• 한국융합학회논문지
• /
• 제10권4호
• /
• pp.107-113
• /
• 2019

1인가구의 가장 높은 비율을 차지하는 연령층은 60대 이상의 노인이다. 그들의 상당수가 경제적으로 어려운 상황에 처해있어 낙후된 주거공간에 거주한다. 노인의 주거공간의 창문은 존재하지 않거나 창문으로써의 역할을 제대로 하지 못하는 경우가 많다. 그들은 우울증, 고독사 등 사회적 문제에 취약한 상태로 노출되어 있다. 그래서 비상상황에 대한 대처능력이 현저히 떨어진다. 본 논문은 낙후된 주거공간에 거주하는 1인가구 중 60대 이상 노인을 대상으로 하는 외부 환경 정보 반영 대화형 창문 인터페이스를 제안한다. 본 콘텐츠는 별도의 공간과 비용이 요구되지 않는 보급형 TV 혹은 PC 모니터를 활용한다. 노인이 사용하는데 어려움이 없는 직관적인 터치센싱을 통해 손을 인식하면 현재 외부 환경을 반영하는 날씨 영상, 온도 정보를 제공한다. 보다 중요한 노인의 비상상황에 대비하여 알림소리, SMS전송 서비스를 제공한다. 본 콘텐츠를 통해 사용자는 정서적 안정을 느낄 수 있고 비상상황에 빠르게 대처할 수 있다.

• 공업화학
• /
• 제31권6호
• /
• pp.603-606
• /
• 2020

본 논문에서는 수산화기를 음이온으로 이미다졸리움, 즉 1-benzyl-3-butylimidazolium [BzBIM]을 양이온으로 구성한 친수성의 알칼라인 이온성 액체 전해질을 합성하였다. 합성한 이온성 액체의 전기화학적, 물리적 및 구조적 특성을 순환전압전류법, 이온전도도, 점도, 열중량분석기, 시차 주사 열량 측정법, FT-IR과 1H-NMR을 이용하여 측정하였다. 합성된 이온성 액체는 0.1 M KCl 전해질과 유사한 높은 이온전도도와 낮은 점도를 나타내었으며, 또한 약 4.4 V 이상의 전위창을 나타내었다. 따라서 상기 이온성 액체는 대체 전해질로 다양한 에너지 및 환경 응용분야에 활용될 수 있을 것으로 전망된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.73-76
• /
• 2000

A Scene Based Technique(SBT) that corrects linear array infrared detector's nonuniformity is proposed. Basically, this technique dispenses with using temperature references on a linear array infrared detector. To correct the nonuniformity of infrared images, we use three methods. Firstly, we detect bad channels by using the information which is cumulated all the same line pixels. Secondly, a variable window method is applied to compensate more accurately. Thirdly, an adaptive method which updates gain and offset coefficient is used only on a stationary region. These results are demonstrated on a computer simulation with various images. As a result, the nonuniformity is corrected completely, so that images are enhanced and PSNR(peak signal to noise ratio) is improved much.

• 설비공학논문집
• /
• 제7권2호
• /
• pp.287-297
• /
• 1995

In this study, the geometry consists of a two-dimensional rectangular enclosure with localized heating from below. The size and the location of the heater on the floor has been varied, and one of the vertical walls remains at a low temperature simulating a cold window. The governing equations for momentum, energy and continuity, which are coupled with turbulent equations have been solved using a finite volume method. A low Reynolds number $k-{\varepsilon}$ model has been incorporated to solve the turbulent kinetic energy and the dissipation rate. The heat transfer characteristics and the thermal environmental characteristics of the room have been obtained for various system parameters in a room with a partially heated floor.

