• Bulletin of the Korean Chemical Society
• /
• 제25권3호
• /
• pp.351-356
• /
• 2004

Selected MPEG-b-PDLLA block copolymers have been synthesized by ring-opening polymerization with systematic variation of the chain lengths of the resident hydrophilic and hydrophobic blocks. The size and shape of the micelles that spontaneously form in solution are then controlled by the characteristics of the block copolymer template. All the materials prepared in this study showed the tunable pore size of 20-80 ${\AA}$ with the increase of hydrophobic chain lengths and up to 660 $m^2$/g of specific surface area. The formation mechanism of these nanoporous structures obtained by controlling the micelle size has been confirmed using both liquid and solid state $^{13}C\;and\;^{29}Si$ NMR techniques. This work verifies the formation mechanism of nanoporous structures in which the pore size and wall thickness are closely dependent on the size of hydrophobic cores and hydrophilic shells of the block copolymer templates.

• KSBB Journal
• /
• 제18권1호
• /
• pp.65-69
• /
• 2003

Pentoxifylline MIPs에서 시료와 기능성 단위체 사이에는 수소결합이 형성되었다. 수소결합의 능력은 분자구조상 질소원자의 위치에 의해 결정되어졌다. Pentoxifylline과 caffeine theophylline MIPs 모두는 구조상 유사한 시료들과 affinity가 증가하는 결과를 얻어냈다. 특히 caffiene-theophylline MIPs에서 높은 수치의 체류인자와 IF를 얻었다. 이러한 결과로 적합한 복합 주형분자를 사용할 때 우리가 원하는 목적시료만을 선택적으로 분리 할 수 있고 그러므로 solid phase extraction에 사용되기에 적합하다는 결과를 얻어냈다.

• Carbon letters
• /
• 제18권
• /
• pp.11-17
• /
• 2016

Monolithic carbon foams with hierarchical porosity were prepared from polyurethane templates and resol precursors. Mesoporosity was achieved through the use of soft templating with surfactant Pluronic F127, and macroporosity from the polyurethane foams was retained. Conditions to obtain high porosity materials were optimized. The best materials have high specific surface areas (380 and 582 m² g^-1, respectively) and high electrical conductivity, which make them good candidates for supports in sensors. These materials showed an almost linear dependence between the potential and the pH of aqueous solutions.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.374-375
• /
• 2006

Three-dimensional artificial crystals with periodicity corresponding to terahertz wave lengths were fabricated by self-assembling monosized metal spherical particles. The metal crystals were weakly sintered to utilize them as templates. The metal templates were inverted to air spheres crystal embedded in dielectric resin though infiltration and etching. The resulting resin inverted crystals clearly presented the photonic stop gaps within terahertz wave region and the frequencies of the gaps were confirmed to agree well with calculation by plane wave expansion method.

• 한국자동차공학회논문집
• /
• 제6권6호
• /
• pp.7-14
• /
• 1998

A graphic user interface program for the design of vehicle suspension system is developed in this work. Graphic templates are designed by using a graphic language and a library and given to users for interactive data input. Several suspension types are graphically given, and the information of hard points can be directly provided on the graphic templates by users. The information is saved in a data structure which can be efficiently accessed, and transformed into another data format. The data transformation is for the interface to an analyzer by which suspension design characteristics can be calculated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.1002-1005
• /
• 2003

This paper presents a new template matching method for finding facial feature points. Instead of matching each template to its corresponding feature point separately the present method matches a set of element templates simultaneously. The set of templates can be placed on the space predefined by the geometrical characteristics of human faces. As a result, the search area for template matching is very small compared with a conventional method. This makes the presented method very robust and accurate. Experiment results show that the presented method results in good performance In various illuminance environments and poses.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.557-558
• /
• 2006

The mechanical properties of micro-hardness and internal stress of Ni-Fe alloy thin film made by electrodeposition method have been measured as a function of bath composition and current density. And also the microstructure of $200{\AA}$ Ni-Fi nanowires made using anodic aluminum oxide(AAO) templates by electrodeposition method have been observed by SEM as a function of ultrasonic treatment time and bath composition.

• The Plant Pathology Journal
• /
• 제39권1호
• /
• pp.141-148
• /
• 2023

Black shoot blight disease caused by Erwinia pyrifoliae has serious impacts on quality and yield in pear production in Korea; therefore, rapid and accurate methods for its detection are needed. However, traditional detection methods require a great deal of time and fail to achieve absolute quantification. In the present study, we developed a droplet digital polymerase chain reaction (ddPCR) method for the detection and absolute quantification of E. pyrifoliae using a pair of species-specific primers. The detection range was 10³-10⁷ copies/ml (DNA templates) and cfu/ml (cell culture templates). This new method exhibited good linearity and repeatability and was validated by absolute quantification of E. pyrifoliae DNA copies from samples of artificially inoculated immature pear fruits. Here, we present the first study of ddPCR assay for the detection and quantification of E. pyrifoliae. This method has potential applications in epidemiology and for the early prediction of black shoot blight outbreaks.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.680-681
• /
• 2015

This study develops an algorithm that automatically performs reverse engineering on three-dimensional (3D) sweeping shapes using a user's pre-defined feature templates and 3D point cloud data (PCD) of sweeping shapes. Existing methods extract 3D sweeping shapes by extracting points on a PCD cross section together with the center point in order to perform curve fitting and connect the center points. However, a drawback of existing methods is the difficulty of creating a 3D sweeping shape in which the user's preferred feature center points and parameters are applied. This study extracts shape features from cross-sectional points extracted automatically from the PCD and compared with pre-defined feature templates for similarities, thereby acquiring the most similar template cross-section. Fitting the most similar template cross-section to sweeping shape modeling makes the reverse engineering process automatic.

• Archives of Metallurgy and Materials
• /
• 제63권3호
• /
• pp.1497-1502
• /
• 2018

Macroporous silica fibers having spherical cavities were fabricated by electrospinning using the spinning solution prepared from the mixed dispersion of tetraethylorthosilicate (TEOS) and polystyrene nanospheres as precursor and sacrificial templates, respectively, by injection through metallic nozzle. By applying electric field, the electro-spun fibers obtained by evaporation-driven self-assembly were collected on flat substrate or rotating drum, followed by the removal of the templates by calcination. The sound absorption coefficient of the porous fibers was measured by impedance tube, and the measured value was larger than 0.9 at high frequency region of incident waves. The surface of the resulting fibers was modified using fluorine-containing silane coupling agent to produce superhydrophobic fibrous materials to prevent the infiltration of humidity.