• 한국산업융합학회 논문집
• /
• 제24권3호
• /
• pp.373-376
• /
• 2021

Tested the flexural strength and maximum load of two types of dental 3 D printed temporary tooth materials of the DLP method. The average flexural strength was 206.98 MPa in the test group and 139.77 MPa in the control group. The average flexural strength of the experimental group was 67.21 MPa higher than that of the control group. In the maximum load experiment, an average of 44.16N in the experimental group and 37.31N in the control group were measured. The average value of 6.85N was higher in the experimental group, and the durability of the artificial tooth restoration was improved.

• Restorative Dentistry and Endodontics
• /
• 제38권2호
• /
• pp.85-89
• /
• 2013

When a patient with a fractured anterior tooth visits the clinic, clinician has to restore the tooth esthetically and quickly. For esthetic resin restoration, clinician can use 'Natural Layering technique' and an index for palatal wall may be needed. In this case report, we introduce pre-restoration index technique on a Class IV defect, in which a temporary filling material is used for easy restoration. Chair-side index fabrication for Class IV restoration is convenient and makes a single-visit treatment possible.

• 대한전자공학회논문지SP
• /
• 제41권3호
• /
• pp.163-174
• /
• 2004

치과 분야에서는 치아교정이나 수술 시뮬레이션을 위해서 각 치아를 개별적으로 조작할 수 있는 3차원 치아모델이 필요하다. 치아 CT 영상으로부터 이러한 치아모델의 재구성을 위해서는 각 치아를 이웃한 치아나 치조골로부터 정확하게 분리할 수 있어야 한다. 본 연구에서는 치아 영역을 효과적으로 분리하기 위한 영상정규화 방안과 최적임계화방안을 제안한다. 제안된 방법은 연속적인 CT 영상 슬라이스들에서 치아영역의 형태와 밝기는 점진적으로 변한다는 사실을 근거로 이전 슬라이스에서 추정된 임계치를 이용하여 현 슬라이스의 임시치아경계를 결정하고 이것을 바탕으로 보다 정확한 임계치를 계산한다.

• Restorative Dentistry and Endodontics
• /
• 제37권1호
• /
• pp.29-33
• /
• 2012

Objectives: The purpose of this study was to evaluate the microleakage of 4 temporary materials in teeth with Class II-type endodontic access preparations by using a glucose penetration model. Materials and Methods: Glucose reaction test was performed to rule out the presence of any reaction between glucose and temporary material. Class II-type endodontic access preparations were made in extracted human premolars with a single root (n = 10). Each experimental group was restored with Caviton (GC), Spacer (Vericom), IRM (Dentsply-Caulk), or Fuji II(GC). Microleakage of four materials used as temporary restorative materials was evaluated by using a glucose penetration model. Data were analyzed by the one-way analysis of variance followed by a multiplecomparison Tukey test. The interface between materials and tooth were examined under a scanning electron microscope (SEM). Results: There was no significant reaction between glucose and temporary materials used in this study. Microleakage was significantly lower for Caviton and Spacer than for Fuji II and IRM. SEM observation showed more intimate adaptation of tooth-restoration interfaces in Caviton and Spacer than in IRM and Fuji II. Conclusions: Compared to IRM and Fuji II, Caviton and Spacer can be considered better temporary sealing materials in Class II-type endodontic access cavities.

• 대한치과의사협회지
• /
• 제54권6호
• /
• pp.438-446
• /
• 2016

Severe tooth wear may cause the pathologic change of the TMJ and masticatory muscles, unesthetic facial appearance, pathogenic pulp and occlusal disharmony. Treating patients with severely worn dentition often requires full mouth rehabilitation with increasing vertical dimension. Proper diagnosis and treatment planning are important for esthetic and functional definitive restorations and the long term stability of the neuromuscular system and the TMJ. In this case, 66 year-old female presented with generalized worn dentition. Based on assessment, pathologic destruction of teeth structure on entire dentition was caused by masticatory force and diet habit without loss of vertical dimension. Subsequently, 3 mm increase of vertical dimension that based on incisor for tooth restoration and esthetic improvement was determined. After 8 weeks stabilization period with temporary fixed prostheses, definitive prostheses were fabricated. After 6 months follow up period, satisfactory outcomes were attained both functional and esthetic aspects through this procedure.

• 대한치과교정학회지
• /
• 제49권5호
• /
• pp.279-285
• /
• 2019

Objective: This study evaluated the efficiency of anchorage provided by temporary anchorage devices (TADs) in maxillary bicuspid extraction cases during retraction of the anterior teeth using a fixed appliance. Methods: Patients aged 12 to 50 years with malocclusion for which bilateral first or second maxillary bicuspid extractions were indicated were included in the study and randomly allocated to the TAD or control groups. Retraction of the anterior teeth was achieved using skeletal anchorage in the TAD group and conventional dental anchorage in the control group. A computed tomography (CT) scan was performed after alignment of teeth, and a second CT scan was performed at the end of extraction space closure in both groups. A three-dimensional superimposition was performed to visualize and quantify the maxillary first molar movement during the retraction phase, which was the primary outcome, and the stability of TAD movement, which served as the secondary outcome. Results: Thirty-four patients (17 in each group) underwent the final analysis. The two groups showed a significant difference in the movement of the first maxillary molars, with less significant anchorage loss in the TAD group than that in the control group. In addition, TAD movement showed only a slight mesial movement on the labial side. On the palatal side, the mesial TAD movement was greater. Conclusions: In comparison with conventional dental anchorage, TADs can be considered an efficient source of anchorage during retraction of maxillary anterior teeth. TADs remain stable when correctly placed in the bone during the anterior tooth retraction phase.

