• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.578-584
• /
• 2003

This paper presents a method to investigate the characteristics of a ball bearing and the dynamics of a HDD spindle system due to temperature variation. Finite element model is developed fer the rotating and stationary parts of a HDD spindle system separately to determine their thermal deformations by using ANSYS, a finite element program. Then, the relative position of the rotating part with respect to the stationary part is determined by solving the equilibrium equation of the contact force between upper and lower ball bearings. The validity of the proposed method is verified by comparing the theoretical natural frequencies of a HDD spindle system with the experimental ones before and after temperature variation. It shows that the elevated temperature results in the increase of contact angle and the decrease of bearing deformation, contact force and bearing stiffness, which result in the decrease of the natural frequencies of a HDD spindle system.

• Journal of Bio-Environment Control
• /
• v.19 no.3
• /
• pp.165-170
• /
• 2010

This experiment was conducted to select the affected main factors on growth and fruit characteristics of 'Fuyu' persimmon (Diospyros kaki Thunb.) in 25 factors of air temperature factors in Naju. Mean air temperature, cumulative temperature and days for March and April of 25 factors were the highest annual variation. Number of the first and second principal components extracted from 25 air temperature factors were 14 and 3 factors related with mean temperature for annul and April, and cumulative contribution of these was 52.2%. Also the affected years by the first principal components were 1990, 1980 and 1986. Annual standard deviation on leafing, flowering and maturing date were 4.0~6.7 days range, and flowering date and days from leafing to flowering had the highest coefficient of variation. Annual variation of days from flowering to maturing date was affected by greatly mean air temperature and days of cumulative temperature in October, days from March 1 to leafing date was affected by cumulative temperature for growing period, days from leafing to flowering date was affected by mean air temperature in April. Annual variation of fruit weight was affected by mean air temperature for March and October.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2133-2138
• /
• 2013

In this paper, the variation of a steep subthreshold slope at elevated temperature in nanowire n-channel junctionless and inversion mode MuGFETs has been compared. It has been observed that the subthreshold slopes are increased with the increase of the operation temperature in junctionless and inversio-mode transistors. The variation of a subthreshold slope with operation temperature is more significant in junctionless transistor than inversion-mode transistor. The temperature dependence on the variation of a subthreshold slope for different fin widths shows a similar behavior regardless of fin width. From the temperature dependence on the variation of a subthreshold slope for different substrate biases, it has been observed that the variation of a subthreshold slope is less significant when the substrate bias was applied. It is worth noting that one can achieve a subthreshold slope of below 41mV/dec at elevated temperature of 400K using the junctionless MuGFETs with a positive substrate bias.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.2
• /
• pp.304-309
• /
• 2015

Applicable range of Photoplethysmography (PPG) becomes wider as a non-invasive physiological measurement technique. However, PPG waveform is easy to be distorted by ambient light or vascular variation from temperature changes. Especially, irregular variation of PPG waveform caused by ambient temperature not only severely distorts the PPG, but also leads miss interpretation in clinical applications. Therefore, the investigation of between temperature and PPG waveform is quite important in using PPG. The purpose of this research is to quantify the PPG waveform characteristic and to investigate the waveform variation following the temperature change on measuring site. To quantify the fluctuation of PPG waveform, we use two techniques; detrended fluctuation analysis (DFA) and AC/DC analysis of PPG. We record PPG under temperature stress, which applied by medical use heat pack ($40^{\circ}C$) and ice pack ($0^{\circ}C$). Ten participants were applied to the experiment, and the result was evaluated to approve the temperature effect with statistical method, Wilcoxon signed rank test. The result shows that the AC component (p<0.05) and perfusion index DFS scale exponent (p<0.01) of PPG have the significance to temperature stress except for a DC component of PPG.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.8
• /
• pp.831-838
• /
• 2013

This paper focused on the design of an efficient temperature controller for a plant with a wide range of operating temperatures. The greater the temperature difference a plant has, the larger the nonlinearity it is exposed to in terms of heat transfer. For this reason, we divided the temperature range into five sections, and each was modeled using ARMAX(auto regressive moving average exogenous). The movement of the dominant poles of the sliced system was analyzed and, based on the variation in the system parameters with temperature, optimal control parameters were obtained through simulation and experiments. From the configurations for each section of the temperature range, a temperature-based gain-scheduled controller (TBGSC) was designed for parameter variation of the plant. Experiments showed that the TBGSC resulted in improved performance compared with an existing proportional integral derivative (PID) controller.

