• 대한의용생체공학회:의공학회지
• /
• 제19권5호
• /
• pp.495-502
• /
• 1998

Y.C. Fung[1]에 의한 연조직의 점탄성에 관한 수학적 모델이론 (Fung's Quasi-linear vlscoelastic theory)을 이용하여 인간의 인두조직의 점탄성(vlscoelatlcity)특성을 측정하기 위하여 반복성하중(cyclic load) ,응력완화 (tensile stress relaxation), incremental load, 그리고 일축성인장 (uniaxial tensile) 시험 등을 실시하였다. 실험적으로 측정한 인두조직의 점탄성특성이 이미 조사된 다른 조직의 점탄성특성과 정량적으로 비교되었다. 인두조직의 점탄성특성의 정량화를 위하여 Y.C.Fung의 수학적 모델이 적용되었는데 응력완화(tensile stress relaxation) 시험 측정결과로부터 도출된 표준화된 응력완화(reduced stress relaxation)함수 G(t)와 일축성인장(uniaxial tensile)시험에서 도출된 탄성반응(elastic response)함수 5(t)를 이용하여 시간에 따른 응력의 궤적을 산출하여 이를 반복성 하중(cyclic load)실험에서 측정된 결과와 비교, 분석하였다. 이러한 인두조직의 점탄성특성에 관한 연구결과는 향후 유한요소를 이용한 인두의 생체역학적 모델의 기본 데이터로 이용될 수 있다.

• 한국세라믹학회지
• /
• 제32권7호
• /
• pp.793-798
• /
• 1995

The relaxation of the intrinsic stresses in the diamond films fabricated by the hot filament CVD was studied, and it was confirmed that the tensile intrinsic stresses in the films could be controlled without any degradation in the quality of the diamond films. The tensile intrinsic stresses in the films decreased from 2.97 to 1.42 GPa when the substrate thickness increased from 1 to 10mm. This result showed that the residual stress was affected by the substrate thickness as well as by the interaction between grains. Applying of ＋50 V between the W filament and the Si substrate during deposition, the tensile intrinsic stress in the film deposited at 0 V was decreased from 2.40 GPa to 0.71 GPa. Such large decrease in the tensile intrinsic stress was due to $\beta$-SiC which acted as a buffer layer for the stress relaxation. However, the application of the large voltage above ＋200V resulted in the change of quality of the diamond film, and nearly had no effect on relaxation in the tensile intrinsic stress.

• Journal of the Korean Wood Science and Technology
• /
• 제26권4호
• /
• pp.13-19
• /
• 1998

Stress relaxation tests have been performed under five different tensile strain levels and five different bending strain levels. Three different theoretical models have been developed based on four-element Burger's model, viscoelastic theory and viscous-viscoelastic theory. Experimental data were used to obtain parameters of the models and to verify accuracy of the models. Among the three theoretical models developed in this study, three-integral model (Model 3) based on viscous-viscoelastic theory showed the most exact estimations of stress relaxation under both tensile and bending strains and their correlation coefficients were greater than 0.99 for all the strain levels. Model 1 showed little initial stress relaxation. Model 2 showed excessive initial relaxation and, then, no relaxation after about 20 minute of strain application. Stress retention under strain decreased as strain increased, which means increased stress relaxation as strain increases. When the strain level was less than proportional limit, the effect of strain level on stress relaxation was not clearly shown. However, this effect was increased as strain level increased when strain level was greater than proportional limit.

• Elastomers and Composites
• /
• 제45권4호
• /
• pp.250-255
• /
• 2010

비뉴톤 점탄성 Maxwell 요소와 탄성 스프링으로 이루어진 3 요소 비뉴톤 모델로부터 응력완화 식을 유도하였다. 이 식을 응력완화 실험 결과에 적용하여 여러 가지 모델 파라메타를 계산하였다. 모델 파라메타로부터 계산한 이론 곡선은 실험적인 응력완화 곡선과 잘 일치하였다. 비선형 점탄성 모델 파라메타로부터 섬유고분자 물질의 홀부피, 미세구조, 점탄성성질, 역학적인 성질 등을 연구하였다. 응력완화 실험은 용매기를 부착한 인장 시험기를 사용하였으며, 시료는 두 종류의 polyacrylonitrile-polyvinylchloride 공중합체와 또 다른 두 종류의 PVC 모노 필라멘트 섬유를 여러 온도의 공기와 물속에서 응력완화 실험을 하였다.

• Elastomers and Composites
• /
• 제47권3호
• /
• pp.223-230
• /
• 2012

응력완화 실험 곡선을 Eyring-Halsey 비뉴톤 모델의 이론식에 적용하여 poly(methyl acrylate)-poly(acrylonitrile) 공중합체의 유변학적 파라메타를 얻었다. 응력완화 실험은 용매기를 부착한 인장 시험기를 사용하였다. 유동 파라메타를 컴퓨터 프로그램을 이용하여 계산하였다. 이들 시료의 유동 파라메타는 유동 단위의 자체확산, 유동점성, 유동 활성화 에너지와 직접적인 연관을 갖는 것으로 규명되었다.