• 대한치과보철학회지
• /
• 제62권1호
• /
• pp.72-81
• /
• 2024

구치부 지지 상실로 부적절한 교합을 보이는 환자를 전악 보철 수복하기 위해서는 적절한 교합수직고경의 증가와 중심위에서 안정된 교합을 나타내는 보철물의 제작이 필요하다. 본 증례는 대구치가 상실되고 치아 마모를 보이는 환자에서 임플란트 보철과 지르코니아 전부 전장관을 사용해 완전구강회복한 증례이다. 증가된 교합수직고경에의 적응 여부를 평가하기 위해 occlusal splint 및 임시 수복물이 사용됐으며, 임시 수복물의 전방 유도를 따르는 최종 보철물을 제작함으로써 안정된 교합 회복을 이룰 수 있었다.

• 구강회복응용과학지
• /
• 제36권4호
• /
• pp.272-281
• /
• 2020

영구치가 선천 결손된 아동에서 유치가 발거되면, 교정적으로 공간을 폐쇄하거나, 성장이 끝나고 임플란트 수복을 시행할 때까지 공간을 유지하게 된다. 그러나 점차 치조골은 위축되고, 향후 보철 수복을 어렵게 하거나 비심미적인 결과를 야기할 수 있으므로, 임상의는 결손 공간과 치조골의 유지 모두 고려해야 한다. 본 증례에는 2개의 하악 전치가 결손된 환아에서 교정용 골성 고정원을 이용한 임시 보철 수복을 시행한 증례이다. 2개의 골성 고정원을 치조정 2 - 3 mm 하방에 수평으로 식립하였으며, 강선이 삽입된 인공치로 고정하였다. 2년의 경과 관찰동안 치은 염증이나 골성 고정원의 탈락은 발생하지 않았다. 또한 방사선 평가에서 인접 치조골의 성장이 저해되지 않았으며, 치조골 폭경 역시 양호하게 유지되었다.

• Restorative Dentistry and Endodontics
• /
• 제44권4호
• /
• pp.39.1-39.8
• /
• 2019

The present report presents a case of dens invaginatus (DI) in a patient with 4 maxillary incisors. A 24-year-old female complained of swelling of the maxillary left anterior region and discoloration of the maxillary left anterior tooth. The maxillary left lateral incisor (tooth #22) showed pulp necrosis and a chronic apical abscess, and a periapical X-ray demonstrated DI on bilateral maxillary central and lateral incisors. All teeth responded to a vitality test, except tooth #22. The anatomic form of tooth #22 was similar to that of tooth #12, and both teeth had lingual pits. In addition, panoramic and periapical X-rays demonstrated root canal calcification, such as pulp stones, in the maxillary canines, first and second premolars, and the mandibular incisors, canines, and first premolars bilaterally. The patient underwent root canal treatment of tooth #22 and non-vital tooth bleaching. After a temporary filling material was removed, the invaginated mass was removed using ultrasonic tips under an operating microscope. The working length was established, and the root canal was enlarged up to #50 apical size and obturated with gutta-percha and AH 26 sealer using the continuous wave of condensation technique. Finally, non-vital bleaching was performed, and the access cavity was filled with composite resin.

• 구강회복응용과학지
• /
• 제23권3호
• /
• pp.259-268
• /
• 2007

purpose: This study was to evaluate the shear bond strength of Lithium Disilicate Glass-Ceramic by removable method of temporary cement on the abutment tooth. Material and Method: Sixty molar teeth of human with the occlusal surface up were mounted in acrylic resin blocks. The 45 specimens were prepared to exposure dentin by diamond bur and the eugenol-containing temporary cement($Cavitec^{TM}$ ($KERR^{(R)}$, U.S.A)was applied to the dentin surfaces. After initial removal of the cement with a dental explorer, the specimens were divided into 4 groups of 15 specimens each. The dentin surfaces of the specimens were treated by rotary instrument with as follow pastes: $Zircate^{(R)}$ prophy paste(Dentsply, U.S.A), Radent Prophy Paste(Pascal company,inc. U.S.A), and Dental pumice(Wip mix corporation,U.S.A). An adhesive resin luting agent(Variolink $II^{(R)}$, Ivoclar Vivadent, Leichtenstein) including Monobond-S and $Excite^{(R)}$ was applied to all specimens. The ceramic specimens were made with an A1 ingot of IPS Empress $II^{(R)}$ (Ivoclar Vivadent, Leichtenstein). After the specimens were stored in distilled water for 48hr, the shear bond strength(MPa) was measured by a Universal testing machine(Zwick 145641, Zwick, Germany) at a 1mm/min cross-head speed. The data were statistically analyzed by one-way ANOVA and Duncan's multiple range test. Results: In all group, there were no significant differences in comparison with the control group(p>0.05). The pattern of most failure showed the mixed type of cohesive and adhesive failure. Conclusion: Resin bond strength of IPS Empress $II^{(R)}$ was not affected by removal method of the temporary cement.