• Geomechanics and Engineering
• /
• v.32 no.3
• /
• pp.293-305
• /
• 2023

To ensure the safety of underground infrastructures, ground can sometimes be first treated by cement slurry and then stabilized using artificial ground freezing (AGF) technique before excavation. The hydration heat produced by cement slurry increases the soil temperature before freezing and results in an extension of the active freezing time (AFT), especially when the Metro Jet System (MJS) treatment is adopted due to a high cement-soil ratio. In this paper, by taking advantage of an on-going project, a case study was performed to evaluate the influence of MJS and AGF on the ground temperature variation through on-site measurement and numerical simulation. Both on-site measurement and simulation results reveal that MJS resulted in a significant increase in the soil temperature after treatment. The ground temperature gradually decreases and then stabilized after completion of MJS. The initiation of AGF resulted in a quick decrease in ground temperature. The ground temperature then slowly decreased and stabilized at later freezing. A slight difference in ground temperature exists between the on-site measurements and simulation results due to limitations of numerical simulation. For the AGF system, numerical simulation is still strongly recommended because it is proven to be cost-effective for predicting the ground temperature variation with reasonable accuracy.

• Journal of Environmental Science International
• /
• v.12 no.3
• /
• pp.257-263
• /
• 2003

Oceanographic features around Korean waters related to the global change were studied by analysis of the longterm variation of water temperature, dissolved oxygen, sea level of the surface layer with 1$^{\circ}C$ temperature, spatial position of the subpolar front in the East Sea/Japan Sea (the East sea hereafter) and the Wolf Sunspot Number. With the global warming, the temperature of Korean waters has been increased 0.5∼1.0$^{\circ}C$ for 33years (1968∼2000). In case of the dissolved oxygen in the East Sea has been decreased 0.46$m\ell$/$\ell$. Year to year vertical fluctuations of the monthly anomalies of the surface layer with 1$^{\circ}C$water in the East Sea have predominant periods with 15years as the longterm variation of Arctic climate, 12 and 18years as the El Nino-Southern Oscillation. Spatial position of the subpolar front in the East Sea moved to northern part of the sea from the southern part of the sea with the increasing sea surface temperature. The relationship between the number of Wolf Sunspot and the anomalies of sea surface temperature was very closer after the late of 1980s than those before the early of 1980s in Korean waters.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.6
• /
• pp.514-519
• /
• 2012

Abalone culture is one of important coastal fisheries off Wando in the southeast coast of Korea. Since cage culture for abalones was popularized, Understanding of temperature variation, which is important to raise abalones and to prevent their mass mortalities, is necessary. We analyzed temperature data from 2005 to 2009 obtained at Sinji-do and Cheongsan-do off Wando. Sinji-do, which is relatively close to land, had yearly wide range of temperature and rate of temperature variation. It is likely to be caused by heating of solar radiation in summer and cooling in winter at the shallow area. Rate of temperature variation in autumn was higher than that in spring. In summer short term variation of temperature corresponding tidal period was distinguished clearly. Diurnal temperature range, abrupt temperature change, was larger open sea. Comparison between temperatures of two stations and favorable raising conditions of abalones showed that Cheongsan-do, located out to sea, appears to be more appropriate than Sinji-do.

• Journal of Environmental Science International
• /
• v.19 no.1
• /
• pp.81-87
• /
• 2010

Cool island intensity urban green space was investigated based in Dalsung Park, that is one of the largest parks in Daegu. Cool island intensity(CII), which is defined as the temperature difference between the green space and its surrounding built-up areas, shows time variations. A through-year measurement(2008-2009) of ground level air temperature revealed seasonal variation and relationship to the atmospheric condition of CII. The temperature variation in the park and the reference downtown Daegu was as same order as CII. The noontime CII is larger in summer than that in winter due to the leaf fall of the park trees. On the other hand, seasonal variation of nighttime CII is not so clear. The nighttime CII was larger under the stable atmosphere.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.4
• /
• pp.121-128
• /
• 1996

In order to examine spindle deformation characteristics that affects the performance of dynmic cutting acuracy due to tool weight variation in a experimental spindle. thermal deformation value of operrative spindle by the axial displacement and the radial run out was measured according to the rise of spindle temperature through the laps of operation time and the change of rotational speed under the tool weight variation. A qualitative summary is as follows ; 1) The results show that the tool weight affcets the spindle temperature variation in a experimental spindle. 2) Radial run out and axial displacement was measured according to the rise of the spindle temperature and the performance of dynamic cutting accuracy was affected by the tool weight variation. 3) Axial displacement is 1.3 times larger than the radial run out in a experimental spindle conditions. 4) Axial displacement is continuously elongated when the tool weight is repeatly exchanged since the spindle themal deformaion, however, when the same tool weight is used. the displacement is still constant.