• Bulletin of the Korean Chemical Society
• /
• 제23권1호
• /
• pp.59-64
• /
• 2002

A facile and precise batch oxidation reaction system allows continuous monitoring of the oxidation rate and cumulated oxygen conversion of xylenes, and the side reactions to carbon monoxide and carbon dioxide may also be studied. The oxidation reaction can be analyzed precisely with the rate and amount of oxygen consumed. The reaction reveals that 4-carboxybenzaldehyde is an unstable intermediate of p-xylene oxidation as the reaction proceeds instantaneously from p-toluic acid to TPA (terephthalic acid). The alkali metals accelerate oxidation, even though they retard the reaction initially. The oxidation rate increases with decreasing water concentration. However, in the later part of reaction, the reactivity decreases a bit if the water concentration is very low. This retarding effect of water can be overcome partly by the addition of potassium. The oxidation of o-xylene, compared with the oxidation of p-xylene and m-xylene, proceeds quite fast initially, however, the oxidation rate of xylene isomers in the later stage of reaction is in the order of p-xylene > mxylene > o-xylene.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.351-354
• /
• 2001

Poly(ethylene terephthalate) (PET)는 물리적, 기계적 성질이 우수한 엔지니어링 플라스틱의 하나로 섬유, 필름, 및 여러 가지 용도로 다양하게 사용되고 있다. PET는 DMT(dimethyl terephthalate) 또는 TPA(terephthalic acid)와 EG(ethylene glycol)를 축합 중합하여 제조한다. (중략)

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.1041-1042
• /
• 2010

• Korean Chemical Engineering Research
• /
• 제59권1호
• /
• pp.152-152
• /
• 2021

• 폴리머
• /
• 제35권2호
• /
• pp.176-182
• /
• 2011

방향족 액정 폴리에스테르는 열방성 액정 중합체의 대표저인 예로 지금까지 구조-물성 관계가 많이 연구되었다. 본 연구에서는 유기 용매에 녹일 수 있는 가용성 방향족 액정 폴리에스테르를 합성하고, 아세틸렌 말단기를 갖는 열경화성 수지와 복합화하여 제반 물성을 비교하였다. 가용성 방향족 액정 폴리에스테르는 6-hydroxy-2-naphthoic acid, terephthalic acid, isophthalic acid 및 4-aminophenol을 단량체로 하여 에스테르 및 아미드 교환 반응에 기초로 한 축합 중합법을 이용하여 합성하였다. 아세틸렌 말단기를 갖는 열경화성 수지는 4-ethynylaniline과 terephthaloyl dichloride, isophthaloyl clichloride, 4,4'-biphenyldicarbonyl dichloride 등과 각각 반응시켜 합성하였다. 가용성 방향족 액정 폴리에스테르와 열경화성 수지를 용액 블렌딩하고 열처리하여 복합체를 제조하였으며, 복합체의 열적 안정성, 열팽창계수, 유전특성 등을 조사하였다.

• 한국환경보건학회지
• /
• 제23권3호
• /
• pp.85-90
• /
• 1997

The objective of this study was to investigate biodegradation of TPA(terephthalic acid) and EG (ethylene glycol), treatment efficiency of polyester weight loss wastewater and microbial characteristics by aerated submerged biolfilm(ASB) p.rocess. In a batch reactor, pH increased from 7.0 to 8. 5 in the biodegradation of TPA. Whereas, in case of EG, decreased from 7.0 to 5.2. COD concentration rapidly decreased within 24hr in the biodegradation of TPA and EG. COD removal velocity constant(k) were 0.065-0.088 hr$^{-1}$. The biodegradation velocity of TPA was 1.4 times faster than that of EG. The ratio of suspended biomass to the total biomass in the reactor was 18.3-33.3%, increased as a high ratio of EG content. Biofilm thickness, biofilm dry density and attached biomass were 346-432 $\mu$m, 41.8-61.9 mg/cm$^3$, 1.45-2.67 mg/cm$^2$, respectively. There values increased as a high ratio of TPA content. In the hydraulic retention time of 36 hr, organic loading rate of 4 kgCOD/m$^3\cdot$ day and packing ratio of 70%, the effluent concentrations of TCOD, SCOD in a continuous flow reator were 1,388 mg/l, 147 mg/l and removal efficiencies were 77%, 97.6%, respectively.

