig. The results showed no overall negative effect Ed. Note: I assume the lower loin yield is a negative factor so I used this wording. on crossbred offspring, indicating the suitability of the Woori black pig as a terminal sire.

• Journal of Animal Science and Technology
• /
• v.49 no.1
• /
• pp.9-14
• /
• 2007

Data of 369 commercial pigs produced from YorkshrexLancrace (YL F1) sows crossed with either Duroc (D), Berkshire (B) or BerkshirexDuroc(BD F1) as a terminal sire were used for the comparison of carcass garde and real retail cut yield. The crosses were performed between May, 2004 and May, 2006 at three interrlated farms belonging to the Gyeongam pork brand. The average carcass weight, carcass backfat thickness, carcass rate, AB grade ratio, lean meat yield were 84.78±0.33kg, 20.72±0.237mm, 76.25±0.208%, 85.7% and 44.30±0.158%, respectively. The average weights of real retail cut were 10.32±0.062kg belly, 4.17±0.025kg boston butt, 3.88±0.022kg rib, 8.40±0.040kg picnic, 15.15±0.081kg ham, 6.44±0.043kg loin and 0.94±0.006kg tender loin. In comparisons of carcass traits among cross types, carcass weights and backfat thicknesses of YL(♀)×B(♂), YL(♀)×BD(♂) and YL(♀)×D(♂) were 85.73±0.516kg, 82.69±0.788kg and 84.79±0.603kg, respectively and 22.09±0.356mm, 20.33±0.543mm and 19.58±0.415mm, respectively. The YL(♀)×B(♂) cross showed the highest carcass weight and backfat thickness. The ratio of AB grade were 0.83±0.030% in YL(♀)×B(♂), 0.97±0.046% in YL(♀)×BD(♂) and 0.83±0.035% in YL(♀)×D(♂), and the YL(♀)×BD(♂) was higher than other two crosses. Weights of belly were 10.28±0.092kg in YL(♀)×B(♂), 10.59±0.133kg in YL(♀)×BD(♂) and 10.25±0.107kg in YL(♀)×D(♂). Consequently, the YL(♀)×BD(♂) cross showed the highest yield. In conclusion, there was no difference in carcass yield of commercial pigs derived from BD (F1) terminal sires with those from D terminal sires. However, weight of belly and AB grade ratio from BD (F1) terminal sires are higher than two others. Therefore, BD (F1) sire could be utilized as terminal one and contribute better profit for the pig industry.

• Journal of Animal Science and Technology
• /
• v.49 no.2
• /
• pp.161-170
• /
• 2007

A submerged biofilm sequencing batch reactor (SBSBR) process, which liquor was internally circulated through sandfilter, was designed, and performances in swine wastewater treatment was evaluated under a condition of no external carbon source addition. Denitrification of NOx-N with loading rate in vertical and slope type of sandfilter was 19% and 3.8%, respectively, showing approximately 5 times difference, and so vertical type sandfilter was chosen for the combination with SBSBR. When the process was operated under 15 days HRT, 105L/hr.m3 of internal circulation rate and 54g/m3.d of NH4-N loading rate, treatment efficiencies of STOC, NH4-N and TN (as NH4-N plus NOx-N) was 75%, 97% and 85%, respectively. By conducting internal circulation through sandfilter, removal performances of TN were enhanced by 14%, and the elevation of nitrogen removal was mainly attributed to occurrence of denitrification in sandfilter. Also, approximately 57% of phosphorus was removed with the conduction of internal circulation through sandfilter, meanwhile phosphorus concentration in final effluent rather increased when the internal circulation was not performed. Therefore, It was quite sure that the continuous internal circulation of liquor through sandfilter could contribute to enhancement of biological nutrient removal. Under 60g/m3.d of NH4-N loading rate, the NH4-N level in final effluent was relatively low and constant(below 20mg/L) and over 80% of nitrogen removal was maintained in spite of loading rate increase up to 100g/m3.d. However, the treatment efficiency of nitrogen was deteriorated with further increase of loading rate. Based on this result, an optimum loading rate of nitrogen for the process would be 100g/m3.d.