• 한국안전학회지
• /
• 제14권3호
• /
• pp.40-47
• /
• 1999

A numerical study on gaseous explosion was carried out to predict the transient pressure behavior with the partial rupture in confined vessels. Equations, assumptions and solutions for central ignition of premixed gases in closed spherical vessels are proposed with various equivalence ratios of gas fuel, as $CH_4$ and $C_3H_8$, vent areas and vent opening pressures. Given vent opening pressure in a vessel, the magnitude of second peak pressure results from the vent areas and burning velocity, varied by equivalence ratio of gas fuel. In a living room of an apartment, the higher second peak pressure than the vent pressure is not appeared due to its large window areas. As vent opening pressure is higher, the larger damage by gaseous explosion is expected and the larger vent area is necessary for relieving the damage. In the same concentration, the gaseous explosion by propane rather than methane shows the larger damage due to its higher adiabatic flame temperature and equivalence ratio.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.172-175
• /
• 2006

Steam reforming of methane using Xe-arc solar simulator was studied for converting solar radiation into energy foam that one can readily utilize. The Xe-arc lamp produce a spectrum similar to that of the sun. SiC ceramic foam, resist high temp.$(>900^{\circ}C)$, is used to catalytically active foam absorber, and to support of reforming catalyst. The catalyst on the surface of foam were directly irradiated with solar simulated xe-light in order to carry out the steam reforming of methane. The reactor was made of stainless steel and quartz window was located on a place of the xe-light irradiation and temperature was controlled using K-type thermocouple in contact with catalyst located inside the reactor. The result show that a possibility of solar reforming using catalytically active foam absorber is exist.

• 한국연소학회지
• /
• 제10권3호
• /
• pp.17-24
• /
• 2005

A sub-millimeter scale catalytic combustor with a simple plate-shaped combustion chamber was fabricated. A porous ceramics support coated with platinum catalyst was placed in the chamber. The combustor has a gallium arsenide window on the top that is transparent to infrared ray. The temperature distribution in the combustion chamber was measured using infrared thermal imager while hydrogen-air premixture is steadily supplied to the combustor. The area where the catalytic reaction took place broaden for higher flow rate and lower equivalence ratio made activated area in the combustion chamber broaden. The amount of coated platinum catalyst did not affect the reaction. Stop of reaction, which is similar to flame quenching of conventional combustion, was investigated. Large content of heat generation and broad activated area are essential criteria to prevent stop of reaction that has a bad effect on the combustor performance.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 춘계학술대회
• /
• pp.57-59
• /
• 1994

In this paper, we present the software part of the intelligent data processing unit (IDPU), which plays an important role in SiMACS. The software system processes ECG, EEG, EMG, blood pressure, respiration, temperature signals, and extracts some information about patient conditions. It displays the patient condition information and the signal data synchronously, and manages them together with other patient personal data in a network-based client/server environment. The software system is designed in an object-oriented paradigm, and implemented in C++ as a window-based application program.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.341-346
• /
• 2000

A numerical simulation has been carried out for the engine cooling system. It is the important element to analysis of heat transfer process in cooling system for an automotive engine. Thus, the purpose of this simulator is to present useful information at the early stages of the design of the cooling system by enabling the development engineer to predict performance trends. This program has useful window interface for analysis of the cooling system and it is convenient for user to control data with relational database. The system was simulated and compared with experimental data. As a result, the inlet, outlet temperature of the radiator by the simulator agrees well with it. It is concluded that this simulation program is available in developing the cooling system for a new car.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1078-1082
• /
• 2003

A feasibility study for the fabrication of master replication with nanostructures by Nanoimprint Lithography (NIL) was investigated for application of polymer Photonic Bandgap (PBG) devices used in photonic IC. Large area gratings of $9{\times}15(mm^2)$ with p = 400 nm was successfully embossed on PMMA on silicon wafer and the embossing parameters (temperature, pressure, time) were established. A precise control of $O_2$ plasma Reactive Ion Etching (RIE) process time allowed window opening over the whole area despite the presence of wafer bending. Master replication with aspect ratio 1 was successfully fabricated, but master replication with aspect ratio 3 needs to optimize parameters. All replications were done in a NIL process.