• 한국물환경학회지
• /
• 제20권5호
• /
• pp.452-456
• /
• 2004

Gamma-rays effectively decomposed TPA and EG, thus removal of $1.0{\times}10^{-3}$ M pollutants was near 65 and 95%, respectively, at an absorbed dose of 10 kGy. However, TOC removal in the radiation treatment was less than 5% due to a low transformation of both TPA and EG to $CO_2$. For TPA, gamma-ray treatment largely reduced biodegradability($BOD_5/COD$) by degrading TPA to non-biodegradable organic acids. This implies that the change of biodegradability should be considered when the radiation treatment is combined with conventional biological techniques. A weight-loss wastewater containing TPA and EG was also purified by gamma-ray treatment. Extraordinarily, biodegradability of the wastewater was increased at a low dose of 1 kGy. Though underlying mechanism was not clearly identified, this result stresses the effect of wastewater composition and absorbed dose on the biodegradability change.

• 폴리머
• /
• 제25권2호
• /
• pp.208-217
• /
• 2001

테레프탈산 (terephthalic acid), 비스페놀에이 (bisphenol-A)와 에틸렌글리콜 (ethyleneglycol)로 제조된 PET/BPA 공중합체를 용융 압축시켜 필름을 만들어 얼음물에 급냉시켰다. 이 공중합체 필름을 모세관 레오메타로 고상 압출시켜 연신 필름을 만들었다. 이 연신된 필름의 수축율, 결정성, 형태학, 열적, 동역학적 및 기계적 특성을 조사하였다. 공중합체 필름의 융점은 순수 폴리에틸렌테레프탈레이트(PET)보다 낮게 나타났다. 또한 결정화도와 밀도는 연신비와 연신속도의 증가와 더불어 증가하였으나, 연신온도 증가와 더불어 감소하였다. 공중합체 필름의 인장강도와 인장탄성률은 연신비 증가와 더불어 증가하였고, 연신온도 증가에 따라 감소하였다. 연신된 공중합체 필름의 수축율은 연신비와 연신속도가 증가할수록 감소하였다.

• 폴리머
• /
• 제39권2호
• /
• pp.287-292
• /
• 2015

다양한 함량의 테레프탈산, 에틸렌글리콜, 1,4-싸이클로헥산 디메탄올, 이소소바이드로 구성된 일련의 바이오 기반 삼원 공중합체들의 특성을 $^1H$ NMR과 $^{13}C$ NMR을 이용하여 연구하였다. NMR 분석 결과 모두 랜덤한 미세 구조를 가졌고 시퀀스 분포는 이소소바이드의 함량에 따라 영향을 받았다. 시차주사열량계(DSC) 데이터로부터 유리전이온도는 주로 이소소바이드 함량이 증가함에 따라 증가하는 것을 알 수 있었다. 또한 확장된 Fox 식을 이용하여 각 성분의 함량에 따른 삼원공중합체의 유리전이 온도를 예측하고자 하였다.

• Korean Chemical Engineering Research
• /
• 제61권2호
• /
• pp.322-327
• /
• 2023

A design of experiments was evaluated in optimizing MOF-5 synthesis for acetylene adsorption. At first, mixture design was used to optimize precursor concentration, terephthalic acid, zinc acetate dihydrate and N,N-dimethylformamide. More specifically, 13 conditions with various molar ratios were designed by extreme vertices design method. After preparing the samples, XRD, N₂ physisorption and SEM analysis were performed for their characterization. Moreover, acetylene adsorption experiments were carried out over the samples under identical conditions. The optimal precursor composition for MOF-5 synthesis was predicted on a molar basis as follows: terephthalic acid : acetate dihydrate : dimethylformamide = 0.1 : 0.4 : 0.5. Thereafter, multi-level factorial design was designated to investigate the effect of synthesis reaction conditions such as temperature, time and stirring speed. By the statistical analysis of 18 samples designed, 4 reaction parameters were determined for additional adsorption experiments. Therefore, MOF-5 prepared under the synthesis time and temperature of 100 ℃ and 12 h, respectively, showed the maximum adsorption capacity of 15.1 mmol/g.