• Structural Engineering and Mechanics
• /
• 제22권5호
• /
• pp.563-574
• /
• 2006

This paper studies mechanical behavior of the superelastic shape memory alloy (SMA) rods in terms of local deformations and time via tensile loading-unloading cycles for both ends fixed end constraints. Besides the unique stress induced martensitic transformation (SIMT), SMA's time dependent behavior when it is in mixed-phase condition upon loading and unloading, also need careful attention with a view of investigating the local deformation of the structural elements made of the same material. With this perspective, the so-called stress-relaxation tests have been performed to demonstrate and investigate the local strains-total strains relationships with time, particularly, during the forward SIMT. Some remarkable phenomena have been observed pertaining to SIMT, which are absent in traditional materials and those unique phenomena have been explained qualitatively. For example, at the stopped loading conditions the two ends (fixed end and moving end of the tensile testing machine) were in fixed positions. So that there was no axial overall deformation of the specimen but some notable increase in the axial local deformation was shown by the extensometer placed at the middle of the SMA specimen. It should be noted that this peculiar behavior termed as 'inertia driven SIMT' occurs only when the loading was stopped at mixed phase condition. Besides this relaxation test for the SMA specimens, the same is performed for the mild steel (MS) specimens under similar test conditions. The MS specimens, however, show no unusual increase of local strains during the stress relaxation tests.

• 한국공간구조학회논문집
• /
• 제16권1호
• /
• pp.35-42
• /
• 2016

Until recently, almost all ETFE film structures that have been erected is the cushion type because there are problems at lower allowable strength under elastic range and viscosity behaviour such as creep and relaxation of ETFE films under long-term stresses. But the number of tension type structures is currently increasing. This paper proposes the stretch fabrication of ETFE film to verify the applicability of ETFE films to tensile membrane structures. First of all, to investigate the possibility of application on tensile membrane structures, the stretch fabrication test is carried out, and it is verified that it is possible to increase the yield strength of the film membrane structures. After simulating the experiment also carries out an analytical investigation, and the effectiveness of the elasto-plastic analysis considering the viscous behavior of the film is investigated. Finally, post-aging tension measurement is conducted at the experimental facilities, and the viscosity behavior resulting from relaxation is investigated with respect to tensile membrane structures.

• Elastomers and Composites
• /
• 제46권3호
• /
• pp.245-250
• /
• 2011

Poly(acrylonitrile)-poly(vinyl chloride) 공중합체 섬유의 비결정성 영역에서의 자체 확산 계수와 홀 부피를 응력완화 실험으로 규명하였다. 응력완화 실험은 용매기를 부착한 인장 시험기를 사용하였다. 이론적인 응력완화식 에 응력완화 실험 결과를 적용하여 여러 가지 유동 파라메타를 계산하였다. 유동 파라메타로부터 섬유고분자 물질의 홀부피, 자체확산, 점성, 열역학파라메타 등을 계산하였다. 이들 시료의 유동 파라메타는 유동 단위의 홀 부피, 자체확 산, 유동 활성화 에너지와 직접적인 연관을 갖는 것으로 규명되었다.

• 폴리머
• /
• 제35권3호
• /
• pp.232-237
• /
• 2011

Polyacrylonitrile-poly (vinyl chloride) 공중합체의 완화스펙트럼을 이론적인 완화스펙트럼 식에 실험적인 응력완화 곡선을 대입하여 계산하였다. 이론적인 완화스펙트럼 식은 Ree-Eyring and Maxwell 모델로부터 유도하였다. 응력완화 실험은 용매기를 부착한 인장 시험기를 사용하였다. 완화스펙트럼의 계산은 컴퓨터 프로그램을 이용하였으며, 완화스펙트럼으로부터 고체 고분자의 미세구조, 점탄성적인 성실, 홀 부피가 연구되었다. 또한 이들 시료의 완화스펙트럼은 유동단위의 분자량과 자체확산 분포와 밀접한 관계가 있음을 알 수 있었다.

• Food Science and Biotechnology
• /
• 제18권4호
• /
• pp.1013-1018
• /
• 2009

Several rheological terms were introduced to estimate the properties of cooked noodles with different starch content using tensile tests. Ring-shaped specimens were prepared by connecting both ends of the noodle strip before cooking. Hencky strain and rate, as well as true stress were applied in constant deformation tests. The elastic region on the curves of strain vs. stress was not clearly identified. Strain hardening in the subsequent plastic region was more prominent in low-starch noodles. Elongational viscosities at lower strain rates were used to differentiate noodles with different starch content, representing the dominant effect of protein content in the range of lower strain rates. In stress relaxation tests, the reciprocal of Peleg's constant $K_1$ (initial decay rate) and $K_2$ (asymptotic level) increased and decreased respectively, with an increase in starch content. This indicated that addition of starch contributed to the noodles becoming viscous liquid rather than elastic solid.