Browse > Article
http://dx.doi.org/10.4334/JKCI.2013.25.1.037

Bond Strength of Near Surface-Mounted FRP Plate in Concrete Corresponding to Space and Bond Length  

Seo, Soo-Yeon (Dept. of Architectural Engineering, Korea National University of Transportation)
Kim, Min-Sik (The Naeun Structural Engineering Co. Ltd.)
Publication Information
Journal of the Korea Concrete Institute / v.25, no.1, 2013 , pp. 37-43 More about this Journal
Abstract
Recently, experimental and analytical researches have been performed in order to find interface failure between FRP plate and concrete in near surface-mounted (NSM) retrofit using FRP plate. As a result, it was found that the bond strength between concrete and NSM FRP plate had a close relationship with shape of FRP, concrete compressive strength and bond length. However, research need is increasing about another factors such as suitable space of FRP plate and group effect. In this study, therefore, a bond test was performed with aforementioned factors and compared with a previous equation to verify its suitability for predicting bond strength of NSM FRP plate. From the test, it was found that the bond strength increased according to the increase of space of NSM FRP plates even if its bond length was same. The splitting failure of concrete governed when space of FRPs was too narrow and it changed to FRP's tensile failure with increase of the space. From the evaluation of test specimens using previous equation, it was found that the bond strength could be predicted properly with consideration of group effect.
Keywords
near surface-mounted retrofit; FRP plate; bond length; space of FRPs; interface failure;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Seo, S. Y., "Bond Strength of Near Surface-Mounted FRP Plate in RC Member," Journal of the Korea Concrete Institute, Vol. 24, No. 4, 2012, pp. 415-422. (doi: http://dx.doi.org/10.334/JKCI.2012.24.4.415)   과학기술학회마을   DOI   ScienceOn
2 EI-Hacha, R. and Rizkalla, S. H., "Near-Surface- Mounted Fiber-Reinforced Polyumer Reinforcements for Flexural Strengthening of concrete Structures," ACI Structural Journal, Vol. 101, No. 5, 2004, pp. 717-726.
3 Mohamed Ali, M. S., Oehlers, D. J., Friffith, M. C., and Seracino, R., "Interfacial Stress Transfer of Near Surface- Mounted FRP-to-Concrete Joints," Engineering Structures, Vol. 30, Issue 7, 2008, pp. 1861-1868. (doi: http://dx.doi. org/10.1016/j.engstruct.2007.12.006)   DOI   ScienceOn
4 Seracino, R., Jones, N., Ali, M., Page, M., and Oehlers, D., "Bond Strength of Near-Surface Mounted FRP Stripto- Concrete Joints," Journal of Composites for Construction, ASCE, Vol. 11, No. 4, 2007, pp. 401-409. (doi: http://dx. doi.org/10.1061/(ASCE)1090-0268(2007)11:4(401))   DOI   ScienceOn
5 Chung, W. T., "Flexural Behavior of Reinforced Concrete Beams Strengthened with NSM CFRP Reinforcements Considering the Equivalent Section," Doctoral Thesis in Civil and Environmental Engineering, Myongji University, 2009, pp. 57-221.
6 Seo, S. Y., Oh, J. G., and Choi, K. B., "Bond Capacity of Concrete Member Strengthened by Various Methods Using FRP Plate," Journal of Architectural Institute of Korea, Vol. 27, No. 8, 2011. pp. 55-63.   과학기술학회마을
7 Seo, S. Y., Yoon, S. J., Kwon, Y. S., and Choi, K. B., "Bond Behavior between Near-Surface-Mounted Fiber Reinforced Polymer Plates and Concrete in Structural Strengthening," Journal of the Korea Concrete Institute, Vol. 23, No. 5, 2011, pp. 675-682. (doi: http://dx.doi.org/10.4334/JKCI.011.23.5.675)   과학기술학회마을   DOI   ScienceOn
8 Lim, D. H., "An Experimental Study on the Flexural Behavior of RC Beams Strengthened with NSM and EBR CFRP Strips," Journal of the Korea Concrete Institute, Vol. 20, No. 5, 2008, pp. 601-609.   과학기술학회마을   DOI   ScienceOn
9 ACI's 2001 Manual of Concrete Practice, Report on Fiber- Reinforced Polymer(FRP) Reinforcement for Concrete Structures(ACI 440R-07), American Concrete Institute, Famington Hills, MI, 2011.