• Journal of Animal Science and Technology
• /
• v.49 no.2
• /
• pp.171-176
• /
• 2007

A total of 4,627 records on pre-weaning growth traits, birth weight(BW), weaning weight(WW) and pre-weaning daily gain(ADG) of Hanwoo’s born form 1970 to 2005 were collected from Hanwoo Experiment Station, National Livestock Research Institute. Variance components and heritabilities of BW, WW and ADG were estimated with two models; Model 1 included only direct genetic effect while Mode1 2 included direct genetic, maternal genetic and permanent environmental effects. Direct herit- ability estimates of BW, WW and ADG estimated by model 1 were 0.34, 0.26 and 0.20, respectively. In model 2, direct heritability and maternal genetic heritability estimates were 0.14 and 0.06 for BW, 0.07 and 0.04 for WW and 0.05 and 0.04 for ADG. Estimates of genetic correlation between direct and maternal effect for BW, WW and ADG were 0.58, 0.75 and 0.61, respectively. Genetic correlation coefficients between BW and WW, between BW and ADG, and between WW and ADG were 0.76, 0.62 and 0.99, respectively.

• Food Science of Animal Resources
• /
• v.27 no.3
• /
• pp.382-386
• /
• 2007

The association between the promoter region genotypes of the porcine adipocyte fatty acid binding protein (A-FABP) gene and carcass traits in commercial pigs was examined. Interestingly, only two different genotypes (-406T/T and T/C) for the A-FABP gene were detected using Hinf-RFLP for the substitution mutation T-406C in the A-FABP promoter in commercial pigs, and no -406C/C homozygotes were detected. The reason for the lack of the -406 C/C genotype is due to the breeding system in which only Duroc, which has a high frequency of -406C/- in this locus among the three breeds involved in commercial pig production, is typically used as a terminal sire. The pigs containing the genotype -406C/- were significantly associated with an increase in intramuscula. fat content and carcass weight (p<0.05), but there was no association with the other carcass traits tested (fat composition, color score, texture score, moisture, and separation score between muscles). This study suggests that the -406C/- genotype of the porcine A-FABP gene may not only be a useful molecular marker for intramuscular fat, but may also contribute to the improvement of meat quality by the production of well-marbled pigs by breeding animals containing this genotype, especially Duroc, as a terminal sire for commercial pigs.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.5
• /
• pp.493-500
• /
• 2008

This paper describes a design of internal frequency modulation(FM) radio antenna fur mobile terminal. In order to control of impedance at an operating frequency of the designed antenna, the lumped constant elements of R and L chip components are used. Patch and stubs located at antenna backside are added to control an exact resonance frequency and miniaturization. A fabricated antenna sire, the measured return loss, impedance, bandwidth, and gain are $40{\times}70{\times}1$ mm, -23 dB at 99 MHz, $55-j7{\Omega}$, 22 MHz($88{\sim}110$ MHz) below -10 dB, and -15 dBi, respectively. These measured results show a good agreement with simulated results. Especially, the measured gain of fabricated antenna is similar with value of a conventional ear-phone antenna in the designed frequency band. The measured radiation pattern agrees well with the calculated omni-directional pattern.

• Food Science of Animal Resources
• /
• v.33 no.1
• /
• pp.125-132
• /
• 2013

In the present study, to determine the effects of terminal sire strains, carcass characteristics, yields of retail cut, and meat quality of 425 pigs were examined. Terminal sires were divided into five strains (D1, D2, B1, B2, and BD) based on the countries of origin and breeds. The strains D1 and D2 showed high grade 1+ appearance ratios and strains B1, B2, and D1 showed high appearance ratios of carcass yield grade A. As for the real retail cut yields of meat, strain D1 showed large real retail cut yields of meat in shoulder, rib, fore leg, loin, belly, tenderloin and hind leg. Moisture contents were significantly higher in strain B1, and protein and fat contents were significantly higher for strain D1 than in the other strains (p<0.05). Shear force values were significantly higher for strain B1 than in the other strains (p<0.05). For meat color properties, the lightness were significantly higher in strains D1, D2, and BD, and the yellowness were significantly higher in strains D1, D2, and BD relative to the other strains (p<0.05). In sensory evaluation, drip of strains D1 and D2 were significantly lower while marbling and overall acceptability were significantly higher in the other four strains (p<0.05). Therefore, when considering the results of the present study comprehensively, using strains D1 and D2 that showed high grade 1+ appearance ratios, large real retail cut yields of belly, significantly higher lightness and sensory evaluation will be helpful to the incomes of producers and farm households.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.2
• /
• pp.244-252
• /
• 1999

