• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.349-352
• /
• 2006

Pull-off test is generally used as a method of evaluating bond strength of FRP with concrete at the job site. However, pull-off test damages FRP composites and the maximum pull-off strength is limited up to tensile strength of concrete. Accordingly, it is required to set-up a test method that can simply evaluate bond performance of structural adhesive. This study suggested compression and bending test of epoxy resin as test methods that can indirectly evaluate performance of adhesive, as well as standardized test specification for different types of specifications from various countries. In this study, the section dimension of compression and bending test specimens is unified, and standard test specimen size is achieved by test results.

• 대한치과의사협회지
• /
• 제51권1호
• /
• pp.6-11
• /
• 2013

Dental ceramics is well known to have excellent esthetics, biocompatibility as well as high compressive strength. However, the fragility of ceramics against tensile and shear loads leading to the delayed fracture of micro crack on ceramic surface and the backwardness of ceramic fabrication technique limit the usage of ceramic materials in dentistry. Among all ceramic materials, zirconia has been introduced to overcome the drawback of conventional dental ceramics in the field of dentistry due to the nature of zirconia featuring proper opalescence and high fracture toughness. Also, novel manufacturing techniques enable ceramic materials to prepare high esthetic anterior and posterior all ceramic system. In this paper, it is introduced and discussed that novel techniques characterizing the bond strength between zirconia core and veneering ceramics and analyzing the fluorescence of dental ceramics in order to overcome the gap between the results of basic research and the feasibility of the results in the field of dental clinics.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.75-76
• /
• 2020

In this study, in order to check whether the adhesion strength can be secured when installing concrete by mixing super-retarding agents, the splitting tensile strength of the joints of each mold was measured and then analyzed. The results of the experiment showed that the bonding performance of the joint is adversely affected if the installation delay is delayed for more than 24 hours, and that the attachment performance can be secured if the installation is delayed within about 24 hours.

• 대한치과교정학회지
• /
• 제40권4호
• /
• pp.260-266
• /
• 2010

본 연구의 목적은 서로 다른 종류의 접착시스템과 법랑질 보호제 등이 설측 브라켓의 인장강도에 영향을 미치는지 알아보는데 있다. 75개의 발치된 하악 전치를 5개의 그룹으로 임의로 나눈 후 설측 브라켓을 부착하였다. Group 1은 Transbond XT를, Group 2는 Transbond XT와 함께 불소 유리레진(Ortho-coat)을 Group 3는 Transbond XT와 Chlorohexidine varnish (Cervitec Plus)를 Group 4는 광중합 접착제(Aegis Ortho)를 Group 5는 antimicrobial self-etching primer (Clearfil Protect Bond)을 사용하였다. 불소유리 레진이나 Chlorohexidine varnish의 사용유무는 접착력에 영향을 미치지 못하였다. Group 5이 다른 그룹에 비해 접착력과 접착제 잔류지수(adhesive remnant index, ARI)가 통계적으로 유의하게 높았다 (p < 0.001). 법랑질 보호제 적용 시 설측 브라켓의 접착력에 부정적인 영향을 미치지 못하였다. 이상의 결과로 이번에 사용한 제품들은 설측 교정치료 기간 동안 환자의 구강위생을 개선시킬 수 있어 환자와 술자에게 도움을 줄 수 있을 것이다. 그러나 에나멜 층이 얇은 경우 Clearfil Protect Bond의 과도한 접착강도에 대해 고려해야 할 것이다.

• 콘크리트학회논문집
• /
• 제25권1호
• /
• pp.37-43
• /
• 2013

최근 FRP 판을 이용한 표면매입 보강공법에서 FRP와 콘크리트 사이의 계면파괴를 연구하기 위한 실험 및 이론적인 연구가 국내외에서 수행되고 있다. 그 결과 보강재의 형상과 콘크리트 강도 그리고 부착길이 등에 대한 일련의 연구가 수행되었지만, 보강재의 부착길이에 따른 각 보강재의 적정 간격, 그리고 무리효과 등과 같은 영향인자들에 대한 연구 필요성이 제기되고 있다. 이에 따라 이 연구에서는 부착길이와 보강재인 FRP 판의 보강간격을 변수로 부착실험을 실시하고 그에 따른 부착성능의 변화를 연구하고자 한다. 또한 표면매입 보강된 FRP 판의 계면파괴시 강도를 산정하기 위한 기존 제안식과의 비교를 통하여 그 적용성을 평가하고자 한다. 연구 결과, 매입된 FRP의 간격이 넓어질수록 FRP판의 인장파단과 함께 내력이 증가하는 양상을 보이는 반면에 FRP판의 간격이 좁을수록 콘크리트 할렬파괴가 지배하는 것으로 나타났다. 기존 제안식을 이용하여 실험 결과를 비교한 결과, FRP의 부착길이와 무리효과를 고려한 기존 제안식을 사용하여 표면매입 보강된 FRP의 부착강도를 적절히 예측할 수 있는 것으로 나타났다.

• 대한치과의사협회지
• /
• 제22권9호통권184호
• /
• pp.803-811
• /
• 1984

The purpose of this study was to research how temporary cementation effected on the bond strength of permanent cementation. Zinc phosphate, polycarboxylate and EBA ZOE cements were used as permanent cements, and as temporary cements Nogenol, Tempak and Dycal were used. The ninety six (96) specimens were prepared to measure the bond strength of permanent cements after treated with temporary cements for one week. The tensile stregths were measured with an Instron Universal Test Machine. The results of this study were obtained as follows: 1. With zinc phosphate cement, there was a tendency that the bond strengths of the group of temporarily cemented with Nogenol were increased, meanwhile they were decreased a little in the groups of Dycal and Tempak than those of the control group. 2. With polycarboxylate cement, there was a tendency that the bond strengths of the Control group were higher than those of experimental groups and they were decreased in order of Tempak, Noginol, and Dycal. 3. With EBA ZOE cement, there was a tendency that the bond strengths of the group of temporarily cemented with Tempak were increased a little, meanwhile they were decreased a little in the groups of Nogenol and Dycal than those of the Control group. 4. Among the permanent cements, the bond strengths of polycarbosylate cement were the highest and were followed in order of zinc phosphate cement and EBA ZOE cement.

• 대한치과보철학회지
• /
• 제41권6호
• /
• pp.732-746
• /
• 2003

Statement of problem. Soft lining materials, also referred to as tissue conditioning materials, tissue heating materials, relining materials, soft liners or tissue conditioners, were first introduced to dentistry by a plastic manufacturer in 1959. Since the introduction of the materials to the dental field, their material properties have been continually improved through the effort of many researchers. Soft lining materials have become widely accepted, particularly by prosthodontists, because of their numerous clinical advantages and ease of manipulation. Unfortunately, few reports have been issued upon the topic of increasing the bond strength between the base metal alloy used in cast denture bases and PMMA soft liner modified with 4-META, nor upon the pattern of debonding and material change in wet environment like a intra oral situation. Purpose. The purposes of this study were comparing the bond strength between base metal alloy used for the cast denture bases and PMMA soft liner modified with 4-META, and describing the pattern of debonding and material property change in wet environment like the intraoral situation. Material and Methods. This study consisted of four experiments: 1. The in vitro measurement of shear bond strength of the adhesive soft liner. 2. The in vitro measurement of shear bond strength of the adhesive soft liner after 2 weeks of aging. 3. A comparison of debonding patterns. 4. An evaluation the Relation time of modified soft liner. The soft liner used in this study was commercially available as Coe-soft (GC America.IL.,USA), which is provided in forms of powder and liquid. This is a PMMA soft liner commonly used in dental clinics. The metal primer used in this study was 4-META containing primer packed in Meta fast denture base resin (Sun Medical Co., Osaka, Japan). The specimens were formed in a single lap joint desist which is useful for evaluating the apparent shear bond strength of adhesively bonded metal plate by tensile loading. Using the $20{\times}20mm$ transparent grid, percent area of adhesive soft liner remaining on the shear area was calculated to classify the debonding patterns. To evaluate the change of the initial flow of the modified adhesive soft liner, the gelation time was measured with an oscillating rheometer (Haake RS150W/ TC50, Haake Co., Germany). It was a stress control and parallel plate type with the diameter of 35mm. Conclusion. Within the conditions and limitations of this study, the following conclusions were drawn as follows. 1. There was significant increase of bond strength in the 5% 4-META, 10% 4-META containing groups and in the primer coated groups versus the control group(P<0.05). 2. After 2 weeks of aging, no significant increase in bond strength was found except for the group containing 10% 4-META (P<0.05). 3. The gelation times of the modified soft liner were 9.3 minutes for the 5% 4-META containing liner and 11.5 minutes for the 10% 4-META liner. 4. The debonding patterns of the 4-META containing group after 2 weeks of aging were similar to those of immediaely after preparation, but the debonding pattern of the primer group showed more adhesive failure after 2 weeks of aging.

• Journal of Oral Medicine and Pain
• /
• 제30권2호
• /
• pp.269-276
• /
• 2005

재래의 고속핸드피스 bur를 이용한 와동 형성시 레진 접착력과 레이저를 사용한 와동형성시 접착력을 비교하여 레이저의 임상적용 여부를 평가하는 것이 본 연구의 목적이다. 총 96개 치아 표본의 법랑질 협면과 상아질 mid-coronal 부에 Er:YAG laser를 사용하여 조사하였다. 사전에 산부식을 시킨 군(48개)과 부식시키지 않은 군(48개)으로 구별하고 각각 flowable 접착시스템(Metafil Flo)과 자가중합 시스템(Clearfil FII New Bond)를 레진에 접착시켰다. 37$^{\circ}C$ 증류수에서 24시간동안 보관한 후 미세 결합강도(micro-tensile shear strength)를 만능시험기(universal testing machine)로 측정하여 다음과 같은 결과를 얻었다. 1. 법랑질과 상아질 모두 산부식 전처리를 한 경우에 산처리를 하지 않은 경우보다 결합강도가 높았고, 레이저 처리 표본에서도 마찬가지여서 레이저만으로 처리하는 것보다는 산부식 처리를 하는 것이 강도면에서 유리한 것으로 나타났다. 2. 법랑질의 경우 레이저 처치한 경우가 bur로 삭제한 경우보다 두 레진군 모두에서 결합강도가 낮았으나(P<0.05), 상아질의 경우에는 flowable 레진군에서는 두 군 간의 차이가 없었다. 3. 레이저 처치군내에서 상아질의 경우, 광중합 flowable 레진의 결합강도가 자가중합형 레진의 강도보다 높았으나, 법랑질에서는 차이가 없었다. 따라서 레이저를 활용하여 와동을 형성하는 것은 상아질까지 확대된 와동의 경우에 법랑질에 국한된 경우보다 결합강도면에서 유리하며, flowable레진을 사용하는 것이 자가중합형 레진보다 유리한 것으로 판단되었다.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2002년도 추계학술대회
• /
• pp.706-706
• /
• 2002

No Abstract, See Full Text

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.191-192
• /
• 2008