Intensive selection for muscle development and against fat deposition in pigs during the last 50 years has contributed to the increased incidence of porcine stress syndrome (PSS) and pale soft exudative pork (PSE). Genetics, nutrition and management, preslaughter animal handling, stunning, dehairing and carcass chilling influence the incidence and magnitude of the PSE condition. The normal incidence of PSE has been reported to range from 10 to 30%, but in some isolated instances is up to 60%. The elimination of halothane-positive pigs in breeding programs has reduced PSS and PSE. Further improvements in meat quality by terminal sire evaluation and selection can be achieved within halothane-negative populations because around 20% of the variation in meat color and water binding capacity seems to be genetically related. Pre-slaughter handling on the farm, during transit to the packing plant and at the packing plant can greatly influence the meat quality, contributing 10 to 25% of the variation. An effective stunning method, skinning instead of scalding/dehairing and rapid post-slaughter chilling further reduce the incidence of PSE pork. In addition to proper care and handling a carcass-merit based marketing system, that reflected the value differential between desirable and undesirable meat quality in the pricing system for pigs, would provide a great incentive to change pork production systems in order to improve meat quality, thus improving the image and usefulness of pork as food.

• Food Science of Animal Resources
• /
• v.38 no.3
• /
• pp.544-553
• /
• 2018

This study was conducted to determine the effects of breed and sex on meat quality and sensory properties of the loin in three-way crossbred pigs: $Landrace{\times}Yorkshire{\times}Duroc$ (LYD) and $Landrace{\times}Yorkshire{\times}Woori$ (LYW) black pig synthesized by Korean native breed. Carcass traits did not differ by breed. Carcass weight and backfat thickness were higher in castrates than in gilts (p<0.01). LYW showed significant high values in fat content, cooking loss, and water-holding capacity (WHC) than LYD (p<0.05). Redness and yellowness of the meat were higher in LYW than in LYD (p<0.01). Further, LYW had lower pH and shear force than LYD (p<0.001). Significant high scores in color and flavor were obtained in LYW or gilts compared to LYD or castrates by sensory panel, respectively (p<0.05). However, other sensory traits did not differ by breed or sex. Capric acid (C10:0) was higher in LYD than LYW (p<0.001). However, stearic acid (C18:0) and saturated fatty acid (SFA) contents were higher in LYW than LYD (p<0.05). Eicosenoic acid (C20:2) and the n6/n3 ratio were higher in gilts than in castrates, whereas SFA content was higher in castrates than in gilts. These results suggest that certain physicochemical qualities of meat and sensory properties are improved in LYW compared to LYD. This study could provide basic data on meat quality of crossbred pigs with Woori black pig as a terminal sire.

• Journal of Animal Science and Technology
• /
• v.48 no.4
• /
• pp.493-502
• /
• 2006

The slaughter weight (wt) is a most important economic factor in swine roduction. The present study was undertaken to determine if it is feasible to increase the slaughter wt of finishing pigs to 130kg without significantly affecting the growth efficiency and carcass quality. One hundred and sixty gilts and 160 barrows born from lean-type Yorkshire×Landrace (YL)-dam and Duroc (D)-sire lines, which are most widely used for terminal breeding for pork production in Gyeongsangnam-do, were randomly allocated into 16 pens under a 2 (sex)×2 (slaughter wt; 110 vs. 130kg) factorial arrangement of treatments. The animals were fed ad libitum a diet containing 3,200kcal DE/kg and 15.5% crude protein. After slaughter at the predetermined wt, yields of trimmed primal cuts and physicochemical characteristics of the longissimus dorsi muscle (LD) were measured or analyzed. Average daily gain was greater (P<0.01) in barrows than in gilts (0.86 vs. 0.79kg), but it was not different between the 110- and 130-kg slaughter wt groups (P>0.05). Backfat thickness was greater in the 130- vs. 110-kg group in both sexes (gilts: 21.6 vs. 17.6 mm, barrows: 25.1 vs. 20.8 mm). The yield percentage of belly was greater in barrows than in gilts (21.2 vs. 20.5%) and also in the 130-kg vs. 110-kg group (21.4 vs. 20.2%). Major physicochemical characteristics of LD including the color, percentage of 48-h drip loss, 24-h pH and percentages of crude protein and fat were not influenced by slaughter wt. Marginal profit of the 130-kg vs. 110-kg market pig was approximately 󰠏20,000 won/head, which resulted primarily from the heavy carcass weight of the former exceeding the upper limit of the A- or B-grade. However, if it had not been for the carcass weight limit of the current grading system, a 130-kg market pig would have had a potential marginal profit greater than 20,000 won. Results suggest that slaughter wt of lean-line finishing pigs can be increased to 130kg without significantly compromising the growth efficiency and carcass quality and accordingly, the upper weight limit of the ‘good-grade’ carcass needs to be increased or abolished to accommodate the larger market pigs.